Start 2008-08-16T04:03:44
Going to read /home/fly1003/var/cpan/Metadata
  Database was generated on Fri, 15 Aug 2008 10:03:16 GMT
Running make for J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
Checksum for /net/nas/data/cpan/authors/id/J/JA/JANPAZ/TeX-DVI-0.110.tar.gz ok
TeX-DVI-0.110/
TeX-DVI-0.110/t/
TeX-DVI-0.110/t/texput2.dvi
TeX-DVI-0.110/t/parse.t
TeX-DVI-0.110/t/dvi.t
TeX-DVI-0.110/t/cmr10.tfm
TeX-DVI-0.110/t/parse.txt
TeX-DVI-0.110/t/dvi_font.t
TeX-DVI-0.110/t/texput1.dvi
TeX-DVI-0.110/t/parse.dvi
TeX-DVI-0.110/Makefile.PL
TeX-DVI-0.110/Changes
TeX-DVI-0.110/lib/
TeX-DVI-0.110/lib/TeX/
TeX-DVI-0.110/lib/TeX/DVI.pm
TeX-DVI-0.110/lib/TeX/DVI/
TeX-DVI-0.110/lib/TeX/DVI/Parse.pm
/bin/tar: Read 9216 bytes from -
TeX-DVI-0.110/README
TeX-DVI-0.110/MANIFEST

  CPAN.pm: Going to build J/JA/JANPAZ/TeX-DVI-0.110.tar.gz

>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Warning: prerequisite Font::TFM 0.100 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for TeX::DVI
---- Unsatisfied dependencies detected during ----
----        JANPAZ/TeX-DVI-0.110.tar.gz       ----
    Font::TFM [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Font::TFM'
Running make for J/JA/JANPAZ/Font-TFM-0.130.tar.gz
Checksum for /net/nas/data/cpan/authors/id/J/JA/JANPAZ/Font-TFM-0.130.tar.gz ok
Font-TFM-0.130/
Font-TFM-0.130/Changes
Font-TFM-0.130/MANIFEST
Font-TFM-0.130/Makefile.PL
Font-TFM-0.130/README
Font-TFM-0.130/TFM.pm.PL
Font-TFM-0.130/backup/
Font-TFM-0.130/backup/TFM.pm
Font-TFM-0.130/backup/TFM.pm.src
Font-TFM-0.130/cmr10.tfm
Font-TFM-0.130/t/
Font-TFM-0.130/t/tfm.t

  CPAN.pm: Going to build J/JA/JANPAZ/Font-TFM-0.130.tar.gz

>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Where should I search for tfm files (value of $Font::TFM::TEXFONTSDIR)
 [.:/packages/share/tex/lib/fonts] .:/packages/share/tex/lib/fonts
Checking if your kit is complete...
Looks good
Writing Makefile for Font::TFM
>>> make
/home/fly1003/ap1003/bin/perl-static TFM.pm.PL TFM.pm
Extracting TFM.pm (setting $TEXFONTSDIR to `.')
cp TFM.pm blib/lib/Font/TFM.pm
Manifying blib/man3/Font::TFM.3
  JANPAZ/Font-TFM-0.130.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/tfm....
1..12
Loading module Font::TFM
ok 1
Loading metric information about font cmr10
ok 2
Checking design size of cmr10
Got 10
ok 3
Checking width of letter A
Got 491521.25
ok 4
Checking kern expansion of Wo
Got -54613.75
ok 5
Test error message for non-existing font
ok 6
ok 7
Checking kern expansion of va
Got -36408.75
ok 8
Loading metric information about font cmr10, with hash parameters
ok 9
Checking width of letter A
Got 638977.625
ok 10
Loading metric information about font file ./cmr10.tfm
ok 11
Checking width of letter A
Got 638977.625
ok 12
ok
All tests successful.
Files=1, Tests=12,  1 wallclock secs ( 0.02 usr  0.00 sys +  0.02 cusr  0.00 csys =  0.04 CPU)
Result: PASS
  JANPAZ/Font-TFM-0.130.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from TFM.pm.PL
<SOFTPKG NAME="Font-TFM" VERSION="0.130" DATE="2001-10-02">
  <AUTHOR CPAN="JANPAZ">Jan Pazdziora &lt;adelton@fi.muni.cz></AUTHOR>
  <ABSTRACT>read information from TeX font metric files</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.10"/>
  <CODEBASE HREF="Font-TFM-0.130.tar.gz"/>
  <PROVIDE NAME="Font::TFM" VERSION="0.130"/>
  <!-- Built 2008-08-16 with ActivePerl-1003 on commodore (SuSE Linux 9.2 (x86-64), glibc 2.3.3 (20040917) stable) -->
</SOFTPKG>
>>> (cd /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq && tar cvf - Font-TFM-0.130.ppd blib) | gzip -c >/home/fly1003/var/REPO/J/JA/JANPAZ/Font-TFM-0.130.tar.gz
Font-TFM-0.130.ppd
blib/
blib/lib/
blib/lib/Font/
blib/lib/Font/TFM.pm
blib/man3/
blib/man3/Font::TFM.3
>>> mv /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/Font-TFM-0.130.ppd /home/fly1003/var/REPO/J/JA/JANPAZ
Running make for J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
Prepending /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/arch /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/fly1003/var/cpan/build/TeX-DVI-0.110-c5qxJn
Prepending /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/arch /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Going to build J/JA/JANPAZ/TeX-DVI-0.110.tar.gz

