Setting PATH to /opt/SUNWspro/bin:/usr/local/bin:/opt/csw/bin:/usr/ccs/bin:/usr/bin:/usr/sbin
Start 2010-06-08T21:56:46
ActivePerl-1200 CPAN-1.9402
Going to read '/export/home/fly1264/var/cpan/Metadata'
  Database was generated on Tue, 08 Jun 2010 21:27:09 GMT
Running make for S/SH/SHLOMIF/IO-Socket-INET6-2.64.tar.gz
Checksum for /net/nas/data/cpan/authors/id/S/SH/SHLOMIF/IO-Socket-INET6-2.64.tar.gz ok
IO-Socket-INET6-2.64
IO-Socket-INET6-2.64/MANIFEST
IO-Socket-INET6-2.64/META.yml
IO-Socket-INET6-2.64/ChangeLog
IO-Socket-INET6-2.64/README
IO-Socket-INET6-2.64/Makefile.PL
IO-Socket-INET6-2.64/Build.PL
IO-Socket-INET6-2.64/t
IO-Socket-INET6-2.64/t/io_multihomed6.t
IO-Socket-INET6-2.64/t/host6.t
IO-Socket-INET6-2.64/t/configure6.t
IO-Socket-INET6-2.64/t/io_udp6.t
IO-Socket-INET6-2.64/t/io_sock6.t
IO-Socket-INET6-2.64/t/blocking.t
IO-Socket-INET6-2.64/t/listen_port_only.t
IO-Socket-INET6-2.64/t/pod-coverage.t
IO-Socket-INET6-2.64/t/pod.t
IO-Socket-INET6-2.64/lib
IO-Socket-INET6-2.64/lib/IO
IO-Socket-INET6-2.64/lib/IO/Socket
IO-Socket-INET6-2.64/lib/IO/Socket/INET6.pm
IO-Socket-INET6-2.64/inc
IO-Socket-INET6-2.64/inc/Test
IO-Socket-INET6-2.64/inc/Test/Run
IO-Socket-INET6-2.64/inc/Test/Run/Builder.pm

  CPAN.pm: Going to build S/SH/SHLOMIF/IO-Socket-INET6-2.64.tar.gz

>>> /export/home/fly1264/bin/perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for IO::Socket::INET6
>>> make
cp lib/IO/Socket/INET6.pm blib/lib/IO/Socket/INET6.pm
Manifying blib/man3/IO::Socket::INET6.3
  SHLOMIF/IO-Socket-INET6-2.64.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /export/home/fly1264/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/blocking.t .......... 
1..2
ok 1 - Non-blocking works on listeners
ok 2 - Non-blocking works on outbound connections
ok
t/configure6.t ........ 
1..1
ok 1 - Testing that "sub configure" does not fail
ok
t/host6.t ............. 
1..4
ok 1 - Checking for sockhost() success
ok 2 - Checking for peerhost() success
ok 3 - Checking for sockflow() success
ok 4 - Checking for peerflow() success
ok
t/io_multihomed6.t .... 
1..8
ok 1
ok 2 # inet6
ok 4
ok 3
ok 5 # inet
ok 6
ok 7
ok 8
All 8 subtests passed 
t/io_sock6.t .......... 
1..20
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok
t/io_udp6.t ........... 
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/listen_port_only.t .. 
1..1
ok 1 - Client was initialised - connected.
ok
t/pod-coverage.t ...... 
1..1
ok 1 - Pod coverage on IO::Socket::INET6
ok
t/pod.t ............... 
1..1
ok 1 - POD test for blib/lib/IO/Socket/INET6.pm
ok

Test Summary Report
-------------------
t/io_multihomed6.t  (Wstat: 0 Tests: 8 Failed: 0)
  Parse errors: Tests out of sequence.  Found (4) but expected (3)
                Tests out of sequence.  Found (3) but expected (4)
Files=9, Tests=45, 23 wallclock secs ( 0.17 usr  0.09 sys +  2.33 cusr  0.45 csys =  3.04 CPU)
Result: FAIL
Failed 1/9 test programs. 0/45 subtests failed.
make: *** [test_dynamic] Error 255
  SHLOMIF/IO-Socket-INET6-2.64.tar.gz
  make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports SHLOMIF/IO-Socket-INET6-2.64.tar.gz
Finished 2010-06-08T21:57:31