PATH=/opt/SUNWspro/bin:/usr/local/bin:/opt/csw/bin:/usr/ccs/bin:/usr/bin:/usr/sbin Start 2015-01-03T14:14:51 ActivePerl-1200 CPAN-2.00 Reading '/export/home/fly1264/var/cpan/Metadata' Database was generated on Sat, 03 Jan 2015 21:17:02 GMT Running make for T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz Fetching with LWP: http://cpan.nas1.activestate.com/authors/id/T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz Checksum for /export/home/fly1264/var/cpan/sources/authors/id/T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz ok Device-PCD8544-0.0268329147520525/ Device-PCD8544-0.0268329147520525/MANIFEST Device-PCD8544-0.0268329147520525/lib/ Device-PCD8544-0.0268329147520525/lib/Device/ Device-PCD8544-0.0268329147520525/lib/Device/PCD8544.pm Device-PCD8544-0.0268329147520525/lib/Device/PCD8544/ Device-PCD8544-0.0268329147520525/lib/Device/PCD8544/ConvertImage.pm Device-PCD8544-0.0268329147520525/lib/Device/PCD8544/Exceptions.pm Device-PCD8544-0.0268329147520525/examples/ Device-PCD8544-0.0268329147520525/examples/rpi.pl Device-PCD8544-0.0268329147520525/examples/raw_example.pl Device-PCD8544-0.0268329147520525/META.json Device-PCD8544-0.0268329147520525/LICENSE Device-PCD8544-0.0268329147520525/t_data/ Device-PCD8544-0.0268329147520525/t_data/oversized_sudo_make_me_a_sandwich.bmp Device-PCD8544-0.0268329147520525/t_data/oversized_sudo_make_me_a_sandwich.png Device-PCD8544-0.0268329147520525/t_data/sudo_make_me_a_sandwich.bmp Device-PCD8544-0.0268329147520525/README Device-PCD8544-0.0268329147520525/Makefile.PL Device-PCD8544-0.0268329147520525/dist.ini Device-PCD8544-0.0268329147520525/t/ Device-PCD8544-0.0268329147520525/t/lib/ Device-PCD8544-0.0268329147520525/t/lib/MockWebIO.pm Device-PCD8544-0.0268329147520525/t/001_load.t Device-PCD8544-0.0268329147520525/t/020_lcd.t Device-PCD8544-0.0268329147520525/t/010_convert_bmp.t Device-PCD8544-0.0268329147520525/t/002_pod.t CPAN.pm: Building T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz >>> /export/home/fly1264/bin/perl Makefile.PL Warning: prerequisite Device::WebIO 0.009 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Device::PCD8544 Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz ---- Device::WebIO [requires] Running make test Delayed until after prerequisites Running test for module 'Device::WebIO' Running make for T/TM/TMURRAY/Device-WebIO-0.009.tar.gz Checksum for /export/home/fly1264/var/cpan/sources/authors/id/T/TM/TMURRAY/Device-WebIO-0.009.tar.gz ok Device-WebIO-0.009/ Device-WebIO-0.009/MANIFEST Device-WebIO-0.009/lib/ Device-WebIO-0.009/lib/Device/ Device-WebIO-0.009/lib/Device/WebIO.pm Device-WebIO-0.009/lib/Device/WebIO/ Device-WebIO-0.009/lib/Device/WebIO/Device.pm Device-WebIO-0.009/lib/Device/WebIO/Device/ Device-WebIO-0.009/lib/Device/WebIO/Device/PWM.pm Device-WebIO-0.009/lib/Device/WebIO/Device/VideoOutput.pm Device-WebIO-0.009/lib/Device/WebIO/Device/I2CUser.pm Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalInputCallback.pm Device-WebIO-0.009/lib/Device/WebIO/Device/OneWire.pm Device-WebIO-0.009/lib/Device/WebIO/Device/Serial.pm Device-WebIO-0.009/lib/Device/WebIO/Device/I2CProvider.pm Device-WebIO-0.009/lib/Device/WebIO/Device/StillImageOutput.pm Device-WebIO-0.009/lib/Device/WebIO/Device/SPI.pm Device-WebIO-0.009/lib/Device/WebIO/Device/VideoOutputCallback.pm