>>> make
cp lib/TeX/DVI/Parse.pm blib/lib/TeX/DVI/Parse.pm
cp lib/TeX/DVI.pm blib/lib/TeX/DVI.pm
Manifying blib/man3/TeX::DVI::Parse.3
Manifying blib/man3/TeX::DVI.3
  JANPAZ/TeX-DVI-0.110.tar.gz
  make -- OK
Prepending /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/arch /home/fly1003/var/cpan/build/Font-TFM-0.130-ylYSRq/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/dvi.........
1..6
ok 1
Do new TeX::DVI "t/texput1.out"
ok 2
Fill write the DVI
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
t/dvi_font....
1..6
ok 1
Do new TeX::DVI "t/texput2.out"
ok 2
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
t/parse.......
1..6
ok 1
Do new TeX::DVI::Print("t/parse.dvi")
ok 2
Parse the file
ok 3
Read the output back
ok 4
Read the correct output
ok 5
Compare them
ok 6
ok
All tests successful.
Files=3, Tests=18,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.09 cusr  0.01 csys =  0.13 CPU)
Result: PASS
  JANPAZ/TeX-DVI-0.110.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from lib/TeX/DVI/Parse.pm
<SOFTPKG NAME="TeX-DVI" VERSION="0.110" DATE="2004-12-03">
  <AUTHOR CPAN="JANPAZ">Jan Pazdziora &lt;adelton@fi.muni.cz></AUTHOR>
  <ABSTRACT>parse TeX's DVI output file</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.10"/>
  <CODEBASE HREF="TeX-DVI-0.110.tar.gz"/>
  <PROVIDE NAME="TeX::DVI" VERSION="0.101"/>
  <PROVIDE NAME="TeX::DVI::Parse" VERSION="0.110"/>
  <REQUIRE NAME="Font::TFM" VERSION="0.100"/>
  <!-- Built 2008-08-16 with ActivePerl-1003 on commodore (SuSE Linux 9.2 (x86-64), glibc 2.3.3 (20040917) stable) -->
</SOFTPKG>
>>> (cd /home/fly1003/var/cpan/build/TeX-DVI-0.110-c5qxJn && tar cvf - TeX-DVI-0.110.ppd blib) | gzip -c >/home/fly1003/var/REPO/J/JA/JANPAZ/TeX-DVI-0.110.tar.gz
TeX-DVI-0.110.ppd
blib/
blib/lib/
blib/lib/TeX/
blib/lib/TeX/DVI/
blib/lib/TeX/DVI/Parse.pm
blib/lib/TeX/DVI.pm
blib/man3/
blib/man3/TeX::DVI.3
blib/man3/TeX::DVI::Parse.3
>>> mv /home/fly1003/var/cpan/build/TeX-DVI-0.110-c5qxJn/TeX-DVI-0.110.ppd /home/fly1003/var/REPO/J/JA/JANPAZ
Finished 2008-08-16T04:04:01