PATH=/opt/SUNWspro/bin:/usr/local/bin:/opt/csw/bin:/usr/ccs/bin:/usr/bin:/usr/sbin Start 2014-12-20T18:18:24 ActivePerl-1205 CPAN-2.00 Reading '/export/home/fly1232/var/cpan/Metadata' Database was generated on Sun, 21 Dec 2014 01:17:02 GMT Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz Fetching with LWP: http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz Fetching with LWP: http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/CHECKSUMS Checksum for /export/home/fly1232/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz ok Perinci-CmdLine-Lite-0.70/ Perinci-CmdLine-Lite-0.70/Changes Perinci-CmdLine-Lite-0.70/LICENSE Perinci-CmdLine-Lite-0.70/MANIFEST Perinci-CmdLine-Lite-0.70/lib/ Perinci-CmdLine-Lite-0.70/lib/Test/ Perinci-CmdLine-Lite-0.70/lib/Test/Perinci/ Perinci-CmdLine-Lite-0.70/lib/Test/Perinci/CmdLine.pm Perinci-CmdLine-Lite-0.70/lib/Perinci/ Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/ Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual.pod Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/ Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/Examples.pod Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/FAQ.pod Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Base.pm Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Lite.pm Perinci-CmdLine-Lite-0.70/README Perinci-CmdLine-Lite-0.70/META.json Perinci-CmdLine-Lite-0.70/Makefile.PL Perinci-CmdLine-Lite-0.70/dist.ini Perinci-CmdLine-Lite-0.70/t/ Perinci-CmdLine-Lite-0.70/t/release-rinci.t Perinci-CmdLine-Lite-0.70/t/complete.t Perinci-CmdLine-Lite-0.70/t/release-pod-coverage.t Perinci-CmdLine-Lite-0.70/t/00-compile.t Perinci-CmdLine-Lite-0.70/t/01-embed.t Perinci-CmdLine-Lite-0.70/t/run.t Perinci-CmdLine-Lite-0.70/t/release-pod-syntax.t Perinci-CmdLine-Lite-0.70/weaver.ini Perinci-CmdLine-Lite-0.70/META.yml CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz >>> /export/home/fly1232/bin/perl Makefile.PL Warning: prerequisite Perinci::Sub::Complete 0.69 not found. We have 0.67. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Perinci::CmdLine::Lite Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz ---- Perinci::Sub::Complete [requires] Running make test Delayed until after prerequisites Running test for module 'Perinci::Sub::Complete' Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz Fetching with LWP: http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz Checksum for /export/home/fly1232/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz ok Perinci-Sub-Complete-0.69/ Perinci-Sub-Complete-0.69/Changes Perinci-Sub-Complete-0.69/LICENSE Perinci-Sub-Complete-0.69/MANIFEST Perinci-Sub-Complete-0.69/lib/ Perinci-Sub-Complete-0.69/lib/Perinci/ Perinci-Sub-Complete-0.69/lib/Perinci/Sub/ Perinci-Sub-Complete-0.69/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.69/README Perinci-Sub-Complete-0.69/META.json Perinci-Sub-Complete-0.69/Makefile.PL Perinci-Sub-Complete-0.69/dist.ini Perinci-Sub-Complete-0.69/t/ Perinci-Sub-Complete-0.69/t/complete_from_schema.t Perinci-Sub-Complete-0.69/t/release-rinci.t Perinci-Sub-Complete-0.69/t/release-pod-coverage.t Perinci-Sub-Complete-0.69/t/00-compile.t Perinci-Sub-Complete-0.69/t/complete_arg_val.t Perinci-Sub-Complete-0.69/t/release-pod-syntax.t Perinci-Sub-Complete-0.69/t/complete_cli_arg.t Perinci-Sub-Complete-0.69/t/complete_arg_elem.t Perinci-Sub-Complete-0.69/weaver.ini Perinci-Sub-Complete-0.69/META.yml CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz >>> /export/home/fly1232/bin/perl Makefile.PL Warning: prerequisite Complete::Getopt::Long 0.19 not found. We have 0.18. Warning: prerequisite Perinci::Sub::Util 0.38 not found. We have 0.37. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz ---- Complete::Getopt::Long [requires] Perinci::Sub::Util [requires] Running make test Delayed until after prerequisites Running test for module 'Complete::Getopt::Long' Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.19.tar.gz Fetching with LWP: http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Complete-Getopt-Long-0.19.tar.gz Checksum for /export/home/fly1232/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Getopt-Long-0.19.tar.gz ok Complete-Getopt-Long-0.19/ Complete-Getopt-Long-0.19/Changes Complete-Getopt-Long-0.19/LICENSE Complete-Getopt-Long-0.19/MANIFEST Complete-Getopt-Long-0.19/lib/ Complete-Getopt-Long-0.19/lib/Complete/ Complete-Getopt-Long-0.19/lib/Complete/Getopt/ Complete-Getopt-Long-0.19/lib/Complete/Getopt/Long.pm Complete-Getopt-Long-0.19/README Complete-Getopt-Long-0.19/META.json Complete-Getopt-Long-0.19/Makefile.PL Complete-Getopt-Long-0.19/dist.ini Complete-Getopt-Long-0.19/t/ Complete-Getopt-Long-0.19/t/release-rinci.t Complete-Getopt-Long-0.19/t/release-pod-coverage.t Complete-Getopt-Long-0.19/t/00-compile.t Complete-Getopt-Long-0.19/t/release-pod-syntax.t Complete-Getopt-Long-0.19/t/complete_cli_arg.t Complete-Getopt-Long-0.19/weaver.ini Complete-Getopt-Long-0.19/META.yml CPAN.pm: Building P/PE/PERLANCAR/Complete-Getopt-Long-0.19.tar.gz >>> /export/home/fly1232/bin/perl Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Complete::Getopt::Long Writing MYMETA.yml and MYMETA.json >>> make cp lib/Complete/Getopt/Long.pm blib/lib/Complete/Getopt/Long.pm Manifying 1 pod document PERLANCAR/Complete-Getopt-Long-0.19.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1232/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Complete/Getopt/Long.pm loaded ok ok t/complete_cli_arg.t ...... # Subtest: basics # Subtest: option name ok 1 - result 1..1 ok 1 - option name # Subtest: option name (2) ok 1 - result 1..1 ok 2 - option name (2) # Subtest: option name (3) ok 1 - result 1..1 ok 3 - option name (3) # Subtest: option name (single letter n! does not get --nox and --no-x) ok 1 - result 1..1 ok 4 - option name (single letter n! does not get --nox and --no-x) # Subtest: option name (bundling) ok 1 - result 1..1 ok 5 - option name (bundling) # Subtest: option name (bundling, stops after value expected) ok 1 - result 1..1 ok 6 - option name (bundling, stops after value expected) # Subtest: option name (bundling 2) ok 1 - result 1..1 ok 7 - option name (bundling 2) # Subtest: option name with mentioned non-repeatable option (alias) ok 1 - result 1..1 ok 8 - option name with mentioned non-repeatable option (alias) # Subtest: option name with mentioned non-repeatable option (alias 2) ok 1 - result 1..1 ok 9 - option name with mentioned non-repeatable option (alias 2) # Subtest: option name with mentioned non-repeatable option (bundling) ok 1 - result 1..1 ok 10 - option name with mentioned non-repeatable option (bundling) # Subtest: repeatable option name 1 (assigned to arrayref) ok 1 - result 1..1 ok 11 - repeatable option name 1 (assigned to arrayref) # Subtest: repeatable option name 2 (desttype @) ok 1 - result 1..1 ok 12 - repeatable option name 2 (desttype @) # Subtest: repeatable option name 3 (desttype %) ok 1 - result 1..1 ok 13 - repeatable option name 3 (desttype %) # Subtest: repeatable option name 4 (incremental) ok 1 - result 1..1 ok 14 - repeatable option name 4 (incremental) # Subtest: option name + arg completion ok 1 - result 1..1 ok 15 - option name + arg completion # Subtest: option name ok 1 - result 1..1 ok 16 - option name # Subtest: option value without completion routine ok 1 - result 1..1 ok 17 - option value without completion routine # Subtest: option value without completion routine (2) ok 1 - result 1..1 ok 18 - option value without completion routine (2) # Subtest: option value for unknown option ok 1 - result 1..1 ok 19 - option value for unknown option # Subtest: option value for option that does not expect value ok 1 - result 1..1 ok 20 - option value for option that does not expect value # Subtest: option value with completion routine returning array ok 1 - result 1..1 ok 21 - option value with completion routine returning array # Subtest: extras argument ok 1 - result 1..1 ok 22 - extras argument 1..22 ok 1 - basics 1..1 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=5, Tests=2, 1 wallclock secs ( 0.11 usr 0.03 sys + 0.69 cusr 0.13 csys = 0.96 CPU) Result: PASS PERLANCAR/Complete-Getopt-Long-0.19.