Device-WebIO-0.009/lib/Device/WebIO/Device/TempSensor.pm Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalInput.pm Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalOutput.pm Device-WebIO-0.009/lib/Device/WebIO/Device/ADC.pm Device-WebIO-0.009/lib/Device/WebIO/Exceptions.pm Device-WebIO-0.009/examples/ Device-WebIO-0.009/examples/rpi_firmata_link_blink.pl Device-WebIO-0.009/META.json Device-WebIO-0.009/LICENSE Device-WebIO-0.009/t_data/ Device-WebIO-0.009/t_data/test.jpg Device-WebIO-0.009/t_data/wumpus_video_dump.h264 Device-WebIO-0.009/TODO Device-WebIO-0.009/README Device-WebIO-0.009/CHANGELOG Device-WebIO-0.009/Makefile.PL Device-WebIO-0.009/dist.ini Device-WebIO-0.009/t/ Device-WebIO-0.009/t/030_adc_input.t Device-WebIO-0.009/t/lib/ Device-WebIO-0.009/t/lib/MockVideoOutput.pm Device-WebIO-0.009/t/lib/MockDigitalInputCallback.pm Device-WebIO-0.009/t/lib/MockADCInput.pm Device-WebIO-0.009/t/lib/MockPWMOutput.pm Device-WebIO-0.009/t/lib/MockDigitalInput.pm Device-WebIO-0.009/t/lib/MockTempSensor.pm Device-WebIO-0.009/t/lib/MockDigitalInputOutput.pm Device-WebIO-0.009/t/lib/MockDigitalOutput.pm Device-WebIO-0.009/t/lib/MockVideoOutputCallback.pm Device-WebIO-0.009/t/lib/MockStillImageOutput.pm Device-WebIO-0.009/t/lib/MockI2CUser.pm Device-WebIO-0.009/t/lib/MockI2CProvider.pm Device-WebIO-0.009/t/lib/MockSPI.pm Device-WebIO-0.009/t/100_temp_sensors.t Device-WebIO-0.009/t/080_still_image_output.t Device-WebIO-0.009/t/040_pwm_output.t Device-WebIO-0.009/t/010_digital_input.t Device-WebIO-0.009/t/110_digital_input_callback.t Device-WebIO-0.009/t/060_video_output.t Device-WebIO-0.009/t/001_load.t Device-WebIO-0.009/t/090_i2c.t Device-WebIO-0.009/t/130_spi.t Device-WebIO-0.009/t/200_two_types_one_obj.t Device-WebIO-0.009/t/120_video_output_callback.t Device-WebIO-0.009/t/070_description.t Device-WebIO-0.009/t/020_digital_output.t Device-WebIO-0.009/t/002_pod.t CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-0.009.tar.gz >>> /export/home/fly1264/bin/perl Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Device::WebIO Writing MYMETA.yml and MYMETA.json >>> make cp lib/Device/WebIO/Device/PWM.pm blib/lib/Device/WebIO/Device/PWM.pm cp lib/Device/WebIO/Device.pm blib/lib/Device/WebIO/Device.pm cp lib/Device/WebIO/Device/VideoOutput.pm blib/lib/Device/WebIO/Device/VideoOutput.pm cp lib/Device/WebIO/Device/DigitalInput.pm blib/lib/Device/WebIO/Device/DigitalInput.pm cp lib/Device/WebIO/Device/DigitalOutput.pm blib/lib/Device/WebIO/Device/DigitalOutput.pm cp lib/Device/WebIO.pm blib/lib/Device/WebIO.pm cp lib/Device/WebIO/Device/DigitalInputCallback.pm blib/lib/Device/WebIO/Device/DigitalInputCallback.pm cp lib/Device/WebIO/Device/ADC.pm blib/lib/Device/WebIO/Device/ADC.pm cp lib/Device/WebIO/Device/I2CProvider.pm blib/lib/Device/WebIO/Device/I2CProvider.pm cp lib/Device/WebIO/Device/StillImageOutput.pm blib/lib/Device/WebIO/Device/StillImageOutput.pm cp lib/Device/WebIO/Device/VideoOutputCallback.pm blib/lib/Device/WebIO/Device/VideoOutputCallback.pm cp lib/Device/WebIO/Exceptions.pm blib/lib/Device/WebIO/Exceptions.pm cp lib/Device/WebIO/Device/OneWire.pm blib/lib/Device/WebIO/Device/OneWire.pm cp lib/Device/WebIO/Device/Serial.pm blib/lib/Device/WebIO/Device/Serial.pm cp lib/Device/WebIO/Device/TempSensor.pm blib/lib/Device/WebIO/Device/TempSensor.pm cp lib/Device/WebIO/Device/I2CUser.pm blib/lib/Device/WebIO/Device/I2CUser.pm cp lib/Device/WebIO/Device/SPI.pm blib/lib/Device/WebIO/Device/SPI.pm Manifying 13 pod documents TMURRAY/Device-WebIO-0.009.