Start 2008-11-07T20:04:19
Going to read /export/home/fly818/var/cpan/Metadata
  Database was generated on Fri, 07 Nov 2008 11:26:53 GMT
Running make for J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
Checksum for /net/nas/data/cpan/authors/id/J/JA/JANPAZ/TeX-DVI-0.110.tar.gz ok
TeX-DVI-0.110/
TeX-DVI-0.110/t/
TeX-DVI-0.110/t/texput2.dvi
TeX-DVI-0.110/t/parse.t
TeX-DVI-0.110/t/dvi.t
TeX-DVI-0.110/t/cmr10.tfm
TeX-DVI-0.110/t/parse.txt
TeX-DVI-0.110/t/dvi_font.t
TeX-DVI-0.110/t/texput1.dvi
TeX-DVI-0.110/t/parse.dvi
TeX-DVI-0.110/Makefile.PL
TeX-DVI-0.110/Changes
TeX-DVI-0.110/lib/
TeX-DVI-0.110/lib/TeX/
TeX-DVI-0.110/lib/TeX/DVI.pm
TeX-DVI-0.110/lib/TeX/DVI/
TeX-DVI-0.110/lib/TeX/DVI/Parse.pm
TeX-DVI-0.110/README
TeX-DVI-0.110/MANIFEST

  CPAN.pm: Going to build J/JA/JANPAZ/TeX-DVI-0.110.tar.gz

>>> /export/home/fly818/bin/perl Makefile.PL
Warning: prerequisite Font::TFM 0.100 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for TeX::DVI
---- Unsatisfied dependencies detected during ----
----        JANPAZ/TeX-DVI-0.110.tar.gz       ----
    Font::TFM [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Font::TFM'
Running make for J/JA/JANPAZ/Font-TFM-0.130.tar.gz
Checksum for /net/nas/data/cpan/authors/id/J/JA/JANPAZ/Font-TFM-0.130.tar.gz ok
Font-TFM-0.130/
Font-TFM-0.130/Changes
Font-TFM-0.130/MANIFEST
Font-TFM-0.130/Makefile.PL
Font-TFM-0.130/README
Font-TFM-0.130/TFM.pm.PL
Font-TFM-0.130/backup/
Font-TFM-0.130/backup/TFM.pm
Font-TFM-0.130/backup/TFM.pm.src
Font-TFM-0.130/cmr10.tfm
Font-TFM-0.130/t/
Font-TFM-0.130/t/tfm.t

  CPAN.pm: Going to build J/JA/JANPAZ/Font-TFM-0.130.tar.gz

>>> /export/home/fly818/bin/perl Makefile.PL
Where should I search for tfm files (value of $Font::TFM::TEXFONTSDIR)
 [.:/packages/share/tex/lib/fonts] .:/packages/share/tex/lib/fonts
Checking if your kit is complete...
Looks good
Writing Makefile for Font::TFM
>>> make
/export/home/fly818/bin/perl TFM.pm.PL TFM.pm
Extracting TFM.pm (setting $TEXFONTSDIR to `.')
cp TFM.pm blib/lib/Font/TFM.pm
Manifying blib/man3/Font::TFM.3
  JANPAZ/Font-TFM-0.130.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
Skip blib/lib/Font/TFM.pm (unchanged)
PERL_DL_NONLAZY=1 /export/home/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/tfm....
1..12
Loading module Font::TFM
ok 1
Loading metric information about font cmr10
ok 2
Checking design size of cmr10
Got 10
ok 3
Checking width of letter A
Got 491521.25
ok 4
Checking kern expansion of Wo
Got -54613.75
ok 5
Test error message for non-existing font
ok 6
ok 7
Checking kern expansion of va
Got -36408.75
ok 8
Loading metric information about font cmr10, with hash parameters
ok 9
Checking width of letter A
Got 638977.625
ok 10
Loading metric information about font file ./cmr10.tfm
ok 11
Checking width of letter A
Got 638977.625
ok 12
ok
All tests successful.
Files=1, Tests=12,  0 wallclock secs ( 0.22 usr  0.04 sys +  0.19 cusr  0.05 csys =  0.50 CPU)
Result: PASS
  JANPAZ/Font-TFM-0.130.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from TFM.pm.PL
<SOFTPKG NAME="Font-TFM" VERSION="0.130" DATE="2001-10-02">
  <AUTHOR CPAN="JANPAZ">Jan Pazdziora &lt;adelton@fi.muni.cz></AUTHOR>
  <ABSTRACT>read information from TeX font metric files</ABSTRACT>
  <ARCHITECTURE NAME="sun4-solaris-thread-multi-5.8"/>
  <CODEBASE HREF="Font-TFM-0.130.tar.gz"/>
  <PROVIDE NAME="Font::TFM" VERSION="0.130"/>
  <!-- Built 2008-11-07 with ActivePerl-818 on knife (SunOS knife 5.8 Generic_117350-55 sun4u sparc SUNW,Ultra-250) -->
</SOFTPKG>
>>> (cd /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9 && tar cvf - Font-TFM-0.130.ppd blib) | gzip -c >/export/home/fly818/var/REPO/J/JA/JANPAZ/Font-TFM-0.130.tar.gz
Font-TFM-0.130.ppd
blib/
blib/lib/
blib/lib/Font/
blib/lib/Font/TFM.pm
blib/man3/
blib/man3/Font::TFM.3
>>> mv /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/Font-TFM-0.130.ppd /export/home/fly818/var/REPO/J/JA/JANPAZ
Running make for J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
Prepending /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/arch /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /export/home/fly818/var/cpan/build/TeX-DVI-0.110-hup7iz
Prepending /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/arch /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Going to build J/JA/JANPAZ/TeX-DVI-0.110.tar.gz

