Setting PATH to /opt/SUNWspro/bin:/usr/local/bin:/opt/csw/bin:/usr/ccs/bin:/usr/bin:/usr/sbin Start 2009-06-21T12:10:38 ActivePerl-1003 CPAN-1.94 Going to read '/export/home/fly1064/var/cpan/Metadata' Database was generated on Sun, 21 Jun 2009 10:26:54 GMT Running make for K/KI/KITTY/LJ-Schedule-0.6.tar.gz Checksum for /net/nas/data/cpan/authors/id/K/KI/KITTY/LJ-Schedule-0.6.tar.gz ok LJ-Schedule-0.6/ LJ-Schedule-0.6/Changes LJ-Schedule-0.6/lib/ LJ-Schedule-0.6/lib/LJ/ LJ-Schedule-0.6/lib/LJ/Schedule/ LJ-Schedule-0.6/lib/LJ/Schedule/Post/ LJ-Schedule-0.6/lib/LJ/Schedule/Post/Simple.pm LJ-Schedule-0.6/lib/LJ/Schedule/Post.pm LJ-Schedule-0.6/lib/LJ/Schedule/Vcal.pm LJ-Schedule-0.6/lib/LJ/Schedule.pm LJ-Schedule-0.6/Makefile.PL LJ-Schedule-0.6/MANIFEST LJ-Schedule-0.6/META.yml LJ-Schedule-0.6/README LJ-Schedule-0.6/t/ LJ-Schedule-0.6/t/00-load.t LJ-Schedule-0.6/t/01schedule.t LJ-Schedule-0.6/t/02vcal.t LJ-Schedule-0.6/t/boilerplate.t LJ-Schedule-0.6/t/pod-coverage.t LJ-Schedule-0.6/t/pod.t LJ-Schedule-0.6/t/test1.ini LJ-Schedule-0.6/t/test2.vcal LJ-Schedule-0.6/t/test2.vcal.dst LJ-Schedule-0.6/t/test2.vcal.ics CPAN.pm: Going to build K/KI/KITTY/LJ-Schedule-0.6.tar.gz >>> /export/home/fly1064/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for LJ::Schedule >>> make cp lib/LJ/Schedule.pm blib/lib/LJ/Schedule.pm cp lib/LJ/Schedule/Post.pm blib/lib/LJ/Schedule/Post.pm cp lib/LJ/Schedule/Vcal.pm blib/lib/LJ/Schedule/Vcal.pm cp lib/LJ/Schedule/Post/Simple.pm blib/lib/LJ/Schedule/Post/Simple.pm Manifying blib/man3/LJ::Schedule.3 Manifying blib/man3/LJ::Schedule::Post.3 Manifying blib/man3/LJ::Schedule::Post::Simple.3 Manifying blib/man3/LJ::Schedule::Vcal.3 KITTY/LJ-Schedule-0.6.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /export/home/fly1064/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use LJ::Schedule;' # at t/00-load.t line 6. # Tried to use 'LJ::Schedule'. # Error: Can't locate Data/Ical.pm in @INC (@INC contains: /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/arch /export/home/fly1064/var/megalib /export/home/fly1064/ap1003/site/lib /export/home/fly1064/ap1003/lib) at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # Compilation failed in require at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule.pm line 118. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule.pm line 118. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. # Failed test 'use LJ::Schedule::Vcal;' # at t/00-load.t line 7. # Tried to use 'LJ::Schedule::Vcal'. # Error: Attempt to reload LJ/Schedule/Vcal.pm aborted. # Compilation failed in require at (eval 6) line 2. # BEGIN failed--compilation aborted at (eval 6) line 2. Use of uninitialized value $LJ::Schedule::VERSION in concatenation (.) or string at t/00-load.t line 12. # Testing LJ::Schedule , Perl 5.010000, /export/home/fly1064/bin/perl # Looks like you failed 2 tests of 4. t/00-load.t ....... 1..4 not ok 1 - use LJ::Schedule; not ok 2 - use LJ::Schedule::Vcal; ok 3 - use LJ::Schedule::Post; ok 4 - use LJ::Schedule::Post::Simple; Dubious, test returned 2 (wstat 512, 0x200) Failed 2/4 subtests # Failed test 'use LJ::Schedule;' # at t/01schedule.t line 6. # Tried to use 'LJ::Schedule'. # Error: Can't locate Data/Ical.pm in @INC (@INC contains: /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/arch /export/home/fly1064/var/megalib /export/home/fly1064/ap1003/site/lib /export/home/fly1064/ap1003/lib) at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # Compilation failed in require at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule.pm line 118. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule.pm line 118. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9. # Looks like you planned 7 tests but ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test exited with 255 just after 1. t/01schedule.t .... 1..7 not ok 1 - use LJ::Schedule; Dubious, test returned 255 (wstat 65280, 0xff00) Failed 7/7 subtests # Failed test 'use LJ::Schedule::Vcal;' # at t/02vcal.t line 8. # Tried to use 'LJ::Schedule::Vcal'. # Error: Can't locate Data/Ical.pm in @INC (@INC contains: /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/arch /export/home/fly1064/var/megalib /export/home/fly1064/ap1003/site/lib /export/home/fly1064/ap1003/lib) at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/LJ-Schedule-0.6-jnYmWp/blib/lib/LJ/Schedule/Vcal.pm line 8. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Can't locate object method "new" via package "LJ::Schedule::Vcal" at t/02vcal.t line 15. # Looks like you planned 2 tests but ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test exited with 255 just after 1. t/02vcal.t ........ 1..2 not ok 1 - use LJ::Schedule::Vcal; Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests t/boilerplate.t ... 1..6 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text ok 3 - lib/LJ/Schedule.pm contains no boilerplate text ok 4 - lib/LJ/Schedule/Vcal.pm contains no boilerplate text ok 5 - lib/LJ/Schedule/Post.pm contains no boilerplate text ok 6 - lib/LJ/Schedule/Post/Simple.pm contains no boilerplate text ok # Failed test 'Pod coverage on LJ::Schedule::Post' # at /export/home/fly1064/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for LJ::Schedule::Post is 0.0%, with 5 naked subroutines: # do_summary_aliasing # lj_add_event # lj_add_week_break # new # output_cal_for_lj # Failed test 'Pod coverage on LJ::Schedule::Post::Simple' # at /export/home/fly1064/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for LJ::Schedule::Post::Simple is 0.0%, with 2 naked subroutines: # new # post_cal # Looks like you failed 2 tests of 4. t/pod-coverage.t .. 1..4 ok 1 - Pod coverage on LJ::Schedule not ok 2 - Pod coverage on LJ::Schedule::Post ok 3 - Pod coverage on LJ::Schedule::Vcal not ok 4 - Pod coverage on LJ::Schedule::Post::Simple Dubious, test returned 2 (wstat 512, 0x200) Failed 2/4 subtests t/pod.t ........... 1..4 ok 1 - blib/lib/LJ/Schedule.pm ok 2 - blib/lib/LJ/Schedule/Post.pm ok 3 - blib/lib/LJ/Schedule/Vcal.pm ok 4 - blib/lib/LJ/Schedule/Post/Simple.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 512 Tests: 4 Failed: 2) Failed tests: 1-2 Non-zero exit status: 2 t/01schedule.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 7 tests but ran 1. t/02vcal.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 1. t/pod-coverage.t (Wstat: 512 Tests: 4 Failed: 2) Failed tests: 2, 4 Non-zero exit status: 2 Files=6, Tests=20, 2 wallclock secs ( 0.15 usr 0.06 sys + 1.62 cusr 0.21 csys = 2.04 CPU) Result: FAIL Failed 4/6 test programs. 6/20 subtests failed. make: *** [test_dynamic] Error 255 KITTY/LJ-Schedule-0.6.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KITTY/LJ-Schedule-0.6.tar.gz Finished 2009-06-21T12:10:48