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1264/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/001_load.t .................... 1..14 ok 1 - use Device::WebIO::Exceptions; ok 2 - use Device::WebIO; ok 3 - use Device::WebIO::Device; ok 4 - use Device::WebIO::Device::DigitalInput; ok 5 - use Device::WebIO::Device::DigitalOutput; ok 6 - use Device::WebIO::Device::DigitalInputCallback; ok 7 - use Device::WebIO::Device::ADC; ok 8 - use Device::WebIO::Device::PWM; ok 9 - use Device::WebIO::Device::SPI; ok 10 - use Device::WebIO::Device::I2CProvider; ok 11 - use Device::WebIO::Device::I2CUser; ok 12 - use Device::WebIO::Device::Serial; ok 13 - use Device::WebIO::Device::OneWire; ok 14 - use Device::WebIO::Device::VideoOutput; ok t/002_pod.t ..................... 1..17 ok 1 - POD test for lib/Device/WebIO.pm ok 2 - POD test for lib/Device/WebIO/Device.pm ok 3 - POD test for lib/Device/WebIO/Exceptions.pm (no pod) ok 4 - POD test for lib/Device/WebIO/Device/PWM.pm (no pod) ok 5 - POD test for lib/Device/WebIO/Device/VideoOutput.pm ok 6 - POD test for lib/Device/WebIO/Device/I2CUser.pm ok 7 - POD test for lib/Device/WebIO/Device/DigitalInputCallback.pm ok 8 - POD test for lib/Device/WebIO/Device/OneWire.pm (no pod) ok 9 - POD test for lib/Device/WebIO/Device/Serial.pm (no pod) ok 10 - POD test for lib/Device/WebIO/Device/I2CProvider.pm ok 11 - POD test for lib/Device/WebIO/Device/StillImageOutput.pm ok 12 - POD test for lib/Device/WebIO/Device/SPI.pm ok 13 - POD test for lib/Device/WebIO/Device/VideoOutputCallback.pm ok 14 - POD test for lib/Device/WebIO/Device/TempSensor.pm ok 15 - POD test for lib/Device/WebIO/Device/DigitalInput.pm ok 16 - POD test for lib/Device/WebIO/Device/DigitalOutput.pm ok 17 - POD test for lib/Device/WebIO/Device/ADC.pm ok t/010_digital_input.t ........... 1..12 ok 1 - Does Device role ok 2 - Does DigitalInput role ok 3 - Pin 0 set as input ok 4 - Pin 1 set as input ok 5 - Pin 2 not set as input ok 6 - Input 0 on pin 0 ok 7 - Input 1 on pin 1 ok 8 - Fetch pin count ok 9 - Read whole port ok 10 - Caught exception for using too high a pin for set_as_input() ok 11 - Caught exception for using too high a pin for digital_input() ok 12 - Caught exception for using an output function on an input-only object ok t/020_digital_output.t .......... 1..13 ok 1 - Does Device role ok 2 - Does DigitalOutput role ok 3 - Pin 0 set as output ok 4 - Pin 1 set as output ok 5 - Pin 2 not set as output ok 6 - Output 0 on pin 0 ok 7 - Output 1 on pin 1 ok 8 - Fetch pin count ok 9 - Port write pin 0 ok 10 - Port write pin 5 ok 11 - Caught exception for using too high a pin on set_as_output() ok 12 - Caught exception for using too high a pin on digital_output() ok 13 - Caught exception for using an input function on an output-only object ok t/030_adc_input.t ............... 