PATH=/usr/bin:/bin:/home/fly1600/var/megalib/bin
Start 2014-11-20T02:04:27
ActivePerl-1600 CPAN-2.00
Reading '/home/fly1600/var/cpan/Metadata'
  Database was generated on Thu, 20 Nov 2014 09:17:02 GMT
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/CHECKSUMS
Checksum for /home/fly1600/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz ok
Perinci-CmdLine-Lite-0.50/
Perinci-CmdLine-Lite-0.50/Changes
Perinci-CmdLine-Lite-0.50/LICENSE
Perinci-CmdLine-Lite-0.50/MANIFEST
Perinci-CmdLine-Lite-0.50/lib/
Perinci-CmdLine-Lite-0.50/lib/Test/
Perinci-CmdLine-Lite-0.50/lib/Test/Perinci/
Perinci-CmdLine-Lite-0.50/lib/Test/Perinci/CmdLine.pm
Perinci-CmdLine-Lite-0.50/lib/Perinci/
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Manual.pod
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Manual/
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Manual/Examples.pod
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Manual/FAQ.pod
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Base.pm
Perinci-CmdLine-Lite-0.50/lib/Perinci/CmdLine/Lite.pm
Perinci-CmdLine-Lite-0.50/README
Perinci-CmdLine-Lite-0.50/META.json
Perinci-CmdLine-Lite-0.50/Makefile.PL
Perinci-CmdLine-Lite-0.50/dist.ini
Perinci-CmdLine-Lite-0.50/t/
Perinci-CmdLine-Lite-0.50/t/release-rinci.t
Perinci-CmdLine-Lite-0.50/t/complete.t
Perinci-CmdLine-Lite-0.50/t/release-pod-coverage.t
Perinci-CmdLine-Lite-0.50/t/00-compile.t
Perinci-CmdLine-Lite-0.50/t/01-embed.t
Perinci-CmdLine-Lite-0.50/t/run.t
Perinci-CmdLine-Lite-0.50/t/release-pod-syntax.t
Perinci-CmdLine-Lite-0.50/weaver.ini
Perinci-CmdLine-Lite-0.50/META.yml

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz

>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::To::CLIOptSpec 0.01 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::CmdLine::Lite
Writing MYMETA.yml and MYMETA.json
----  Unsatisfied dependencies detected during  ----
---- PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz ----
    Perinci::Sub::To::CLIOptSpec [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Perinci::Sub::To::CLIOptSpec'
Running make for P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
Checksum for /home/fly1600/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz ok
Perinci-Sub-To-CLIOptSpec-0.01/
Perinci-Sub-To-CLIOptSpec-0.01/Changes
Perinci-Sub-To-CLIOptSpec-0.01/LICENSE
Perinci-Sub-To-CLIOptSpec-0.01/MANIFEST
Perinci-Sub-To-CLIOptSpec-0.01/lib/
Perinci-Sub-To-CLIOptSpec-0.01/lib/Perinci/
Perinci-Sub-To-CLIOptSpec-0.01/lib/Perinci/Sub/
Perinci-Sub-To-CLIOptSpec-0.01/lib/Perinci/Sub/To/
Perinci-Sub-To-CLIOptSpec-0.01/lib/Perinci/Sub/To/CLIOptSpec.pm
Perinci-Sub-To-CLIOptSpec-0.01/README
Perinci-Sub-To-CLIOptSpec-0.01/META.json
Perinci-Sub-To-CLIOptSpec-0.01/Makefile.PL
Perinci-Sub-To-CLIOptSpec-0.01/dist.ini
Perinci-Sub-To-CLIOptSpec-0.01/t/
Perinci-Sub-To-CLIOptSpec-0.01/t/release-rinci.t
Perinci-Sub-To-CLIOptSpec-0.01/t/release-pod-coverage.t
Perinci-Sub-To-CLIOptSpec-0.01/t/00-compile.t
Perinci-Sub-To-CLIOptSpec-0.01/t/release-pod-syntax.t
Perinci-Sub-To-CLIOptSpec-0.01/weaver.ini
Perinci-Sub-To-CLIOptSpec-0.01/META.yml

