Start 2008-07-26T06:09:59
Going to read /home/fly1003/var/cpan/Metadata
Database was generated on Fri, 25 Jul 2008 10:02:50 GMT
Running make for S/ST/STEFFENW/DBD-PO-0.03.tar.gz
Checksum for /net/nas/data/cpan/authors/id/S/ST/STEFFENW/DBD-PO-0.03.tar.gz ok
DBD-PO-0.03
DBD-PO-0.03/DBD-PO.ppd
DBD-PO-0.03/Changes
DBD-PO-0.03/MANIFEST
DBD-PO-0.03/META.yml
DBD-PO-0.03/Makefile.PL
DBD-PO-0.03/Build.PL
DBD-PO-0.03/README
DBD-PO-0.03/lib
DBD-PO-0.03/lib/DBD
DBD-PO-0.03/lib/DBD/PO.pm
DBD-PO-0.03/lib/DBD/PO
DBD-PO-0.03/lib/DBD/PO/db.pm
DBD-PO-0.03/lib/DBD/PO/Statement.pm
DBD-PO-0.03/lib/DBD/PO/st.pm
DBD-PO-0.03/lib/DBD/PO/dr.pm
DBD-PO-0.03/lib/DBD/PO/Table.pm
DBD-PO-0.03/lib/DBD/PO/Locale
DBD-PO-0.03/lib/DBD/PO/Locale/PO.pm
DBD-PO-0.03/lib/DBD/PO/Text
DBD-PO-0.03/lib/DBD/PO/Text/PO.pm
DBD-PO-0.03/t
DBD-PO-0.03/t/11_crash.t
DBD-PO-0.03/t/06_obsolete.t
DBD-PO-0.03/t/02_fill_table.t
DBD-PO-0.03/t/07_split_header_msgstr.t
DBD-PO-0.03/t/01_build_table.t
DBD-PO-0.03/t/98_pod.t
DBD-PO-0.03/t/03_check_table.t
DBD-PO-0.03/t/99_pod_coverage.t
DBD-PO-0.03/t/05_change_flags.t
DBD-PO-0.03/t/04_change_table.t
/bin/tar: Read 4096 bytes from -
DBD-PO-0.03/t/08_destroy_table.t
DBD-PO-0.03/t/lib
DBD-PO-0.03/t/lib/DBD_PO_Test_Defaults.pm
CPAN.pm: Going to build S/ST/STEFFENW/DBD-PO-0.03.tar.gz
>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Warning: prerequisite Readonly 0 not found.
Checking if your kit is complete...
Looks good
Warning: prerequisite parent 0 not found.
Writing Makefile for DBD::PO
---- Unsatisfied dependencies detected during ----
---- STEFFENW/DBD-PO-0.03.tar.gz ----
parent [requires]
Readonly [requires]
Running make test
Delayed until after prerequisites
Running test for module 'parent'
Running make for C/CO/CORION/parent-0.221.tar.gz
Checksum for /net/nas/data/cpan/authors/id/C/CO/CORION/parent-0.221.tar.gz ok
parent-0.221/
parent-0.221/t/
parent-0.221/t/compile-time.t
parent-0.221/t/lib/
parent-0.221/t/lib/Dummy/
parent-0.221/t/lib/Dummy/Outside.pm
parent-0.221/t/lib/ReturnsFalse.pm
parent-0.221/t/lib/Dummy2.plugin
parent-0.221/t/lib/Dummy.pm
parent-0.221/t/lib/FileThatOnlyExistsAsPMC.pmc
parent-0.221/t/parent.t
parent-0.221/t/parent-returns-false.t
parent-0.221/t/parent-pmc.t
parent-0.221/t/parent-classfromclassfile.t
parent-0.221/t/parent-classfromfile.t
parent-0.221/t/compile-time-file.t
parent-0.221/Changes
parent-0.221/MANIFEST
parent-0.221/lib/
parent-0.221/lib/parent.pm
parent-0.221/META.yml
parent-0.221/.cvsignore
parent-0.221/Makefile.PL
CPAN.pm: Going to build C/CO/CORION/parent-0.221.tar.gz
>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for parent
>>> make
cp lib/parent.pm blib/lib/parent.pm
Manifying blib/man3/parent.3
CORION/parent-0.221.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/compile-time-file............1..9
ok 1 - The object isa Dummy