1..20 ok 1 - Does Device role ok 2 - Does ADC role ok 3 - Pin count ok 4 - Bit resolution pin 0 ok 5 - Max int pin 0 ok 6 - Volt reference pin 0 ok 7 - Bit resolution pin 2 ok 8 - Max int pin 2 ok 9 - Volt reference pin 2 ok 10 - ADC pin 0 set ok 11 - ADC pin 1 set ok 12 - ADC pin 2 set ok 13 - ADC pin 0 float ok 14 - ADC pin 2 float ok 15 - ADC pin 0 volts ok 16 - ADC pin 2 volts ok 17 - Caught exception for using too high a pin for adc_input_int() ok 18 - Caught exception for using too high a pin for adc_input_float() ok 19 - Caught exception for using too high a pin for adc_input_volts() ok 20 - Caught exception for using a digital output function on an adc-only object ok t/040_pwm_output.t .............. 1..13 ok 1 - Does Device role ok 2 - Does PWM role ok 3 - Pin count ok 4 - Bit resolution pin 0 ok 5 - Max int pin 0 ok 6 - Bit resolution pin 0 ok 7 - Max int pin 0 ok 8 - PWM pin 0 set ok 9 - PWM pin 1 set ok 10 - PWM pin 2 set ok 11 - Caught exception for using too high a pin for pwm_output_int() ok 12 - Caught exception for using too high a pin for pwm_output_float() ok 13 - Caught exception for using a digital output function on a pwm-only object ok t/060_video_output.t ............ 1..13 ok 1 - Does Device role ok 2 - Does VideoOutput role ok 3 - Channel count ok 4 - Width ok 5 - Height ok 6 - FPS ok 7 - Kbps ok 8 - Width ok 9 - Height ok 10 - FPS ok 11 - Kbps ok 12 - Content-type video/h264 is allowed ok 13 - Got video stream ok Perl v5.14.0 required--this is only v5.12.0, stopped at t/070_description.t line 25. BEGIN failed--compilation aborted at t/070_description.t line 25. # Looks like your test exited with 255 before it could output anything. t/070_description.t ............. 1..3 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 3/3 subtests t/080_still_image_output.t ...... 1..9 ok 1 - Channel count ok 2 - Width ok 3 - Height ok 4 - Quality ok 5 - Width ok 6 - Height ok 7 - Quality ok 8 - Content-type image/jpeg is allowed ok 9 - Got video stream ok Perl v5.14.0 required--this is only v5.12.0, stopped at t/090_i2c.t line 25. BEGIN failed--compilation aborted at t/090_i2c.t line 25. # Looks like your test exited with 255 before it could output anything. t/090_i2c.t ..................... 1..2 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests Perl v5.14.0 required--this is only v5.12.0, stopped at t/100_temp_sensors.t line 25. BEGIN failed--compilation aborted at t/100_temp_sensors.t line 25. # Looks like your test exited with 255 before it could output anything. t/100_temp_sensors.t ............ 1..6 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/6 subtests t/110_digital_input_callback.t .. 1..16 ok 1 - Does Device role ok 2 - Does DigitalInputCallback role ok 3 - Pin 0 set as input ok 4 - Pin 1 set as input ok 5 - Pin 2 set as input ok 6 - Pin 3 set as input ok 7 - Fetch pin count ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 - Began loop ok t/120_video_output_callback.t ... 1..5 ok 1 - Does Device role ok 2 - Does VideoOutput role ok 3 - Does VideoOutputCallback role ok 4 - Called callback ok 5 - Begin loop ok Perl v5.14.0 required--this is only v5.12.0, stopped at t/130_spi.t line 25. BEGIN failed--compilation aborted at t/130_spi.t line 25. # Looks like your test exited with 255 before it could output anything. t/130_spi.t ..................... 1..3 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 3/3 subtests t/200_two_types_one_obj.t ....... 1..12 ok 1 - Does DigitalInput role ok 2 - Does DigitalOutput role ok 3 - Input pin count ok 4 - Output pin count ok 5 - Pin 0 set as input ok 6 - Pin 1 set as output ok 7 - Input 1 on pin 0 ok 8 - Output 1 on pin 1 ok 9 - Read whole port ok 10 - Port write pin 0 ok 11 - Port write pin 5 ok 12 - Caught exception for using too high a pin on set_as_output() ok Test Summary Report ------------------- t/070_description.