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz

>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::GetArgs::Argv 0.59 not found. We have 0.58.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::To::CLIOptSpec
Writing MYMETA.yml and MYMETA.json
----     Unsatisfied dependencies detected during    ----
---- PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz ----
    Perinci::Examples::CLI [build_requires]
    Perinci::Sub::GetArgs::Argv [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Perinci::Examples::CLI'
Running make for P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz
Checksum for /home/fly1600/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz ok
Perinci-Examples-0.42/
Perinci-Examples-0.42/Changes
Perinci-Examples-0.42/LICENSE
Perinci-Examples-0.42/MANIFEST
Perinci-Examples-0.42/lib/
Perinci-Examples-0.42/lib/Perinci/
Perinci-Examples-0.42/lib/Perinci/Examples/
Perinci-Examples-0.42/lib/Perinci/Examples/Tx.pm
Perinci-Examples-0.42/lib/Perinci/Examples/NoMeta.pm
Perinci-Examples-0.42/lib/Perinci/Examples/SubMeta.pm
Perinci-Examples-0.42/lib/Perinci/Examples/FileStream.pm
Perinci-Examples-0.42/lib/Perinci/Examples/CmdLineSrc.pm
Perinci-Examples-0.42/lib/Perinci/Examples/FilePartial.pm
Perinci-Examples-0.42/lib/Perinci/Examples/CLI.pm
Perinci-Examples-0.42/lib/Perinci/Examples/CmdLineResMeta.pm
Perinci-Examples-0.42/lib/Perinci/Examples/Completion.pm
Perinci-Examples-0.42/lib/Perinci/Examples.pm
Perinci-Examples-0.42/README
Perinci-Examples-0.42/META.json
Perinci-Examples-0.42/Makefile.PL
Perinci-Examples-0.42/dist.ini
Perinci-Examples-0.42/t/
Perinci-Examples-0.42/t/release-rinci.t
Perinci-Examples-0.42/t/release-pod-coverage.t
Perinci-Examples-0.42/t/00-compile.t
Perinci-Examples-0.42/t/release-pod-syntax.t
Perinci-Examples-0.42/weaver.ini
Perinci-Examples-0.42/META.yml

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz

>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::Util 0.38 not found. We have 0.37.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Examples
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
----  PERLANCAR/Perinci-Examples-0.42.tar.gz  ----
    Perinci::Sub::Util [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Perinci::Sub::Util'
Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
Checksum for /home/fly1600/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz ok
Perinci-Sub-Util-0.40/
Perinci-Sub-Util-0.40/Changes
Perinci-Sub-Util-0.40/LICENSE
Perinci-Sub-Util-0.40/MANIFEST
Perinci-Sub-Util-0.40/lib/
Perinci-Sub-Util-0.40/lib/Perinci/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ResObj.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/Sort.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util.pm
Perinci-Sub-Util-0.40/README
Perinci-Sub-Util-0.40/META.json
Perinci-Sub-Util-0.40/Makefile.PL
Perinci-Sub-Util-0.40/dist.ini
Perinci-Sub-Util-0.40/t/
Perinci-Sub-Util-0.40/t/release-rinci.t
Perinci-Sub-Util-0.40/t/release-pod-coverage.t
Perinci-Sub-Util-0.40/t/caller.t
Perinci-Sub-Util-0.40/t/00-compile.t
Perinci-Sub-Util-0.40/t/gen_modified_sub.t
Perinci-Sub-Util-0.40/t/err.t
Perinci-Sub-Util-0.40/t/release-pod-syntax.t
Perinci-Sub-Util-0.40/weaver.ini
Perinci-Sub-Util-0.40/META.yml