ok 2 - Child->can('exclaim')
ok 3 - Inheritance is set up correctly
ok 4 - The object isa Dummy::InlineChild
ok 5 - Child2->can('exclaim')
ok 6 - Inheritance is set up correctly for inlined classes
ok 7 - The object isa Dummy::Outside
ok 8 - Child3->can('exclaim')
ok 9 - Inheritance is set up correctly for classes inherited from via '
ok
t/compile-time.................1..3
ok 1 - Inheritance isa MyParent
ok 2 - Child->can('exclaim')
ok 3 - Inheritance is set up correctly
ok
t/parent-classfromclassfile....1..3
ok 1 - use parent;
ok 2 - Loading an unadorned class works
ok 3 - We loaded Dummy.pm
ok
t/parent-classfromfile.........1..4
ok 1 - use parent;
ok 2 - Loading a class from a file works
ok 3 - We loaded the plugin file
ok 4 - The object isa Dummy2::InlineChild
ok
t/parent-pmc...................1..3
ok 1 - Block ran until the end
ok 2 - No error
ok 3 - FileThatOnlyExistsAsPMC->can('exclaim')
ok
t/parent-returns-false.........1..2
ok 1 - The block did not run to its end.
ok 2 - A module that returns a false value raises an error
ok
t/parent.......................1..10
ok 1 - use parent;
ok 2 - $VERSION gets left alone
ok 3
ok 4
ok 5
ok 6
ok 7 - baseclass that does not exist
ok 8 - still failing on 2nd load
ok 9 - self-inheriting
ok 10 - $VERSION==0 preserved
ok
All tests successful.
Files=7, Tests=34, 1 wallclock secs ( 0.39 cusr + 0.06 csys = 0.45 CPU)
CORION/parent-0.221.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up abstract from lib/parent.pm
Max Maischein <corion@cpan.org>
Establish an ISA relationship with base classes at compile time
>>> (cd /home/fly1003/var/cpan/build/parent-0.221-7b4YPb && tar cvf - parent-0.221.ppd blib) | gzip -c >/home/fly1003/var/REPO/C/CO/CORION/parent-0.221.tar.gz
parent-0.221.ppd
blib/
blib/lib/
blib/lib/parent.pm
blib/man3/
blib/man3/parent.3
>>> mv /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/parent-0.221.ppd /home/fly1003/var/REPO/C/CO/CORION
Running test for module 'Readonly'
Running make for R/RO/ROODE/Readonly-1.03.tar.gz
Prepending /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/R/RO/ROODE/Readonly-1.03.tar.gz ok
Readonly-1.03/
Readonly-1.03/benchmark.pl
Readonly-1.03/Changes
Readonly-1.03/Makefile.PL
Readonly-1.03/MANIFEST
Readonly-1.03/META.yml
Readonly-1.03/README
Readonly-1.03/Readonly.pm
Readonly-1.03/t/
Readonly-1.03/t/array.t
Readonly-1.03/t/deepa.t
Readonly-1.03/t/deeph.t
Readonly-1.03/t/deeps.t
Readonly-1.03/t/docs.t
Readonly-1.03/t/export.t
Readonly-1.03/t/hash.t
Readonly-1.03/t/readonly.t
Readonly-1.03/t/reassign.t
Readonly-1.03/t/scalar.t
Readonly-1.03/t/tie.t
Prepending /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'make'
CPAN.pm: Going to build R/RO/ROODE/Readonly-1.03.tar.gz
>>> /home/fly1003/ap1003/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Readonly
>>> make
cp benchmark.pl blib/lib/benchmark.pl
