Start 2008-10-11T18:58:23
Going to read /export/home/fly1003/var/cpan/Metadata
  Database was generated on Sat, 11 Oct 2008 08:27:49 GMT
Running make for S/SA/SALVA/mcoder-0.10.tar.gz
Checksum for /net/nas/data/cpan/authors/id/S/SA/SALVA/mcoder-0.10.tar.gz ok
mcoder-0.10/
mcoder-0.10/t/
mcoder-0.10/t/2_proxies.t
mcoder-0.10/t/4_sugar.t
mcoder-0.10/t/1_use.t
mcoder-0.10/t/3_getset.t
mcoder-0.10/lib/
mcoder-0.10/lib/mcoder/
mcoder-0.10/lib/mcoder/bool/
mcoder-0.10/lib/mcoder/bool/unset.pm
mcoder-0.10/lib/mcoder/bool/set.pm
mcoder-0.10/lib/mcoder/array/
mcoder-0.10/lib/mcoder/array/get.pm
mcoder-0.10/lib/mcoder/array/set.pm
mcoder-0.10/lib/mcoder/array/calculated.pm
mcoder-0.10/lib/mcoder/get.pm
mcoder-0.10/lib/mcoder/virtual.pm
mcoder-0.10/lib/mcoder/set.pm
mcoder-0.10/lib/mcoder/calculated.pm
mcoder-0.10/lib/mcoder/proxy.pm
mcoder-0.10/lib/mcoder.pm
mcoder-0.10/README
mcoder-0.10/Changes
mcoder-0.10/Makefile.PL
mcoder-0.10/META.yml
mcoder-0.10/MANIFEST

  CPAN.pm: Going to build S/SA/SALVA/mcoder-0.10.tar.gz

>>> /export/home/fly1003/bin/perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for mcoder
>>> make
cp lib/mcoder/set.pm blib/lib/mcoder/set.pm
cp lib/mcoder/array/set.pm blib/lib/mcoder/array/set.pm
cp lib/mcoder/proxy.pm blib/lib/mcoder/proxy.pm
cp lib/mcoder/bool/set.pm blib/lib/mcoder/bool/set.pm
cp lib/mcoder/array/calculated.pm blib/lib/mcoder/array/calculated.pm
cp lib/mcoder/get.pm blib/lib/mcoder/get.pm
cp lib/mcoder/array/get.pm blib/lib/mcoder/array/get.pm
cp lib/mcoder/bool/unset.pm blib/lib/mcoder/bool/unset.pm
cp lib/mcoder/calculated.pm blib/lib/mcoder/calculated.pm
cp lib/mcoder/virtual.pm blib/lib/mcoder/virtual.pm
cp lib/mcoder.pm blib/lib/mcoder.pm
Manifying blib/man3/mcoder::set.3
Manifying blib/man3/mcoder::array::set.3
Manifying blib/man3/mcoder::bool::set.3
Manifying blib/man3/mcoder::proxy.3
Manifying blib/man3/mcoder::array::calculated.3
Manifying blib/man3/mcoder::get.3
Manifying blib/man3/mcoder::array::get.3
Manifying blib/man3/mcoder::virtual.3
Manifying blib/man3/mcoder::calculated.3
Manifying blib/man3/mcoder::bool::unset.3
Manifying blib/man3/mcoder.3
  SALVA/mcoder-0.10.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /export/home/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/1_use........
1..1
ok 1 - use mcoder;
ok
t/2_proxies....
1..3
ok 1 - first proxy
ok 2 - second proxy
ok 3 - second proxy with args
ok
t/3_getset.....
1..16
ok 1 - constructor
ok 2 - weight
ok 3 - weight cached
ok 4 - set_weight
ok 5 - weight
ok 6 - undefined weight
ok 7 - deleted weight
ok 8 - set
ok 9 - get after ctor
ok 10 - cobarde, pecador, aigg!
ok 11 - good
ok 12 - bad
ok 13 - good 4
ok 14 - sons
ok 15 - sons cached
ok 16 - empty sons
ok
t/4_sugar......