>>> make
cp lib/TeX/DVI/Parse.pm blib/lib/TeX/DVI/Parse.pm
cp lib/TeX/DVI.pm blib/lib/TeX/DVI.pm
Manifying blib/man3/TeX::DVI::Parse.3
Manifying blib/man3/TeX::DVI.3
  JANPAZ/TeX-DVI-0.110.tar.gz
  make -- OK
Prepending /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/arch /export/home/fly818/var/cpan/build/Font-TFM-0.130-PWhIX9/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /export/home/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/dvi.........
1..6
ok 1
Do new TeX::DVI "t/texput1.out"
ok 2
Fill write the DVI
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
t/dvi_font....
1..6
ok 1
Do new TeX::DVI "t/texput2.out"
ok 2
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
t/parse.......
1..6
ok 1
Do new TeX::DVI::Print("t/parse.dvi")
ok 2
Parse the file
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
All tests successful.
Files=3, Tests=18,  1 wallclock secs ( 0.26 usr  0.10 sys +  0.69 cusr  0.17 csys =  1.22 CPU)
Result: PASS
  JANPAZ/TeX-DVI-0.110.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from lib/TeX/DVI/Parse.pm
<SOFTPKG NAME="TeX-DVI" VERSION="0.110" DATE="2004-12-03">
  <AUTHOR CPAN="JANPAZ">Jan Pazdziora &lt;adelton@fi.muni.cz></AUTHOR>
  <ABSTRACT>parse TeX's DVI output file</ABSTRACT>
  <ARCHITECTURE NAME="sun4-solaris-thread-multi-5.8"/>
  <CODEBASE HREF="TeX-DVI-0.110.tar.gz"/>
  <PROVIDE NAME="TeX::DVI" VERSION="0.101"/>
  <PROVIDE NAME="TeX::DVI::Parse" VERSION="0.110"/>
  <REQUIRE NAME="Font::TFM" VERSION="0.100"/>
  <!-- Built 2008-11-07 with ActivePerl-818 on knife (SunOS knife 5.8 Generic_117350-55 sun4u sparc SUNW,Ultra-250) -->
</SOFTPKG>
>>> (cd /export/home/fly818/var/cpan/build/TeX-DVI-0.110-hup7iz && tar cvf - TeX-DVI-0.110.ppd blib) | gzip -c >/export/home/fly818/var/REPO/J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
TeX-DVI-0.110.ppd
blib/
blib/lib/
blib/lib/TeX/
blib/lib/TeX/DVI/
blib/lib/TeX/DVI/Parse.pm
blib/lib/TeX/DVI.pm
blib/man3/
blib/man3/TeX::DVI::Parse.3
blib/man3/TeX::DVI.3
>>> mv /export/home/fly818/var/cpan/build/TeX-DVI-0.110-hup7iz/TeX-DVI-0.110.ppd /export/home/fly818/var/REPO/J/JA/JANPAZ
Finished 2008-11-07T20:04:50