Start 2008-12-04T12:04:04
Going to read /home/fly1003/var/cpan/Metadata
Database was generated on Thu, 04 Dec 2008 10:26:55 GMT
Running make for L/LO/LORN/LWP-Curl-0.02.tar.gz
Checksum for /net/nas/data/cpan/authors/id/L/LO/LORN/LWP-Curl-0.02.tar.gz ok
LWP-Curl-0.02/
LWP-Curl-0.02/.cvsignore
LWP-Curl-0.02/Changes
LWP-Curl-0.02/MANIFEST
LWP-Curl-0.02/META.yml
LWP-Curl-0.02/Makefile.PL
LWP-Curl-0.02/README
LWP-Curl-0.02/inc/
LWP-Curl-0.02/inc/Module/
LWP-Curl-0.02/inc/Module/AutoInstall.pm
LWP-Curl-0.02/inc/Module/Install/
LWP-Curl-0.02/inc/Module/Install/AutoInstall.pm
LWP-Curl-0.02/inc/Module/Install/Base.pm
LWP-Curl-0.02/inc/Module/Install/Can.pm
LWP-Curl-0.02/inc/Module/Install/Fetch.pm
LWP-Curl-0.02/inc/Module/Install/Include.pm
LWP-Curl-0.02/inc/Module/Install/Makefile.pm
LWP-Curl-0.02/inc/Module/Install/Metadata.pm
LWP-Curl-0.02/inc/Module/Install/Win32.pm
LWP-Curl-0.02/inc/Module/Install/WriteAll.pm
LWP-Curl-0.02/inc/Module/Install.pm
LWP-Curl-0.02/lib/
LWP-Curl-0.02/lib/LWP/
LWP-Curl-0.02/lib/LWP/Curl.pm
LWP-Curl-0.02/t/
LWP-Curl-0.02/t/00-load.t
LWP-Curl-0.02/t/boilerplate.t
LWP-Curl-0.02/t/get.t
LWP-Curl-0.02/t/pod-coverage.t
LWP-Curl-0.02/t/pod.t
CPAN.pm: Going to build L/LO/LORN/LWP-Curl-0.02.tar.gz
>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Cannot determine perl version info from lib/LWP/Curl.pm
LEGAL WARNING: 'All rights reserved' may invalidate Open Source licenses. Consider removing it. at inc/Module/Install/Metadata.pm line 323.
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Test::More ...loaded. (0.86)
- WWW::Curl ...missing.
- Carp ...loaded. (1.08)
==> Auto-install the 1 mandatory module(s) from CPAN? [Y/n] y
*** Since we're running under CPANPLUS, I'll just let it take care
of the dependency's installation later.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Warning: prerequisite WWW::Curl 0 not found.
Writing Makefile for LWP::Curl
---- Unsatisfied dependencies detected during ----
---- LORN/LWP-Curl-0.02.tar.gz ----
WWW::Curl [requires]
Running make test
Delayed until after prerequisites
Running test for module 'WWW::Curl'
Running make for S/SZ/SZBALINT/WWW-Curl-4.05.tar.gz
Checksum for /net/nas/data/cpan/authors/id/S/SZ/SZBALINT/WWW-Curl-4.05.tar.gz ok
WWW-Curl-4.05/
WWW-Curl-4.05/Changes
WWW-Curl-4.05/Makefile.PL
WWW-Curl-4.05/META.yml
WWW-Curl-4.05/lib/
WWW-Curl-4.05/lib/WWW/
WWW-Curl-4.05/lib/WWW/Curl/
WWW-Curl-4.05/lib/WWW/Curl/Share.pm
WWW-Curl-4.05/lib/WWW/Curl/Easy.pm
WWW-Curl-4.05/lib/WWW/Curl/Multi.pm
WWW-Curl-4.05/lib/WWW/Curl/Form.pm
WWW-Curl-4.05/lib/WWW/Curl.pm
WWW-Curl-4.05/README
WWW-Curl-4.05/SIGNATURE
WWW-Curl-4.05/LICENSE
WWW-Curl-4.05/README.Win32
WWW-Curl-4.05/template/
WWW-Curl-4.05/template/Share.pm.tmpl
WWW-Curl-4.05/template/Easy.pm.tmpl
WWW-Curl-4.05/typemap
WWW-Curl-4.05/inc/
WWW-Curl-4.05/inc/Module/
WWW-Curl-4.05/inc/Module/Install.pm
WWW-Curl-4.05/inc/Module/Install/
WWW-Curl-4.05/inc/Module/Install/External.pm
WWW-Curl-4.05/inc/Module/Install/Metadata.pm
WWW-Curl-4.05/inc/Module/Install/Can.pm
WWW-Curl-4.05/inc/Module/Install/MakeMaker.pm