1..11
ok 1 - new legs
ok 2 - new man
ok 3 - man legs
ok 4 - running
ok 5 - walking
ok 6 - fast
ok 7 - slow
ok 8 - good
ok 9 - bad
ok 10 - undefined sons
ok 11 - sons
ok
All tests successful.
Files=4, Tests=31,  2 wallclock secs ( 0.34 usr  0.04 sys +  1.09 cusr  0.12 csys =  1.59 CPU)
Result: PASS
  SALVA/mcoder-0.10.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up abstract from Makefile
<SOFTPKG NAME="mcoder" VERSION="0.10" DATE="2005-04-29">
  <AUTHOR CPAN="SALVA">Salvador Fandino Garcia &lt;salva@cpan.org></AUTHOR>
  <ABSTRACT>perl method generator from common templates</ABSTRACT>
  <ARCHITECTURE NAME="sun4-solaris-thread-multi-5.10"/>
  <CODEBASE HREF="mcoder-0.10.tar.gz"/>
  <PROVIDE NAME="mcoder::" VERSION="0.10"/>
  <PROVIDE NAME="mcoder::set" VERSION="0.02"/>
  <PROVIDE NAME="mcoder::proxy" VERSION="0.02"/>
  <PROVIDE NAME="mcoder::get" VERSION="0.02"/>
  <PROVIDE NAME="mcoder::calculated" VERSION="0.03"/>
  <PROVIDE NAME="mcoder::virtual" VERSION="0.01"/>
  <PROVIDE NAME="mcoder::array::set" VERSION="0.01"/>
  <PROVIDE NAME="mcoder::array::calculated" VERSION="0.01"/>
  <PROVIDE NAME="mcoder::array::get" VERSION="0.01"/>
  <PROVIDE NAME="mcoder::bool::set" VERSION="0.01"/>
  <PROVIDE NAME="mcoder::bool::unset" VERSION="0.01"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2008-10-11 with ActivePerl-1003 on knife (SunOS knife 5.8 Generic_117350-55 sun4u sparc SUNW,Ultra-250) -->
</SOFTPKG>
>>> (cd /export/home/fly1003/var/cpan/build/mcoder-0.10-w71RPe && tar cvf - mcoder-0.10.ppd blib) | gzip -c >/export/home/fly1003/var/REPO/S/SA/SALVA/mcoder-0.10.tar.gz
mcoder-0.10.ppd
blib/
blib/lib/
blib/lib/mcoder/
blib/lib/mcoder/set.pm
blib/lib/mcoder/array/
blib/lib/mcoder/array/set.pm
blib/lib/mcoder/array/calculated.pm
blib/lib/mcoder/array/get.pm
blib/lib/mcoder/proxy.pm
blib/lib/mcoder/bool/
blib/lib/mcoder/bool/set.pm
blib/lib/mcoder/bool/unset.pm
blib/lib/mcoder/get.pm
blib/lib/mcoder/calculated.pm
blib/lib/mcoder/virtual.pm
blib/lib/mcoder.pm
blib/man3/
blib/man3/mcoder::set.3
blib/man3/mcoder::array::set.3
blib/man3/mcoder::bool::set.3
blib/man3/mcoder::proxy.3
blib/man3/mcoder::array::calculated.3
blib/man3/mcoder::get.3
blib/man3/mcoder::array::get.3
blib/man3/mcoder::virtual.3
blib/man3/mcoder::calculated.3
blib/man3/mcoder::bool::unset.3
blib/man3/mcoder.3
>>> mv /export/home/fly1003/var/cpan/build/mcoder-0.10-w71RPe/mcoder-0.10.ppd /export/home/fly1003/var/REPO/S/SA/SALVA
Finished 2008-10-11T18:58:47