Start 2009-01-15T02:19:38 Going to read /export/home/fly1064/var/cpan/Metadata Database was generated on Tue, 13 Jan 2009 09:27:58 GMT Running make for V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz ok ZConf-Cron-0.0.0/ ZConf-Cron-0.0.0/t/ ZConf-Cron-0.0.0/lib/ ZConf-Cron-0.0.0/bin/ ZConf-Cron-0.0.0/Changes ZConf-Cron-0.0.0/README ZConf-Cron-0.0.0/MANIFEST ZConf-Cron-0.0.0/Makefile.PL ZConf-Cron-0.0.0/.cvsignore ZConf-Cron-0.0.0/bin/zccron ZConf-Cron-0.0.0/bin/zccrontab ZConf-Cron-0.0.0/bin/.exists ZConf-Cron-0.0.0/lib/ZConf/ ZConf-Cron-0.0.0/lib/ZConf/Cron.pm ZConf-Cron-0.0.0/t/pod.t ZConf-Cron-0.0.0/t/boilerplate.t ZConf-Cron-0.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz >>> /export/home/fly1064/bin/perl Makefile.PL Checking if your kit is complete... Looks good Warning: prerequisite ZConf 0 not found. Writing Makefile for ZConf::Cron ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-Cron-0.0.0.tar.gz ---- ZConf [requires] Running make test Delayed until after prerequisites Running test for module 'ZConf' Running make for V/VV/VVELOX/ZConf-0.7.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-0.7.0.tar.gz ok ZConf-0.7.0/ ZConf-0.7.0/bin/ ZConf-0.7.0/lib/ ZConf-0.7.0/t/ ZConf-0.7.0/.cvsignore ZConf-0.7.0/Changes ZConf-0.7.0/MANIFEST ZConf-0.7.0/Makefile.PL ZConf-0.7.0/README ZConf-0.7.0/TODO ZConf-0.7.0/t/boilerplate.t ZConf-0.7.0/t/pod.t ZConf-0.7.0/t/pod-coverage.t ZConf-0.7.0/t/00-load.t ZConf-0.7.0/lib/ZConf.pm ZConf-0.7.0/bin/zccreate ZConf-0.7.0/bin/zcget ZConf-0.7.0/bin/zcls ZConf-0.7.0/bin/zcrm ZConf-0.7.0/bin/zcset ZConf-0.7.0/bin/zcvdel ZConf-0.7.0/bin/zcvls ZConf-0.7.0/bin/.exists CPAN.pm: Going to build V/VV/VVELOX/ZConf-0.7.0.tar.gz >>> /export/home/fly1064/bin/perl Makefile.PL Warning: prerequisite Net::LDAP::Makepath 0 not found. Checking if your kit is complete... Looks good Writing Makefile for ZConf ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-0.7.0.tar.gz ---- Net::LDAP::Makepath [requires] Running make test Delayed until after prerequisites Running test for module 'Net::LDAP::Makepath' Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz ok Net-LDAP-Makepath-1.0.0/ Net-LDAP-Makepath-1.0.0/t/ Net-LDAP-Makepath-1.0.0/lib/ Net-LDAP-Makepath-1.0.0/Changes Net-LDAP-Makepath-1.0.0/README Net-LDAP-Makepath-1.0.0/MANIFEST Net-LDAP-Makepath-1.0.0/.cvsignore Net-LDAP-Makepath-1.0.0/Makefile.PL Net-LDAP-Makepath-1.0.0/lib/Net/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/Makepath.pm Net-LDAP-Makepath-1.0.0/t/pod-coverage.t Net-LDAP-Makepath-1.0.0/t/pod.t Net-LDAP-Makepath-1.0.0/t/boilerplate.t Net-LDAP-Makepath-1.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz >>> /export/home/fly1064/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Net::LDAP::Makepath >>> make cp lib/Net/LDAP/Makepath.pm blib/lib/Net/LDAP/Makepath.pm Manifying blib/man3/Net::LDAP::Makepath.3 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /export/home/fly1064/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 ok 1 - use Net::LDAP::Makepath; # Testing Net::LDAP::Makepath 1.0.0, Perl 5.010000, /export/home/fly1064/bin/perl ok t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.... 1..1 not ok 1 - Pod coverage on Net::LDAP::Makepath # Failed test 'Pod coverage on Net::LDAP::Makepath' # at /export/home/fly1064/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for Net::LDAP::Makepath is 0.0%, with 1 naked subroutine: # LDAPmakepathSimple # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod............. 1..1 ok 1 - blib/lib/Net/LDAP/Makepath.pm ok Test Summary Report ------------------- t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 t/pod-coverage (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 2 wallclock secs ( 0.10 usr 0.06 sys + 1.26 cusr 0.13 csys = 1.55 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Running make for V/VV/VVELOX/ZConf-0.7.0.tar.gz Has already been unwrapped into directory /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY CPAN.pm: Going to build V/VV/VVELOX/ZConf-0.7.0.tar.gz Warning: Prerequisite 'Net::LDAP::Makepath => 0' for 'VVELOX/ZConf-0.7.0.tar.gz' failed when processing 'VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf.pm blib/lib/ZConf.pm Manifying blib/man3/ZConf.3 VVELOX/ZConf-0.7.