Setting PATH to /opt/SUNWspro/bin:/usr/local/bin:/opt/csw/bin:/usr/ccs/bin:/usr/bin:/usr/sbin
Start 2010-10-27T08:12:43
ActivePerl-818 CPAN-1.9402
Going to read '/export/home/fly818/var/cpan/Metadata'
Database was generated on Tue, 26 Oct 2010 21:30:39 GMT
Running make for D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz
Checksum for /net/nas/data/cpan/authors/id/D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz ok
Will not use Archive::Tar, need 1.00
Package-DeprecationManager-0.10
Package-DeprecationManager-0.10/README
Package-DeprecationManager-0.10/Changes
Package-DeprecationManager-0.10/LICENSE
Package-DeprecationManager-0.10/INSTALL
Package-DeprecationManager-0.10/dist.ini
Package-DeprecationManager-0.10/META.yml
Package-DeprecationManager-0.10/MANIFEST
Package-DeprecationManager-0.10/t
Package-DeprecationManager-0.10/t/basic.t
Package-DeprecationManager-0.10/META.json
Package-DeprecationManager-0.10/SIGNATURE
Package-DeprecationManager-0.10/t/compile.t
Package-DeprecationManager-0.10/Makefile.PL
Package-DeprecationManager-0.10/t/release-eol.t
Package-DeprecationManager-0.10/t/release-no-tabs.t
Package-DeprecationManager-0.10/t/release-kwalitee.t
Package-DeprecationManager-0.10/t/release-pod-syntax.t
Package-DeprecationManager-0.10/t/release-pod-coverage.t
Package-DeprecationManager-0.10/lib/Package
Package-DeprecationManager-0.10/lib/Package/DeprecationManager.pm
CPAN.pm: Going to build D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz
>>> /export/home/fly818/bin/perl Makefile.PL
Warning: prerequisite Test::Fatal 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for Package::DeprecationManager
---- Unsatisfied dependencies detected during ----
---- DROLSKY/Package-DeprecationManager-0.10.tar.gz ----
Test::Fatal [build_requires]
Running make test
Delayed until after prerequisites
Running test for module 'Test::Fatal'
Running make for R/RJ/RJBS/Test-Fatal-0.001.tar.gz
Checksum for /net/nas/data/cpan/authors/id/R/RJ/RJBS/Test-Fatal-0.001.tar.gz ok
Will not use Archive::Tar, need 1.00
Test-Fatal-0.001
Test-Fatal-0.001/README
Test-Fatal-0.001/Changes
Test-Fatal-0.001/LICENSE
Test-Fatal-0.001/dist.ini
Test-Fatal-0.001/META.yml
Test-Fatal-0.001/MANIFEST
Test-Fatal-0.001/t
Test-Fatal-0.001/t/basic.t
Test-Fatal-0.001/META.json
Test-Fatal-0.001/Makefile.PL
Test-Fatal-0.001/lib/Test
Test-Fatal-0.001/lib/Test/Fatal.pm
Test-Fatal-0.001/t/release-pod-syntax.t
CPAN.pm: Going to build R/RJ/RJBS/Test-Fatal-0.001.tar.gz
>>> /export/home/fly818/bin/perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Test::Fatal
>>> make
cp lib/Test/Fatal.pm blib/lib/Test/Fatal.pm
Manifying blib/man3/Test::Fatal.3
RJBS/Test-Fatal-0.001.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /export/home/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t ...............
1..4
ok 1 - foo bar is like foo bar
ok 2 - no fatality means no exception
ok 3 - we die on demand
ok 4 - a success block runs, passing
ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
All tests successful.