cp Readonly.pm blib/lib/Readonly.pm
Manifying blib/man3/Readonly.3
ROODE/Readonly-1.03.tar.gz
make -- OK
Prepending /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/array.......1..23
ok 1 - use Readonly;
ok 2 - Create empty global array
ok 3 - Create empty lexical array
ok 4 - Create global array
ok 5 - Fetch global
ok 6 - Fetch global
ok 7 - Fetch global
ok 8 - Global size (zero)
ok 9 - Lexical size (zero)
ok 10 - Global last element (nonzero)
ok 11 - Lexical store
ok 12 - Global store
ok 13 - Change size
ok 14 - Extend
ok 15 - Global exists
ok 16 - Lexical exists
ok 17 - Clear
ok 18 - Push
ok 19 - Unshift
ok 20 - Pop
ok 21 - shift
ok 22 - Splice
ok 23 - Untie
ok
t/deepa.......1..13
ok 1 - use Readonly;
ok 2 - Create a deep reference array
ok 3 - Create a shallow reference array
ok 4 - Modify a1
ok 5 - Modify a2
ok 6 - Deep-modify a1
ok 7 - a1 unchanged
ok 8 - Deep-modify a2
ok 9 - a2 modification successful
ok 10 - Deep-deep modify a1
ok 11 - a1 unchanged
ok 12 - Deep-deep modify a2
ok 13 - a2 mod successful
ok
t/deeph.......1..13
ok 1 - use Readonly;
ok 2 - Create a deep reference array
ok 3 - Create a shallow reference array
ok 4 - Modify h1
ok 5 - Modify h2
ok 6 - Deep-modify h1
ok 7 - h1 unchanged
ok 8 - Deep-modify h2
ok 9 - h2 modification successful
ok 10 - Deep-deep modify h1
ok 11 - h1 unchanged
ok 12 - Deep-deep modify h2
ok 13 - h2 mod successful
ok
t/deeps.......1..21
ok 1 - use Readonly;
ok 2 - Create a shallow reference scalar
ok 3 - Create a deep reference scalar
ok 4 - Create a shallow scalar ref
ok 5 - Create a deep scalar ref
ok 6 - Modify s1
ok 7 - Modify s2
ok 8 - Modify s3
ok 9 - Modify s4
ok 10 - Deep-modify s1
ok 11 - s1 modification successful
ok 12 - Deep-modify s2
ok 13 - s2 modification supposed to fail
ok 14 - Deep-deep modify s1
ok 15 - s1 mod successful
ok 16 - Deep-deep modify s2
ok 17 - s2 mod supposed to fail
ok 18 - Deep-modify s4 should fail
ok 19 - s4 mod should fail
ok 20 - deep s3 mod
ok 21 - deep s3 mod
ok
t/docs........1..22
ok 1 - use Readonly;
ok 2 - A string value
ok 3 - Scalar computed value
ok 4 - Array, with parens
ok 5 - Array, without parens
ok 6 - Array, with qw
ok 7 - Array, with computed values
ok 8 - Empty array 1
ok 9 - Empty array 2
ok 10 - Hash constant
ok 11 - Hash, computed values
ok 12 - Empty hash 1
ok 13 - Empty hash 2
ok 14 - Odd number of values
ok 15 - deep test 1
ok 16 - deep test 1 confirm
ok 17 - deep test 2
ok 18 - deep test 2 confirm
ok 19 - deep test 3
ok 20 - deep test 3 confirm
ok 21 - deep test 4
ok 22 - deep test 4 confirm
ok
t/export......1..1
ok 1 - use Readonly;
ok
t/hash........1..20
ok 1 - use Readonly;
ok 2 - Create global hash
ok 3 - Odd number of values
ok 4 - Create lexical hash
ok 5 - Fetch global
ok 6 - Nonexistent element undefined
ok 7 - Fetch lexical
ok 8 - Store