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 3 tests but ran 0. t/090_i2c.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 0. t/100_temp_sensors.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 0. t/130_spi.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 3 tests but ran 0. Files=15, Tests=144, 6 wallclock secs ( 0.26 usr 0.20 sys + 5.02 cusr 0.70 csys = 6.18 CPU) Result: FAIL Failed 4/15 test programs. 0/144 subtests failed. make: *** [test_dynamic] Error 255 TMURRAY/Device-WebIO-0.009.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports TMURRAY/Device-WebIO-0.009.tar.gz Running make for T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz Has already been unwrapped into directory /export/home/fly1264/var/cpan/build/Device-PCD8544-0.0268329147520525-MImkIJ CPAN.pm: Building T/TM/TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz Warning: Prerequisite 'Device::WebIO => 0.009' for 'TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz' failed when processing 'TMURRAY/Device-WebIO-0.009.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Device/PCD8544.pm blib/lib/Device/PCD8544.pm cp lib/Device/PCD8544/ConvertImage.pm blib/lib/Device/PCD8544/ConvertImage.pm cp lib/Device/PCD8544/Exceptions.pm blib/lib/Device/PCD8544/Exceptions.pm Manifying 3 pod documents TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1264/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Perl v5.14.0 required--this is only v5.12.0, stopped at t/001_load.t line 25. BEGIN failed--compilation aborted at t/001_load.t line 25. # Looks like your test exited with 255 before it could output anything. t/001_load.t ......... 1..3 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 3/3 subtests t/002_pod.t .......... 1..3 ok 1 - POD test for lib/Device/PCD8544.pm ok 2 - POD test for lib/Device/PCD8544/ConvertImage.pm ok 3 - POD test for lib/Device/PCD8544/Exceptions.pm ok Perl v5.14.0 required--this is only v5.12.0, stopped at t/010_convert_bmp.t line 25. BEGIN failed--compilation aborted at t/010_convert_bmp.t line 25. t/010_convert_bmp.t .. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Perl v5.14.0 required--this is only v5.12.0, stopped at t/020_lcd.t line 25. BEGIN failed--compilation aborted at t/020_lcd.t line 25. # Looks like your test exited with 255 before it could output anything. t/020_lcd.t .......... 1..13 Dubious, test returned 255 (wstat 65280, 0xff00) Failed 13/13 subtests Test Summary Report ------------------- t/001_load.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 3 tests but ran 0. t/010_convert_bmp.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/020_lcd.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 13 tests but ran 0. Files=4, Tests=3, 1 wallclock secs ( 0.10 usr 0.07 sys + 0.62 cusr 0.11 csys = 0.90 CPU) Result: FAIL Failed 3/4 test programs. 0/3 subtests failed. make: *** [test_dynamic] Error 255 TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz one dependency not OK (Device::WebIO); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports TMURRAY/Device-PCD8544-0.0268329147520525.tar.gz Finished 2015-01-03T14:15:17