WWW-Curl-4.05/inc/Module/Install/Base.pm
WWW-Curl-4.05/inc/Module/Install/Makefile.pm
WWW-Curl-4.05/t/
WWW-Curl-4.05/t/new/
WWW-Curl-4.05/t/new/07errbuf.t
WWW-Curl-4.05/t/new/03body-callback.t
WWW-Curl-4.05/t/new/06http-post.t
WWW-Curl-4.05/t/new/10multi-callback.t
WWW-Curl-4.05/t/new/02header-callback.t
WWW-Curl-4.05/t/new/00constants.t
WWW-Curl-4.05/t/new/README
WWW-Curl-4.05/t/new/01basic.t
WWW-Curl-4.05/t/new/08duphandle.t
WWW-Curl-4.05/t/new/05progress.t
WWW-Curl-4.05/t/new/04abort.t
WWW-Curl-4.05/t/new/09duphandle-callback.t
WWW-Curl-4.05/t/13slowleak.t
WWW-Curl-4.05/t/06http-post.t
WWW-Curl-4.05/t/10errbuf.t
WWW-Curl-4.05/t/04abort-test.t
WWW-Curl-4.05/t/00constants.t
WWW-Curl-4.05/t/17slist.t
WWW-Curl-4.05/t/pod.t
WWW-Curl-4.05/t/08ssl.t
WWW-Curl-4.05/t/07ftp-upload.t
WWW-Curl-4.05/t/01basic.t
WWW-Curl-4.05/t/meta.t
WWW-Curl-4.05/t/02callbacks.t
WWW-Curl-4.05/t/05progress.t
WWW-Curl-4.05/t/16formpost.t
WWW-Curl-4.05/t/15duphandle-callback.t
WWW-Curl-4.05/t/14duphandle.t
WWW-Curl-4.05/t/09times.t
WWW-Curl-4.05/t/18twinhandles.t
WWW-Curl-4.05/t/pod-coverage.t
WWW-Curl-4.05/MANIFEST
WWW-Curl-4.05/Curl.xs
CPAN.pm: Going to build S/SZ/SZBALINT/WWW-Curl-4.05.tar.gz
>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Locating required external dependency bin:curl-config... found at /usr/bin/curl-config.
Found curl.h in /usr/include/curl/curl.h
Building curlopt-constants.c for your libcurl version
Building Easy.pm constants for your libcurl version
Building Share.pm constants for your libcurl version
Checking if your kit is complete...
Looks good
Writing Makefile for WWW::Curl
>>> make
cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm
AutoSplitting blib/lib/WWW/Curl/Share.pm (blib/lib/auto/WWW/Curl/Share)
cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm
cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm
cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm
AutoSplitting blib/lib/WWW/Curl/Easy.pm (blib/lib/auto/WWW/Curl/Easy)
cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm
/home/fly1003/ap1003/bin/perl-static "-Iinc" /home/fly1003/var/megalib/ExtUtils/xsubpp -typemap /home/fly1003/ap1003/lib/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c
gcc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -DUSE_SITECUSTOMIZE -DPRIVLIB_LAST_IN_INC -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"4.05\" -DXS_VERSION=\"4.05\" -fPIC "-I/home/fly1003/ap1003/lib/CORE" Curl.c
Running Mkbootstrap for WWW::Curl ()
chmod 644 Curl.bs
rm -f blib/arch/auto/WWW/Curl/Curl.so
LD_RUN_PATH="/usr/lib64:/lib64" gcc -shared -O2 Curl.o -o blib/arch/auto/WWW/Curl/Curl.so \
-lcurl -ldl -lgssapi_krb5 -lkrb5 -lk5crypto -lkrb5support -lcom_err -lresolv -lidn -lssl -lcrypto -lz \
chmod 755 blib/arch/auto/WWW/Curl/Curl.so
cp Curl.bs blib/arch/auto/WWW/Curl/Curl.bs
chmod 644 blib/arch/auto/WWW/Curl/Curl.bs
Manifying blib/man3/WWW::Curl.3
SZBALINT/WWW-Curl-4.05.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00constants.............
1..2
ok 1 - use WWW::Curl::Easy;
ok 2 - Constant loaded ok
ok
t/01basic.................