ok 9 - Delete
ok 10 - Clear
ok 11 - Exists
ok 12 - Doesn't exist
ok 13 - Doesn't exist (no error)
ok 14 - Keys a
ok 15 - Keys b
ok 16 - Values A
ok 17 - Values B
ok 18 - Each C
ok 19 - Each D
ok 20 - Untie
ok
t/readonly....1..19
ok 1 - use Readonly;
ok 2 # skip Readonly \ syntax is for perls earlier than 5.8
ok 3 # skip Readonly \ syntax is for perls earlier than 5.8
ok 4 # skip Readonly \ syntax is for perls earlier than 5.8
ok 5 # skip Readonly \ syntax is for perls earlier than 5.8
ok 6 # skip Readonly \ syntax is for perls earlier than 5.8
ok 7 # skip Readonly \ syntax is for perls earlier than 5.8
ok 8 # skip Readonly \ syntax is for perls earlier than 5.8
ok 9 # skip Readonly \ syntax is for perls earlier than 5.8
ok 10 # skip Readonly \ syntax is for perls earlier than 5.8
ok 11 - Create scalar
ok 12 - Modify scalar
ok 13 - Create array
ok 14 - Modify array
ok 15 - Create hash (list)
ok 16 - Odd number of values
ok 17 - Modify hash
ok 18 - Create hash (hashref)
ok 19 - Modify hash
ok
9/19 skipped: various reasons
t/reassign....1..22
ok 1 - use Readonly;
ok 2 - Readonly::Scalar reassign die
ok 3 - Readonly::Scalar reassign no effect
ok 4 - Readonly::Array reassign die
ok 5 - Readonly::Array reassign no effect
ok 6 - Readonly::Hash reassign die
ok 7 - Readonly::Hash reassign no effect
ok 8 # skip Readonly \ syntax is for perls earlier than 5.8
ok 9 # skip Readonly \ syntax is for perls earlier than 5.8
ok 10 # skip Readonly \ syntax is for perls earlier than 5.8
ok 11 # skip Readonly \ syntax is for perls earlier than 5.8
ok 12 # skip Readonly \ syntax is for perls earlier than 5.8
ok 13 # skip Readonly \ syntax is for perls earlier than 5.8
ok 14 # skip Readonly \ syntax is for perls earlier than 5.8
ok 15 - Readonly Scalar reassign die
ok 16 - Readonly Scalar reassign no effect
ok 17 - Readonly Array reassign die
ok 18 - Readonly Array reassign no effect
ok 19 - Readonly Hash reassign die
ok 20 - Readonly Hash reassign no effect
ok 21 - Reassign real string
ok 22 - Reassign real number
ok
7/22 skipped: various reasons
t/scalar......1..12
ok 1 - use Readonly;
ok 2 - Create a global scalar
ok 3 - Create a lexical scalar
ok 4 - Create an undef global scalar
ok 5 - Try w/o args
ok 6 - Fetch global
ok 7 - Fetch lexical
ok 8 - Fetch undef global
ok 9 - Fetch undef lexical
ok 10 - Error setting global
ok 11 - Readonly global value unchanged
ok 12 - Untie
ok
t/tie.........1..4
ok 1 - use Readonly;
ok 2 - Direct scalar tie
ok 3 - Direct array tie
ok 4 - Direct hash tie
ok
All tests successful, 16 subtests skipped.
Files=11, Tests=170, 1 wallclock secs ( 0.87 cusr + 0.11 csys = 0.98 CPU)
ROODE/Readonly-1.03.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up abstract from Makefile
Eric J. Roode <eric.roode.cpan@gmail.com>
Facility for creating read-only scalars, arrays, hashes.