Files=2, Tests=4, 3 wallclock secs ( 0.11 usr 0.00 sys + 0.19 cusr 0.06 csys = 0.36 CPU)
Result: PASS
RJBS/Test-Fatal-0.001.tar.gz
make test TEST_VERBOSE=1 -- OK
Ricardo SIGNES <rjbs@cpan.org>
incredibly simple helpers for testing code with exceptions
>>> (cd /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0 && tar cvf - Test-Fatal-0.001.ppd blib) | gzip -c >/export/home/fly818/var/REPO/R/RJ/RJBS/Test-Fatal-0.001.tar.gz
Test-Fatal-0.001.ppd
blib/
blib/lib/
blib/lib/Test/
blib/lib/Test/Fatal.pm
blib/man3/
blib/man3/Test::Fatal.3
>>> mv /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/Test-Fatal-0.001.ppd /export/home/fly818/var/REPO/R/RJ/RJBS
Running make for D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz
Prepending /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/arch /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /export/home/fly818/var/cpan/build/Package-DeprecationManager-0.10-MlVDAl
Prepending /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/arch /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/lib to PERL5LIB for 'make'
CPAN.pm: Going to build D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz
>>> make
cp lib/Package/DeprecationManager.pm blib/lib/Package/DeprecationManager.pm
Manifying blib/man3/Package::DeprecationManager.3
DROLSKY/Package-DeprecationManager-0.10.tar.gz
make -- OK
Prepending /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/arch /export/home/fly818/var/cpan/build/Test-Fatal-0.001-dpseR0/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /export/home/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t .................
ok 1 - must provide a set of deprecations when using Package::DeprecationManager
ok 2 - deprecation warning for foo
ok 3 - deprecation warning for bar
ok 4 - deprecation warning for baz, and message is generated by Package::DeprecationManager
ok 5 - no warning on second call to foo
ok 6 - no warning on second call to bar
ok 7 - no warning on second call to baz
ok 8 - warning for varies sub
ok 9 - warning for varies sub with different error
ok 10 - no warning for varies sub with same message as first call
ok 11 - no warning for foo with api_version = 0.01
ok 12 - no warning for bar with api_version = 0.01
ok 13 - no warning for baz with api_version = 0.01
ok 14 - deprecation warning for foo with api_version = 1.17
ok 15 - deprecation warning for bar with api_version = 1.17
ok 16 - no warning for baz with api_version = 1.17
ok 17 - no warning for quux(1)
ok 18 - got a warning for quux(10)
ok 19 - deprecation warning for call to My::Package2::foo() and mentions My::Baz but not My::Package[12]
ok 20 - no deprecation warning for second call to My::Package2::foo()
ok 21 - no deprecation warning for call to My::Package1::foo()
ok 22 - deprecation warning for call to My::Package2::foo() and mentions My::Baz but not My::Package[12]
ok 23 - no deprecation warning for second call to My::Package2::bar()
ok 24 - deprecation warning for call to My::Package1::foo() and mentions My::Quux but not My::Package[12]
ok 25 - no deprecation warning for second call to My::Package1::foo()
1..25
ok
t/compile.t ...............
ok 1 - no errors loading require Package::DeprecationManager
1..1
ok
t/release-eol.t ........... skipped: these tests are for release candidate testing
t/release-kwalitee.t ...... skipped: these tests are for release candidate testing
t/release-no-tabs.t ....... skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=26, 6 wallclock secs ( 0.13 usr 0.08 sys + 0.73 cusr 0.16 csys = 1.10 CPU)
Result: PASS
DROLSKY/Package-DeprecationManager-0.10.tar.gz
make test TEST_VERBOSE=1 -- OK
Dave Rolsky <autarch@urth.org>
Manage deprecation warnings for your distribution
>>> (cd /export/home/fly818/var/cpan/build/Package-DeprecationManager-0.10-MlVDAl && tar cvf - Package-DeprecationManager-0.10.ppd blib) | gzip -c >/export/home/fly818/var/REPO/D/DR/DROLSKY/Package-DeprecationManager-0.10.tar.gz
Package-DeprecationManager-0.10.ppd
blib/
blib/lib/
blib/lib/Package/
blib/lib/Package/DeprecationManager.pm
blib/man3/
blib/man3/Package::DeprecationManager.3
>>> mv /export/home/fly818/var/cpan/build/Package-DeprecationManager-0.10-MlVDAl/Package-DeprecationManager-0.10.ppd /export/home/fly818/var/REPO/D/DR/DROLSKY
Finished 2010-10-27T08:13:33