1..14
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_NOPROGRESS
ok 5 - Setting CURLOPT_FOLLOWLOCATION
ok 6 - Setting CURLOPT_TIMEOUT
ok 7 - Setting CURLOPT_WRITEHEADER
ok 8 - Setting CURLOPT_WRITEDATA
ok 9 - Setting CURLOPT_URL
ok 10 - Setting CURLOPT_HTTPHEADER
ok 11 - Curl return code ok
ok 12 - getinfo returns non-zero number of bytes
ok 13 - getinfo returns CURLINFO_EFFECTIVE_URL
ok 14 - getinfo returns CURLINFO_HTTP_CODE
ok
t/02callbacks.............
1..7
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - CURLOPT_HEADERFUNCTION set
ok 5 - CURLOPT_WRITEFUNCTION set
ok 6 - CURLOPT_HEADERFUNCTION callback was used
ok 7 - CURLOPT_WRITEFUNCTION callback was used
ok
t/04abort-test............
1..8
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_WRITEHEADER
ok 5 - Setting CURLOPT_FILE
ok 6 - Setting CURLOPT_URL
ok 7 - Request fails, Abort succeeds
ok 8 - Abort function was invoked
ok
t/05progress..............
1..16
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_NOPROGRESS
ok 5 - Setting CURLOPT_FOLLOWLOCATION
ok 6 - Setting CURLOPT_TIMEOUT
ok 7 - Setting CURLOPT_WRITEHEADER
ok 8 - Setting CURLOPT_FILE
ok 9 - Setting CURLOPT_URL
ok 10 - Setting CURLOPT_HTTPHEADER
ok 11 - Setting CURLOPT_PROGRESSDATA
ok 12 - Setting CURLOPT_PROGRESSFUNCTION
ok 13 - Turning progress meter back on
ok 14 - Performing perform
ok 15 - Progress callback called
ok 16 - Last downloaded chunk non-zero
ok
t/06http-post.............
1..0 # Skip Not performing http POST/upload tests
skipped: Not performing http POST/upload tests
t/07ftp-upload............
1..0 # Skip Not performing ftp upload tests
skipped: Not performing ftp upload tests
t/08ssl...................
1..21
ok 1 - Curl session initialize returns something
ok 2 - Curl session looks like an object from the WWW::Curl::Easy module
ok 3 - Setting CURLOPT_NOPROGRESS
ok 4 - Setting CURLOPT_FOLLOWLOCATION
ok 5 - Setting CURLOPT_TIMEOUT
ok 6 - Setting CURLOPT_WRITEHEADER
ok 7 - Setting CURLOPT_FILE
ok 8 - https://65.205.248.243/ ssl test succeeds
ok 9 - https://65.205.249.60/ ssl test succeeds
ok 10 - https://www.microsoft.com/ ssl test succeeds
ok 11 - https://www.microsoft.com/ ssl test succeeds
ok 12 - https://www.verisign.com/ ssl test succeeds
ok 13 - https://www.verisign.com/ ssl test succeeds
ok 14 - https://www.verisign.com/ ssl test succeeds
ok 15 - https://www.verisign.com/ ssl test succeeds
ok 16 - https://www.thawte.com/ ssl test succeeds
ok 17 - https://www.thawte.com/ ssl test succeeds
ok 18 - https://www.rapidssl.com/ ssl test succeeds
ok 19 - https://www.rapidssl.com/ ssl test succeeds
ok 20 - https://www.rapidssl.com/ ssl test succeeds
ok 21 - https://www.rapidssl.com/ ssl test succeeds
ok
t/09times.................
1..19
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_NOPROGRESS
ok 5 - Setting CURLOPT_FOLLOWLOCATION
ok 6 - Setting CURLOPT_TIMEOUT
ok 7 - Setting CURLOPT_WRITEHEADER
ok 8 - Setting CURLOPT_FILE
ok 9 - Setting CURLOPT_URL
ok 10 - Setting CURLOPT_HTTPHEADER
ok 11 - Checking perform return code
ok 12 - Non-zero bytesize check
ok 13 - URL definedness check
ok 14 - HTTP status code check
ok 15 - Valid transfer start time
ok 16 - defined total transfer time
ok 17 - NSLOOKUP time is defined
ok 18 - Connect time defined
ok 19 - Pre-transfer time nonzero, defined
ok
t/10errbuf................
1..12
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_NOPROGRESS
ok 5 - Setting CURLOPT_FOLLOWLOCATION
ok 6 - Setting CURLOPT_TIMEOUT
ok 7 - Setting CURLOPT_WRITEHEADER
ok 8 - Setting CURLOPT_FILE
ok 9 - Setting CURLOPT_URL
ok 10 - Setting CURLOPT_STDERR
ok 11 - Setting CURLOPT_URL succeeds, even with a bad protocol
ok 12 - Non-zero return code indicates the expected failure
ok
t/13slowleak..............