>>> (cd /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA && tar cvf - Readonly-1.03.ppd blib) | gzip -c >/home/fly1003/var/REPO/R/RO/ROODE/Readonly-1.03.tar.gz
Readonly-1.03.ppd
blib/
blib/lib/
blib/lib/benchmark.pl
blib/lib/Readonly.pm
blib/man3/
blib/man3/Readonly.3
>>> mv /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/Readonly-1.03.ppd /home/fly1003/var/REPO/R/RO/ROODE
Running make for S/ST/STEFFENW/DBD-PO-0.03.tar.gz
Prepending /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/arch /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/lib /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /home/fly1003/var/cpan/build/DBD-PO-0.03-nj0mGj
Prepending /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/arch /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/lib /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'make'
CPAN.pm: Going to build S/ST/STEFFENW/DBD-PO-0.03.tar.gz
>>> make
cp lib/DBD/PO/db.pm blib/lib/DBD/PO/db.pm
cp lib/DBD/PO/Text/PO.pm blib/lib/DBD/PO/Text/PO.pm
cp lib/DBD/PO/Locale/PO.pm blib/lib/DBD/PO/Locale/PO.pm
cp lib/DBD/PO/dr.pm blib/lib/DBD/PO/dr.pm
cp lib/DBD/PO.pm blib/lib/DBD/PO.pm
cp lib/DBD/PO/Statement.pm blib/lib/DBD/PO/Statement.pm
cp lib/DBD/PO/st.pm blib/lib/DBD/PO/st.pm
cp lib/DBD/PO/Table.pm blib/lib/DBD/PO/Table.pm
Manifying blib/man3/DBD::PO::Locale::PO.3
Manifying blib/man3/DBD::PO::Text::PO.3
Manifying blib/man3/DBD::PO::db.3
Manifying blib/man3/DBD::PO::dr.3
Manifying blib/man3/DBD::PO.3
Manifying blib/man3/DBD::PO::Statement.3
Manifying blib/man3/DBD::PO::st.3
Manifying blib/man3/DBD::PO::Table.3
STEFFENW/DBD-PO-0.03.tar.gz
make -- OK
Prepending /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/arch /home/fly1003/var/cpan/build/Readonly-1.03-O3enkA/blib/lib /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/arch /home/fly1003/var/cpan/build/parent-0.221-7b4YPb/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1003/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01_build_table............1..6
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - create table
ok 4 - table file found
ok 5 - insert header
ok 6 - check po file
ok
t/02_fill_table.............1..10
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - prepare insert isa DBI::st
ok 4 - insert full row
ok 5 - insert full row, all are arrays
ok 6 - insert minimized row
ok 7 - prepare insert isa DBI::st
ok 8 - insert row 1
ok 9 - insert row 2
ok 10 - check po file
ok
t/03_check_table............1..8
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - The object isa DBI::st
ok 4 - execute: id_2
ok 5 - fetch result: id_2
ok 6 - execute: id_value1${separator}id_value2
ok 7 - fetch result: id_value1${separator}id_value2
ok 8 - check po file
ok
t/04_change_table...........1..7
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - update row 1
ok 4 - prepare isa DBI::st
ok 5 - execute
ok 6 - fetch result
ok 7 - check po file
ok
t/05_change_flags...........1..42
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - prepare update header isa DBI::st
ok 4 - prepare select header isa DBI::st
ok 5 - update: header fuzzy=1
ok 6 - select: header fuzzy=1
ok 7 - fetch result: header fuzzy=1
ok 8 - check po file: header fuzzy=1
ok 9 - update: header fuzzy=0
ok 10 - select: header fuzzy=0
ok 11 - fetch result: header fuzzy=0
ok 12 - check po file: header fuzzy=0
ok 13 - The object isa DBI::st
