Start 2009-05-09T16:19:29
ActivePerl-818 CPAN-1.9351
Going to read '/home/fly818/var/cpan/Metadata'
  Database was generated on Sat, 09 May 2009 10:27:02 GMT
Running make for B/BI/BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz
Checksum for /net/nas/data/cpan/authors/id/B/BI/BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz ok
CPANPLUS-Dist-Build-0.28
CPANPLUS-Dist-Build-0.28/inc
CPANPLUS-Dist-Build-0.28/inc/Module
CPANPLUS-Dist-Build-0.28/inc/Module/Install.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Fetch.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Makefile.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Base.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Metadata.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Can.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/WriteAll.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/Win32.pm
CPANPLUS-Dist-Build-0.28/inc/Module/Install/AutoLicense.pm
CPANPLUS-Dist-Build-0.28/lib
CPANPLUS-Dist-Build-0.28/lib/CPANPLUS
CPANPLUS-Dist-Build-0.28/lib/CPANPLUS/Dist
CPANPLUS-Dist-Build-0.28/lib/CPANPLUS/Dist/Build.pm
CPANPLUS-Dist-Build-0.28/lib/CPANPLUS/Dist/Build
CPANPLUS-Dist-Build-0.28/lib/CPANPLUS/Dist/Build/Constants.pm
CPANPLUS-Dist-Build-0.28/t
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN/authors
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN/authors/01mailrc.txt.gz
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN/modules
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN/modules/02packages.details.txt.gz
CPANPLUS-Dist-Build-0.28/t/dummy-CPAN/modules/03modlist.data.gz
CPANPLUS-Dist-Build-0.28/t/inc
CPANPLUS-Dist-Build-0.28/t/inc/conf.pl
CPANPLUS-Dist-Build-0.28/t/99_pod.t
CPANPLUS-Dist-Build-0.28/t/src
CPANPLUS-Dist-Build-0.28/t/src/xs
CPANPLUS-Dist-Build-0.28/t/src/xs/Foo-Bar-0.01.tar.gz
CPANPLUS-Dist-Build-0.28/t/src/noxs
CPANPLUS-Dist-Build-0.28/t/src/noxs/Foo-Bar-0.01.tar.gz
CPANPLUS-Dist-Build-0.28/t/99_pod_coverage.t
CPANPLUS-Dist-Build-0.28/t/01_CPANPLUS-Dist-Build-Constants.t
CPANPLUS-Dist-Build-0.28/t/02_CPANPLUS-Dist-Build.t
CPANPLUS-Dist-Build-0.28/t/dummy-perl
CPANPLUS-Dist-Build-0.28/t/dummy-perl/.hidden
CPANPLUS-Dist-Build-0.28/Changes
CPANPLUS-Dist-Build-0.28/MANIFEST
CPANPLUS-Dist-Build-0.28/MANIFEST.SKIP
CPANPLUS-Dist-Build-0.28/META.yml
CPANPLUS-Dist-Build-0.28/README
CPANPLUS-Dist-Build-0.28/LICENSE
CPANPLUS-Dist-Build-0.28/Makefile.PL

  CPAN.pm: Going to build B/BI/BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz

>>> /home/fly818/ap818/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


Writing Makefile for CPANPLUS::Dist::Build
>>> make
cp lib/CPANPLUS/Dist/Build.pm blib/lib/CPANPLUS/Dist/Build.pm
cp lib/CPANPLUS/Dist/Build/Constants.pm blib/lib/CPANPLUS/Dist/Build/Constants.pm
Manifying blib/man3/CPANPLUS::Dist::Build.3
Manifying blib/man3/CPANPLUS::Dist::Build::Constants.3
  BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly818/ap818/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/01_CPANPLUS-Dist-Build-Constants.t .. 
# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1
ok 1 - use CPANPLUS::Dist::Build::Constants;
ok 2 - CPANPLUS::Dist::Build::Constants can BUILD
ok 3 -    BUILD called OK
ok 4 - CPANPLUS::Dist::Build::Constants can BUILD_DIR
ok 5 -    BUILD_DIR called OK
1..5
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/02_CPANPLUS-Dist-Build.t ............ 
# To run tests in verbose mode, set $ENV{PERL5_CPANPLUS_TEST_VERBOSE} = 1
ok 1 - use CPANPLUS::Dist::Build;
ok 2 - Format is available
ok 3 - Module object created for 'noxs'
ok 4 -    Tarball '/home/fly818/var/cpan/build/CPANPLUS-Dist-Build-0.28-Qe6ovY/t/src/noxs/Foo-Bar-0.01.tar.gz' exists
ok 5 -    Preparing module
ok 6 -    Dist registered as status
ok 7 - The object isa CPANPLUS::Dist::Build
ok 8 -    Prepared status registered
ok 9 -    Distdir status registered properly
ok 10 -    Proper installer type found
ok 11 - Creating module
ok 12 -    Created status registered
ok 13 - Installing module
ok 14 -    Status says module installed
ok 15 - Found packlist
ok 16 - Packlist contains entries
ok 17 - Uninstalling module
ok 18 - Module object created for 'xs'
ok 19 -    Tarball '/home/fly818/var/cpan/build/CPANPLUS-Dist-Build-0.28-Qe6ovY/t/src/xs/Foo-Bar-0.01.tar.gz' exists
ok 20 -    Preparing module
ok 21 -    Dist registered as status
ok 22 - The object isa CPANPLUS::Dist::Build
ok 23 -    Prepared status registered
ok 24 -    Distdir status registered properly
ok 25 -    Proper installer type found
ok 26 - Creating module
ok 27 -    Created status registered
ok 28 - Installing module
ok 29 -    Status says module installed
ok 30 - Found packlist
ok 31 - Packlist contains entries
ok 32 - Uninstalling module
ok 33 - Testing ENV settings $dist->prepare
ok 34 -    Files extracted
ok 35 -    File exists
ok 36 -    $mod->prepare failed
ok 37 -    $ENV ENV_CPANPLUS_IS_EXECUTING set correctly during execution
ok 38 -    ENV var now unset
1..38
ok
t/99_pod.t ............................ 
1..2
ok 1 - blib/lib/CPANPLUS/Dist/Build.pm
ok 2 - blib/lib/CPANPLUS/Dist/Build/Constants.pm
ok
t/99_pod_coverage.t ................... 
1..2
ok 1 - Pod coverage on CPANPLUS::Dist::Build
ok 2 - Pod coverage on CPANPLUS::Dist::Build::Constants
ok
All tests successful.
Files=4, Tests=47, 290 wallclock secs ( 0.00 usr  0.05 sys + 11.20 cusr 31.13 csys = 42.38 CPU)
Result: PASS
  BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="CPANPLUS-Dist-Build" VERSION="0.28" DATE="2009-05-08">
  <AUTHOR CPAN="BINGOS">Chris Williams &lt;chris@bingosnet.co.uk></AUTHOR>
  <ABSTRACT>CPANPLUS plugin to install packages that use Build.PL</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.8"/>
  <CODEBASE HREF="CPANPLUS-Dist-Build-0.28.tar.gz"/>
  <PROVIDE NAME="CPANPLUS::Dist::Build" VERSION="0.28"/>
  <PROVIDE NAME="CPANPLUS::Dist::Build::Constants" VERSION="0.28"/>
  <REQUIRE NAME="CPANPLUS::" VERSION="0.84"/>
  <REQUIRE NAME="File::Spec"/>
  <REQUIRE NAME="IPC::Cmd" VERSION="0.42"/>
  <REQUIRE NAME="Locale::Maketext::Simple"/>
  <REQUIRE NAME="Module::Build" VERSION="0.32"/>
  <REQUIRE NAME="Module::Load" VERSION="0.16"/>
  <REQUIRE NAME="Module::Load::Conditional" VERSION="0.30"/>
  <REQUIRE NAME="Module::Pluggable" VERSION="3.8"/>
  <REQUIRE NAME="Params::Check" VERSION="0.26"/>
  <REQUIRE NAME="Test::Harness" VERSION="3.16"/>
  <REQUIRE NAME="Test::More" VERSION="0.47"/>
  <!-- Built 2009-05-09 with ActivePerl-818 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) -->
</SOFTPKG>
>>> (cd /home/fly818/var/cpan/build/CPANPLUS-Dist-Build-0.28-Qe6ovY && tar cvf - CPANPLUS-Dist-Build-0.28.ppd blib) | gzip -c >/home/fly818/var/REPO/B/BI/BINGOS/CPANPLUS-Dist-Build-0.28.tar.gz
CPANPLUS-Dist-Build-0.28.ppd
blib/
blib/lib/
blib/lib/CPANPLUS/
blib/lib/CPANPLUS/Dist/
blib/lib/CPANPLUS/Dist/Build/
blib/lib/CPANPLUS/Dist/Build/Constants.pm
blib/lib/CPANPLUS/Dist/Build.pm
blib/man3/
blib/man3/CPANPLUS::Dist::Build.3
blib/man3/CPANPLUS::Dist::Build::Constants.3
>>> mv /home/fly818/var/cpan/build/CPANPLUS-Dist-Build-0.28-Qe6ovY/CPANPLUS-Dist-Build-0.28.ppd /home/fly818/var/REPO/B/BI/BINGOS
Finished 2009-05-09T16:24:22