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Complete command-line argument using Getopt::Long specification >>> (cd /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v && tar cvf - Complete-Getopt-Long-0.19.ppd blib) | gzip -c >/export/home/fly1232/var/REPO/P/PE/PERLANCAR/Complete-Getopt-Long-0.19.tar.gz Complete-Getopt-Long-0.19.ppd blib/ blib/lib/ blib/lib/Complete/ blib/lib/Complete/Getopt/ blib/lib/Complete/Getopt/Long.pm blib/man3/ blib/man3/Complete::Getopt::Long.3 >>> mv /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/Complete-Getopt-Long-0.19.ppd /export/home/fly1232/var/REPO/P/PE/PERLANCAR Running test for module 'Perinci::Sub::Util' Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz Prepending /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'get' Checksum for /export/home/fly1232/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz ok Perinci-Sub-Util-0.40/ Perinci-Sub-Util-0.40/Changes Perinci-Sub-Util-0.40/LICENSE Perinci-Sub-Util-0.40/MANIFEST Perinci-Sub-Util-0.40/lib/ Perinci-Sub-Util-0.40/lib/Perinci/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ResObj.pm Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/Sort.pm Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util.pm Perinci-Sub-Util-0.40/README Perinci-Sub-Util-0.40/META.json Perinci-Sub-Util-0.40/Makefile.PL Perinci-Sub-Util-0.40/dist.ini Perinci-Sub-Util-0.40/t/ Perinci-Sub-Util-0.40/t/release-rinci.t Perinci-Sub-Util-0.40/t/release-pod-coverage.t Perinci-Sub-Util-0.40/t/caller.t Perinci-Sub-Util-0.40/t/00-compile.t Perinci-Sub-Util-0.40/t/gen_modified_sub.t Perinci-Sub-Util-0.40/t/err.t Perinci-Sub-Util-0.40/t/release-pod-syntax.t Perinci-Sub-Util-0.40/weaver.ini Perinci-Sub-Util-0.40/META.yml Prepending /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'make' CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz >>> /export/home/fly1232/bin/perl Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Util Writing MYMETA.yml and MYMETA.json >>> make cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm Manifying 3 pod documents PERLANCAR/Perinci-Sub-Util-0.40.tar.gz make -- OK Prepending /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1232/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..3 ok 1 - Perinci/Sub/Util.pm loaded ok ok 2 - Perinci/Sub/Util/ResObj.pm loaded ok ok 3 - Perinci/Sub/Util/Sort.pm loaded ok ok t/caller.t ................ ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 1..6 ok t/err.t ................... # Subtest: defaults ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - result ok 7 - result metadata is hash 1..7 ok 1 - defaults # Subtest: set status ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 1..4 ok 2 - set status # Subtest: set message ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message 1..5 ok 3 - set message # Subtest: set prev ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 ok 5 - message ok 6 - prev 1..6 ok 4 - set prev # Subtest: caller ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - log[0] type ok 7 - log[0] time ok 8 - log[0] package ok 9 - log[0] func ok 10 - log[0] line 1..10 ok 5 - caller # Subtest: stack_trace ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - stack_trace 1..5 ok 6 - stack_trace # Subtest: stack_trace only produced once ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 501 ok 5 - stack_trace 1..5 ok 7 - stack_trace only produced once 1..7 ok t/gen_modified_sub.t ...... ok 1 ok 2 1..2 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=7, Tests=18, 2 wallclock secs ( 0.16 usr 0.02 sys + 1.03 cusr 0.17 csys = 1.38 CPU) Result: PASS PERLANCAR/Perinci-Sub-Util-0.40.tar.gz make test TEST_VERBOSE=1 -- OK PPD for Perinci-Sub-Util-0.40 already made Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'make' CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz make -- OK Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1232/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok t/complete_cli_arg.t ...... # Subtest: arg name (no dash) ok 1 - result 1..1 ok 1 - arg name (no dash) # Subtest: arg name 2 (dash) ok 1 - result 1..1 ok 2 - arg name 2 (dash) # Subtest: arg name 3 (sole completion) ok 1 - result 1..1 ok 3 - arg name 3 (sole completion) # Subtest: arg name 3 (unknown option) ok 1 - result 1..1 ok 4 - arg name 3 (unknown option) # Subtest: arg value (schema) ok 1 - result 1..1 ok 5 - arg value (schema) # Subtest: arg value (schema) #2 ok 1 - result 1..1 ok 6 - arg value (schema) \#2 # Subtest: arg value (spec "completion") ok 1 - result 1..1 ok 7 - arg value (spec "completion") # Subtest: arg value, pos ok 1 - result 1..1 ok 8 - arg value, pos # Subtest: arg value, pos + greedy ok 1 - result 1..1 ok 9 - arg value, pos + greedy # Subtest: custom completion (option value for function arg) ok 1 - result 1..1 ok 10 - custom completion (option value for function arg) # Subtest: custom completion (option value for common option) ok 1 - result 1..1 ok 11 - custom completion (option value for common option) # Subtest: custom completion (option value, unknown option) ok 1 - result 1..1 ok 12 - custom completion (option value, unknown option) # Subtest: custom completion (positional cli arg with no matching function arg) ok 1 - result 1..1 ok 13 - custom completion (positional cli arg with no matching function arg) # Subtest: custom completion (positional cli arg for non-greedy arg) ok 1 - result 1..1 ok 14 - custom completion (positional cli arg for non-greedy arg) # Subtest: custom completion (positional cli arg for greedy arg) ok 1 - result 1..1 ok 15 - custom completion (positional cli arg for greedy arg) # Subtest: args passed to completion routine # Subtest: in arg completion property ok 1 ok 2 ok 3 - result 1..3 ok 1 - in arg completion property # Subtest: in arg element_completion property ok 1 ok 2 - result 1..2 ok 2 - in arg element_completion property # Subtest: in custom completion ok 1 ok 2 - result 1..2 ok 3 - in custom completion 1..3 ok 16 - args passed to completion routine 1..16 ok t/complete_from_schema.t .. # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 1 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 2 - float 1..2 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=8, Tests=21, 2 wallclock secs ( 0.17 usr 0.06 sys + 1.45 cusr 0.19 csys = 1.87 CPU) Result: PASS PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Complete command-line argument using Rinci metadata >>> (cd /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd && tar cvf - Perinci-Sub-Complete-0.69.ppd blib) | gzip -c >/export/home/fly1232/var/REPO/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz Perinci-Sub-Complete-0.69.ppd blib/ blib/lib/ blib/lib/Perinci/ blib/lib/Perinci/Sub/ blib/lib/Perinci/Sub/Complete.pm blib/man3/ blib/man3/Perinci::Sub::Complete.3 >>> mv /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/Perinci-Sub-Complete-0.69.ppd /export/home/fly1232/var/REPO/P/PE/PERLANCAR Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/lib /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /export/home/fly1232/var/cpan/build/Perinci-CmdLine-Lite-0.70-VHBQEM Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/lib /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'make' CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz >>> make cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm cp lib/Perinci/CmdLine/Manual/Examples.pod blib/lib/Perinci/CmdLine/Manual/Examples.pod cp lib/Test/Perinci/CmdLine.pm blib/lib/Test/Perinci/CmdLine.pm cp lib/Perinci/CmdLine/Manual/FAQ.pod blib/lib/Perinci/CmdLine/Manual/FAQ.pod cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm cp lib/Perinci/CmdLine/Manual.pod blib/lib/Perinci/CmdLine/Manual.pod Manifying 6 pod documents PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz make -- OK Prepending /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Complete-0.69-HtoDzd/blib/lib /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/arch /export/home/fly1232/var/cpan/build/Perinci-Sub-Util-0.40-rPvoEi/blib/lib /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/arch /export/home/fly1232/var/cpan/build/Complete-Getopt-Long-0.19-1sFW5v/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/export/home/fly1232/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..3 ok 1 - Perinci/CmdLine/Base.pm loaded ok ok 2 - Perinci/CmdLine/Lite.pm loaded ok ok 3 - Test/Perinci/CmdLine.pm loaded ok ok t/01-embed.t .............. # Subtest: test_run: run works ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: run works # Subtest: test_complete: cmd --bar^ ok 1 - exit code = 0 ok 2 - result 1..2 ok 2 - test_complete: cmd --bar^ 1..2 ok t/complete.t .............. # Subtest: test_complete: cmd --s1 ap^ ok 1 - exit code = 0 ok 2 - result 1..2 ok 1 - test_complete: cmd --s1 ap^ 1..1 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing t/run.t ................... # Subtest: help action # Subtest: test_run: --help ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: --help # Subtest: test_run: has subcommands ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 2 - test_run: has subcommands # Subtest: test_run: help on subcommand ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 3 - test_run: help on subcommand 1..3 ok 1 - help action # Subtest: version action # Subtest: test_run: --version ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: --version 1..1 ok 2 - version action # Subtest: subcommands action # Subtest: test_run: --subcommands ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: --subcommands # Subtest: test_run: unknown subcommand = error ok 1 - doesn't die ok 2 - exit code 1..2 ok 2 - test_run: unknown subcommand = error # Subtest: test_run: default_subcommand ok 1 - doesn't die ok 2 - exit code 1..2 ok 3 - test_run: default_subcommand # Subtest: test_run: default_subcommand 2 ok 1 - doesn't die ok 2 - exit code 1..2 ok 4 - test_run: default_subcommand 2 1..4 ok 3 - subcommands action # Subtest: output formats # Subtest: test_run: --json ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: --json # Subtest: text-pretty # Subtest: test_run: undef ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: undef # Subtest: test_run: scalar ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 2 - test_run: scalar # Subtest: test_run: empty array ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 3 - test_run: empty array # Subtest: test_run: aos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 4 - test_run: aos # Subtest: test_run: aoaos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 5 - test_run: aoaos # Subtest: test_run: aohos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 6 - test_run: aohos # Subtest: test_run: hos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 7 - test_run: hos # Subtest: test_run: hohos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 8 - test_run: hohos 1..8 ok 2 - text-pretty # Subtest: text-simple # Subtest: test_run: undef ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: undef # Subtest: test_run: scalar ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 2 - test_run: scalar # Subtest: test_run: empty array ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 3 - test_run: empty array # Subtest: test_run: aos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 4 - test_run: aos # Subtest: test_run: aoaos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 5 - test_run: aoaos # Subtest: test_run: aohos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 6 - test_run: aohos # Subtest: test_run: hos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 7 - test_run: hos # Subtest: test_run: hohos ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 8 - test_run: hohos 1..8 ok 3 - text-simple 1..3 ok 4 - output formats # Subtest: call action # Subtest: test_run: single command ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 1 - test_run: single command # Subtest: test_run: default property of arg spec is observed ok 1 - doesn't die ok 2 - exit code ok 3 - default number of pairs 1..3 ok 2 - test_run: default property of arg spec is observed # Subtest: test_run: schema default of arg is observed ok 1 - doesn't die ok 2 - exit code 1..2 ok 3 - test_run: schema default of arg is observed # Subtest: test_run: multiple subcommands (subcommand not specified -> help) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 4 - test_run: multiple subcommands (subcommand not specified -> help) # Subtest: test_run: multiple subcommands (subc specified via first cli arg) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 5 - test_run: multiple subcommands (subc specified via first cli arg) # Subtest: test_run: multiple subcommands (subc specified via default_subcommand) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 6 - test_run: multiple subcommands (subc specified via default_subcommand) # Subtest: test_run: multiple subcommands (subc specified via --cmd) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 7 - test_run: multiple subcommands (subc specified via --cmd) # Subtest: test_run: args_as array ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 8 - test_run: args_as array # Subtest: test_run: args_as arrayref ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 9 - test_run: args_as arrayref # Subtest: test_run: args_as hashref ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 10 - test_run: args_as hashref # Subtest: test_run: result_naked ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 11 - test_run: result_naked 1..11 ok 5 - call action # Subtest: cmdline_src # Subtest: test_run: unknown value ok 1 - doesn't die ok 2 - status 1..2 ok 1 - test_run: unknown value # Subtest: test_run: arg type not str/array ok 1 - doesn't die ok 2 - status 1..2 ok 2 - test_run: arg type not str/array # Subtest: test_run: multiple stdin ok 1 - doesn't die ok 2 - status 1..2 ok 3 - test_run: multiple stdin # Subtest: test_run: file 1 ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 4 - test_run: file 1 # Subtest: test_run: file 1 (special hint arguments passed) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 5 - test_run: file 1 (special hint arguments passed) # Subtest: test_run: file 2 ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 6 - test_run: file 2 # Subtest: test_run: file 2 (special hint arguments passed) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 7 - test_run: file 2 (special hint arguments passed) # Subtest: test_run: file not found ok 1 - doesn't die ok 2 - status 1..2 ok 8 - test_run: file not found # Subtest: test_run: file, missing required arg ok 1 - doesn't die ok 2 - status 1..2 ok 9 - test_run: file, missing required arg # Subtest: test_run: stdin_or_files file ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 10 - test_run: stdin_or_files file # Subtest: test_run: stdin_or_files file (special hint arguments passed) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 11 - test_run: stdin_or_files file (special hint arguments passed) # Subtest: test_run: stdin_or_files file not found ok 1 - doesn't die ok 2 - status 1..2 ok 12 - test_run: stdin_or_files file not found # Subtest: test_run: stdin str ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 13 - test_run: stdin str # Subtest: test_run: stdin str (special hint arguments passed) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 14 - test_run: stdin str (special hint arguments passed) # Subtest: test_run: stdin array ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 15 - test_run: stdin array # Subtest: test_run: stdin + arg set to "-" ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 16 - test_run: stdin + arg set to "-" # Subtest: test_run: stdin + arg set to non "-" ok 1 - doesn't die ok 2 - status 1..2 ok 17 - test_run: stdin + arg set to non "-" # Subtest: test_run: stdin_line + from stdin ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 18 - test_run: stdin_line + from stdin # Subtest: test_run: stdin_line + from stdin (special hint arguments passed) ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 19 - test_run: stdin_line + from stdin (special hint arguments passed) # Subtest: test_run: stdin_line + from cmdline ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 20 - test_run: stdin_line + from cmdline # Subtest: test_run: multi stdin_line ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 21 - test_run: multi stdin_line 1..21 ok 6 - cmdline_src # Subtest: result metadata # Subtest: cmdline.exit_code # Subtest: test_run: ok 1 - doesn't die ok 2 - exit code ok 3 - status 1..3 ok 1 - test_run: 1..1 ok 1 - cmdline.exit_code # Subtest: cmdline.result # Subtest: test_run: ok 1 - doesn't die ok 2 - output_re 1..2 ok 1 - test_run: 1..1 ok 2 - cmdline.result # Subtest: cmdline.default_format # Subtest: test_run: ok 1 - doesn't die ok 2 - output_re 1..2 ok 1 - test_run: # Subtest: test_run: --format text ok 1 - doesn't die ok 2 - output_re 1..2 ok 2 - test_run: --format text 1..2 ok 3 - cmdline.default_format # Subtest: cmdline.skip_format # Subtest: test_run: ok 1 - doesn't die ok 2 - output_re 1..2 ok 1 - test_run: 1..1 ok 4 - cmdline.skip_format 1..4 ok 7 - result metadata # Subtest: config # Subtest: test_run: config_dirs ok 1 - doesn't die ok 2 - output_re 1..2 ok 1 - test_run: config_dirs # Subtest: test_run: config_filename ok 1 - doesn't die ok 2 - output_re 1..2 ok 2 - test_run: config_filename # Subtest: test_run: --no-config ok 1 - doesn't die ok 2 - output_re 1..2 ok 3 - test_run: --no-config # Subtest: test_run: --config-path ok 1 - doesn't die ok 2 - output_re 1..2 ok 4 - test_run: --config-path # Subtest: test_run: --config-profile ok 1 - doesn't die ok 2 - output_re 1..2 ok 5 - test_run: --config-profile # Subtest: test_run: unknown config profile -> error ok 1 - doesn't die ok 2 - status 1..2 ok 6 - test_run: unknown config profile -> error # Subtest: test_run: unknown config profile but does not read config -> ok ok 1 - doesn't die ok 2 - output_re 1..2 ok 7 - test_run: unknown config profile but does not read config -> ok # Subtest: test_run: unknown config profile but set ignore_missing_config_profile_section -> ok ok 1 - doesn't die ok 2 - output_re 1..2 ok 8 - test_run: unknown config profile but set ignore_missing_config_profile_section -> ok # Subtest: test_run: subcommand ok 1 - doesn't die ok 2 - output_re 1..2 ok 9 - test_run: subcommand # Subtest: test_run: subcommand + --config-profile ok 1 - doesn't die ok 2 - output_re 1..2 ok 10 - test_run: subcommand + --config-profile # Subtest: test_run: array-ify if argument is array ok 1 - doesn't die ok 2 - exit code ok 3 - output_re 1..3 ok 11 - test_run: array-ify if argument is array 1..11 ok 8 - config 1..8 ok All tests successful. Files=7, Tests=14, 4 wallclock secs ( 0.20 usr 0.08 sys + 3.40 cusr 0.45 csys = 4.13 CPU) Result: PASS PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> A lightweight Rinci/Riap-based command-line application framework >>> (cd /export/home/fly1232/var/cpan/build/Perinci-CmdLine-Lite-0.70-VHBQEM && tar cvf - Perinci-CmdLine-Lite-0.70.ppd blib) | gzip -c >/export/home/fly1232/var/REPO/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz Perinci-CmdLine-Lite-0.70.ppd blib/ blib/lib/ blib/lib/Perinci/ blib/lib/Perinci/CmdLine/ blib/lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Manual/ blib/lib/Perinci/CmdLine/Manual/Examples.pod blib/lib/Perinci/CmdLine/Manual/FAQ.pod blib/lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Manual.pod blib/lib/Test/ blib/lib/Test/Perinci/ blib/lib/Test/Perinci/CmdLine.pm blib/man3/ blib/man3/Perinci::CmdLine::Base.3 blib/man3/Perinci::CmdLine::Lite.3 blib/man3/Perinci::CmdLine::Manual.3 blib/man3/Perinci::CmdLine::Manual::Examples.3 blib/man3/Perinci::CmdLine::Manual::FAQ.3 blib/man3/Test::Perinci::CmdLine.3 >>> mv /export/home/fly1232/var/cpan/build/Perinci-CmdLine-Lite-0.70-VHBQEM/Perinci-CmdLine-Lite-0.70.ppd /export/home/fly1232/var/REPO/P/PE/PERLANCAR Finished 2014-12-20T18:19:10