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /export/home/fly1064/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 not ok 1 - use ZConf; # Failed test 'use ZConf;' # at t/00-load.t line 6. # Tried to use 'ZConf'. # Error: Can't locate Net/LDAP/Makepath.pm in @INC (@INC contains: /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/lib /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/arch /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/lib /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/arch /export/home/fly1064/var/megalib /export/home/fly1064/ap1003/site/lib /export/home/fly1064/ap1003/lib) at /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/lib/ZConf.pm line 6, line 275. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/ZConf-0.7.0-LnQ7kY/blib/lib/ZConf.pm line 6, line 275. # Compilation failed in require at (eval 3) line 2, line 275. # BEGIN failed--compilation aborted at (eval 3) line 2, line 275. Use of uninitialized value $ZConf::VERSION in concatenation (.) or string at t/00-load.t line 9, line 275. # Testing ZConf , Perl 5.010000, /export/home/fly1064/bin/perl # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.... 1..1 ok 1 - Pod coverage on ZConf ok t/pod............. 1..1 ok 1 - blib/lib/ZConf.pm ok Test Summary Report ------------------- t/00-load (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 3 wallclock secs ( 0.10 usr 0.06 sys + 2.01 cusr 0.13 csys = 2.30 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-0.7.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-0.7.0.tar.gz Running make for V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Has already been unwrapped into directory /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Warning: Prerequisite 'ZConf => 0' for 'VVELOX/ZConf-Cron-0.0.0.tar.gz' failed when processing 'VVELOX/ZConf-0.7.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf/Cron.pm blib/lib/ZConf/Cron.pm Manifying blib/man3/ZConf::Cron.3 VVELOX/ZConf-Cron-0.0.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /export/home/fly1064/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load........ 1..1 not ok 1 - use ZConf::Cron; # Failed test 'use ZConf::Cron;' # at t/00-load.t line 6. # Tried to use 'ZConf::Cron'. # Error: Can't locate ZConf.pm in @INC (@INC contains: /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/lib /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/arch /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/lib /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/arch /export/home/fly1064/var/megalib /export/home/fly1064/ap1003/site/lib /export/home/fly1064/ap1003/lib) at /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/lib/ZConf/Cron.pm line 3. # BEGIN failed--compilation aborted at /export/home/fly1064/var/cpan/build/ZConf-Cron-0.0.0-olsHuG/blib/lib/ZConf/Cron.pm line 3. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value $ZConf::Cron::VERSION in concatenation (.) or string at t/00-load.t line 9. # Testing ZConf::Cron , Perl 5.010000, /export/home/fly1064/bin/perl # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf/Cron.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod............ 1..1 ok 1 - blib/lib/ZConf/Cron.pm ok Test Summary Report ------------------- t/00-load (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=3, Tests=5, 1 wallclock secs ( 0.12 usr 0.03 sys + 0.48 cusr 0.08 csys = 0.71 CPU) Result: FAIL Failed 1/3 test programs. 1/5 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-Cron-0.0.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-Cron-0.0.0.tar.gz Finished 2009-01-15T02:20:02