1..0 # Skip Not performing slow leakage regression test
skipped: Not performing slow leakage regression test
t/14duphandle.............
1..17
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl session initialize returns something
ok 3 - Curl session looks like an object from the WWW::Curl::Easy module
ok 4 - Setting CURLOPT_NOPROGRESS
ok 5 - Setting CURLOPT_FOLLOWLOCATION
ok 6 - Setting CURLOPT_TIMEOUT
ok 7 - Setting CURLOPT_WRITEHEADER
ok 8 - Setting CURLOPT_FILE
ok 9 - Setting CURLOPT_URL
ok 10 - Setting CURLOPT_HTTPHEADER
ok 11 - Duplicated handle seems to be an object in the right namespace
ok 12 - Perform returns without an error
ok 13 - Perform returns without an error
ok 14 - Survived original curl handle DESTROY
ok 15 - Setting CURLOPT_URL
ok 16 - Perform returns without an error
ok 17 - Survived dup curl handle DESTROY
ok
t/15duphandle-callback....
1..25
ok 1 - Curl session initialize returns something
ok 2 - Curl session looks like an object from the WWW::Curl::Easy module
ok 3 - Setting CURLOPT_NOPROGRESS
ok 4 - Setting CURLOPT_FOLLOWLOCATION
ok 5 - Setting CURLOPT_TIMEOUT
ok 6 - Setting CURLOPT_WRITEHEADER
ok 7 - Setting CURLOPT_FILE
ok 8 - Setting CURLOPT_HTTPHEADER
ok 9 - Setting CURLOPT_WRITEFUNCTION callback
ok 10 - Setting CURLOPT_HEADERFUNCTION callback
ok 11 - Setting CURLOPT_URL
ok 12 - duphandle seems to return something
ok 13 - Dup handle looks like an object from the WWW::Curl::Easy module
ok 14 - Handle return code check
ok 15 - Handle return code check
ok 16 - Header callback seems to have worked
ok 17 - Body callback seems to have worked
ok 18 - Setting CURLOPT_URL
ok 19 - Handle return code check
ok 20 - We survive DESTROY time for the original handle
ok 21 - We can still access the callbacks
ok 22 - duphandle seems to return something again
ok 23 - Dup handle looks like an object from the WWW::Curl::Easy module
ok 24 - Handle return code check
ok 25 - Handle return code check
ok
t/16formpost..............
1..0 # Skip Not performing POST
skipped: Not performing POST
t/17slist.................
1..0 # Skip Not performing printenv cgi tests
skipped: Not performing printenv cgi tests
t/18twinhandles...........
1..11
ok 1 - use WWW::Curl::Easy;
ok 2 - Curl1 session initialize returns something
ok 3 - Curl1 session looks like an object from the WWW::Curl::Easy module
ok 4 - Curl2 session initialize returns something
ok 5 - Curl2 session looks like an object from the WWW::Curl::Easy module
ok 6 - Setting deliberately bad url succeeds - should return error on perform
ok 7 - Setting OK url
ok 8 - Curl1 handle fails as expected
ok 9 - Curl2 handle succeeds
ok 10 - Header callback works
ok 11 - Body callback works
ok
t/meta....................
1..2
ok 1 - META.yml contains valid YAML
ok 2 - META.yml meets the designated specification
ok
t/pod-coverage............
1..1
ok 1 - WWW::Curl has proper POD coverage
ok
t/pod.....................
1..5
ok 1 - blib/lib/WWW/Curl.pm
ok 2 - blib/lib/WWW/Curl/Form.pm
ok 3 - blib/lib/WWW/Curl/Easy.pm
ok 4 - blib/lib/WWW/Curl/Multi.pm
ok 5 - blib/lib/WWW/Curl/Share.pm
ok
All tests successful.