ok 14 - The object isa DBI::st
ok 15 - update: fuzzy=1
ok 16 - select: fuzzy=1
ok 17 - fetch result: fuzzy=1
ok 18 - check po file: fuzzy=1
ok 19 - update: c-format=1
ok 20 - select: c-format=1
ok 21 - fetch result: c-format=1
ok 22 - check po file: c-format=1
ok 23 - update: php-format=1
ok 24 - select: php-format=1
ok 25 - fetch result: php-format=1
ok 26 - check po file: php-format=1
ok 27 - update: c-format=-1
ok 28 - select: c-format=-1
ok 29 - fetch result: c-format=-1
ok 30 - check po file: c-format=-1
ok 31 - update: php-format=-1
ok 32 - select: php-format=-1
ok 33 - fetch result: php-format=-1
ok 34 - check po file: php-format=-1
ok 35 - update: all=1
ok 36 - select: all=1
ok 37 - fetch result: all=1
ok 38 - check po file: all=1
ok 39 - update: all=0
ok 40 - select: all=0
ok 41 - fetch result: all=0
ok 42 - check po file: all=0
ok
t/06_obsolete...............1..12
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - prepare update isa DBI::st
ok 4 - prepare select isa DBI::st
ok 5 - update: obsolete=1
ok 6 - select: obsolete=1
ok 7 - fetch result: obsolete=1
ok 8 - check po file
ok 9 - update: obsolete=0
ok 10 - select: obsolete=0
ok 11 - fetch result: obsolete=0
ok 12 - check po file
ok
t/07_split_header_msgstr....1..5
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - prepare isa DBI::st
ok 4 - execute
ok 5 - split header msgstr
ok
t/08_destroy_table..........1..4
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - drop table
ok 4 - table file deleted
ok
t/11_crash..................1..8
ok 1 - use DBI;
ok 2 - connect isa DBI::db
ok 3 - create table
ok 4 - table file found
ok 5 - change header and line
ok 6 - change id to undef
ok 7 - drop table
ok 8 - table file deleted
ok
t/98_pod....................1..8
ok 1 - blib/lib/DBD/PO.pm
ok 2 - blib/lib/DBD/PO/db.pm
ok 3 - blib/lib/DBD/PO/dr.pm
ok 4 - blib/lib/DBD/PO/st.pm
ok 5 - blib/lib/DBD/PO/Table.pm
ok 6 - blib/lib/DBD/PO/Statement.pm
ok 7 - blib/lib/DBD/PO/Text/PO.pm
ok 8 - blib/lib/DBD/PO/Locale/PO.pm
ok
t/99_pod_coverage...........1..8
ok 1 - Pod coverage on DBD::PO
ok 2 - Pod coverage on DBD::PO::db
ok 3 - Pod coverage on DBD::PO::dr
ok 4 - Pod coverage on DBD::PO::st
ok 5 - Pod coverage on DBD::PO::Table
ok 6 - Pod coverage on DBD::PO::Statement
ok 7 - Pod coverage on DBD::PO::Text::PO
ok 8 - Pod coverage on DBD::PO::Locale::PO
ok
All tests successful.
Files=11, Tests=118, 5 wallclock secs ( 4.25 cusr + 0.44 csys = 4.69 CPU)
STEFFENW/DBD-PO-0.03.tar.gz
make test TEST_VERBOSE=1 -- OK
Steffen Winkler <cpan@steffen-winkler.de>
DBD::PO - DBI driver for PO files
>>> (cd /home/fly1003/var/cpan/build/DBD-PO-0.03-nj0mGj && tar cvf - DBD-PO-0.03.ppd blib) | gzip -c >/home/fly1003/var/REPO/S/ST/STEFFENW/DBD-PO-0.03.tar.gz
DBD-PO-0.03.ppd
blib/
blib/lib/
blib/lib/DBD/
blib/lib/DBD/PO/
blib/lib/DBD/PO/Text/
blib/lib/DBD/PO/Text/PO.pm
blib/lib/DBD/PO/db.pm
blib/lib/DBD/PO/dr.pm
blib/lib/DBD/PO/st.pm
blib/lib/DBD/PO/Locale/
blib/lib/DBD/PO/Locale/PO.pm
blib/lib/DBD/PO/Table.pm
blib/lib/DBD/PO/Statement.pm
blib/lib/DBD/PO.pm
blib/man3/
blib/man3/DBD::PO::Statement.3
blib/man3/DBD::PO::Table.3
blib/man3/DBD::PO::Text::PO.3
blib/man3/DBD::PO.3
blib/man3/DBD::PO::Locale::PO.3
blib/man3/DBD::PO::db.3
blib/man3/DBD::PO::dr.3
blib/man3/DBD::PO::st.3
>>> mv /home/fly1003/var/cpan/build/DBD-PO-0.03-nj0mGj/DBD-PO-0.03.ppd /home/fly1003/var/REPO/S/ST/STEFFENW
Finished 2008-07-26T06:10:17