Files=19, Tests=160, 10 wallclock secs ( 0.22 usr 0.09 sys + 1.26 cusr 0.37 csys = 1.94 CPU)
Result: PASS
SZBALINT/WWW-Curl-4.05.tar.gz
make test TEST_VERBOSE=1 -- OK
Balint Szilakszi <szbalint@cpan.org>
Perl extension interface for libcurl
>>> (cd /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK && tar cvf - WWW-Curl-4.05.ppd blib) | gzip -c >/home/fly1003/var/REPO/S/SZ/SZBALINT/WWW-Curl-4.05.tar.gz
WWW-Curl-4.05.ppd
blib/
blib/lib/
blib/lib/auto/
blib/lib/auto/WWW/
blib/lib/auto/WWW/Curl/
blib/lib/auto/WWW/Curl/Easy/
blib/lib/auto/WWW/Curl/Easy/autosplit.ix
blib/lib/auto/WWW/Curl/Share/
blib/lib/auto/WWW/Curl/Share/autosplit.ix
blib/lib/WWW/
blib/lib/WWW/Curl.pm
blib/lib/WWW/Curl/
blib/lib/WWW/Curl/Form.pm
blib/lib/WWW/Curl/Easy.pm
blib/lib/WWW/Curl/Multi.pm
blib/lib/WWW/Curl/Share.pm
blib/arch/
blib/arch/auto/
blib/arch/auto/WWW/
blib/arch/auto/WWW/Curl/
blib/arch/auto/WWW/Curl/Curl.so
blib/arch/auto/WWW/Curl/Curl.bs
blib/man3/
blib/man3/WWW::Curl.3
>>> mv /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/WWW-Curl-4.05.ppd /home/fly1003/var/REPO/S/SZ/SZBALINT
Running make for L/LO/LORN/LWP-Curl-0.02.tar.gz
Prepending /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/arch /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /home/fly1003/var/cpan/build/LWP-Curl-0.02-ZdZImD
Prepending /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/arch /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/lib to PERL5LIB for 'make'
CPAN.pm: Going to build L/LO/LORN/LWP-Curl-0.02.tar.gz
>>> make
/home/fly1003/ap1003/bin/perl-static "-Iinc" Makefile.PL --config= --installdeps=WWW::Curl,0
Cannot determine perl version info from lib/LWP/Curl.pm
LEGAL WARNING: 'All rights reserved' may invalidate Open Source licenses. Consider removing it. at inc/Module/Install/Metadata.pm line 323.
cp lib/LWP/Curl.pm blib/lib/LWP/Curl.pm
Manifying blib/man3/LWP::Curl.3
LORN/LWP-Curl-0.02.tar.gz
make -- OK
Prepending /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/arch /home/fly1003/var/cpan/build/WWW-Curl-4.05-JOmtOK/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
/home/fly1003/ap1003/bin/perl-static "-Iinc" Makefile.PL --config= --installdeps=WWW::Curl,0
Cannot determine perl version info from lib/LWP/Curl.pm
LEGAL WARNING: 'All rights reserved' may invalidate Open Source licenses. Consider removing it. at inc/Module/Install/Metadata.pm line 323.
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/boilerplate.t t/get.t t/pod-coverage.t t/pod.t
t/00-load.........
1..1
ok 1 - use LWP::Curl;
# Testing LWP::Curl 0.02, Perl 5.010000, /home/fly1003/ap1003/bin/perl-static
ok
t/boilerplate.....
1..3
not ok 1 - README contains boilerplate text # TODO Need to replace the boilerplate text
# Failed (TODO) test 'README contains boilerplate text'
# at t/boilerplate.t line 23.
# The README is used... appears on lines 3
# 'version information here' appears on lines 11
not ok 2 - Changes contains boilerplate text # TODO Need to replace the boilerplate text
# Failed (TODO) test 'Changes contains boilerplate text'
# at t/boilerplate.t line 23.
# placeholder date/time appears on lines 3
ok 3 - lib/LWP/Curl.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/get.............
1..1
ok 1
ok
t/pod-coverage....
1..1
ok 1 - Pod coverage on LWP::Curl
ok
t/pod.............
1..1
ok 1 - blib/lib/LWP/Curl.pm
ok
All tests successful.
Test Summary Report
-------------------
t/boilerplate (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 3
Files=5, Tests=7, 1 wallclock secs ( 0.05 usr 0.03 sys + 0.27 cusr 0.08 csys = 0.43 CPU)
Result: PASS
LORN/LWP-Curl-0.02.tar.gz
make test TEST_VERBOSE=1 -- OK
Lindolfo Rodrigues de Oliveira Neto <lorn at perl dot org dot br>
LWP methods implementation with Curl engine
>>> (cd /home/fly1003/var/cpan/build/LWP-Curl-0.02-ZdZImD && tar cvf - LWP-Curl-0.02.ppd blib) | gzip -c >/home/fly1003/var/REPO/L/LO/LORN/LWP-Curl-0.02.tar.gz
LWP-Curl-0.02.ppd
blib/
blib/lib/
blib/lib/LWP/
blib/lib/LWP/Curl.pm
blib/man3/
blib/man3/LWP::Curl.3
>>> mv /home/fly1003/var/cpan/build/LWP-Curl-0.02-ZdZImD/LWP-Curl-0.02.ppd /home/fly1003/var/REPO/L/LO/LORN
Finished 2008-12-04T12:04:22