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz

>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Util
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm
cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm
cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm
Manifying 3 pod documents
  PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..3
ok 1 - Perinci/Sub/Util.pm loaded ok
ok 2 - Perinci/Sub/Util/ResObj.pm loaded ok
ok 3 - Perinci/Sub/Util/Sort.pm loaded ok
ok
t/caller.t ................ 
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
1..6
ok
t/err.t ................... 
    # Subtest: defaults
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 500
    ok 5 - message
    ok 6 - result
    ok 7 - result metadata is hash
    1..7
ok 1 - defaults
    # Subtest: set status
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 400
    1..4
ok 2 - set status
    # Subtest: set message
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 500
    ok 5 - message
    1..5
ok 3 - set message
    # Subtest: set prev
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 400
    ok 5 - message
    ok 6 - prev
    1..6
ok 4 - set prev
    # Subtest: caller
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 500
    ok 5 - message
    ok 6 - log[0] type
    ok 7 - log[0] time
    ok 8 - log[0] package
    ok 9 - log[0] func
    ok 10 - log[0] line
    1..10
ok 5 - caller
    # Subtest: stack_trace
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 500
    ok 5 - stack_trace
    1..5
ok 6 - stack_trace
    # Subtest: stack_trace only produced once
    ok 1 - func doesn't die
    ok 2 - result is defined
    ok 3 - result is an array
    ok 4 - status is 501
    ok 5 - stack_trace
    1..5
ok 7 - stack_trace only produced once
1..7
ok
t/gen_modified_sub.t ...... 
ok 1
ok 2
1..2
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=18,  1 wallclock secs ( 0.05 usr  0.02 sys +  0.35 cusr  0.06 csys =  0.48 CPU)
Result: PASS
  PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
  make test TEST_VERBOSE=1 -- OK
PPD for Perinci-Sub-Util-0.40 already made
Running make for P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz

>>> make
cp lib/Perinci/Examples/NoMeta.pm blib/lib/Perinci/Examples/NoMeta.pm
cp lib/Perinci/Examples/SubMeta.pm blib/lib/Perinci/Examples/SubMeta.pm
cp lib/Perinci/Examples/Completion.pm blib/lib/Perinci/Examples/Completion.pm
cp lib/Perinci/Examples/CmdLineSrc.pm blib/lib/Perinci/Examples/CmdLineSrc.pm
cp lib/Perinci/Examples/FileStream.pm blib/lib/Perinci/Examples/FileStream.pm
cp lib/Perinci/Examples/Tx.pm blib/lib/Perinci/Examples/Tx.pm
cp lib/Perinci/Examples/FilePartial.pm blib/lib/Perinci/Examples/FilePartial.pm
cp lib/Perinci/Examples/CLI.pm blib/lib/Perinci/Examples/CLI.pm
cp lib/Perinci/Examples/CmdLineResMeta.pm blib/lib/Perinci/Examples/CmdLineResMeta.pm
cp lib/Perinci/Examples.pm blib/lib/Perinci/Examples.pm
Manifying 10 pod documents
  PERLANCAR/Perinci-Examples-0.42.tar.gz
  make -- OK
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..10
ok 1 - Perinci/Examples.pm loaded ok
ok 2 - Perinci/Examples/CLI.pm loaded ok
ok 3 - Perinci/Examples/CmdLineResMeta.pm loaded ok
ok 4 - Perinci/Examples/CmdLineSrc.pm loaded ok
ok 5 - Perinci/Examples/Completion.pm loaded ok
ok 6 - Perinci/Examples/FilePartial.pm loaded ok
ok 7 - Perinci/Examples/FileStream.pm loaded ok
ok 8 - Perinci/Examples/NoMeta.pm loaded ok
ok 9 - Perinci/Examples/SubMeta.pm loaded ok
ok 10 - Perinci/Examples/Tx.pm loaded ok
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=10,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.36 cusr  0.05 csys =  0.45 CPU)
Result: PASS
  PERLANCAR/Perinci-Examples-0.42.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Perinci-Examples" VERSION="0.42" DATE="2014-11-20">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Example modules containing metadata and various example functions</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Perinci-Examples-0.42.tar.gz"/>
  <PROVIDE NAME="Perinci::Examples" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::NoMeta" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::SubMeta" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::Completion" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::CmdLineSrc" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::FileStream" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::Tx" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::FilePartial" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::CLI" VERSION="0.42"/>
  <PROVIDE NAME="Perinci::Examples::CmdLineResMeta" VERSION="0.42"/>
  <REQUIRE NAME="Log::Any"/>
  <REQUIRE NAME="Perinci::Object" VERSION="0.18"/>
  <REQUIRE NAME="Perinci::Sub::Util" VERSION="0.38"/>
  <REQUIRE NAME="Rinci::" VERSION="1.001069"/>
  <REQUIRE NAME="experimental::"/>
  <!-- Built 2014-11-20 with ActivePerl-1600 on cpanfly-linux-x64.activestate.com (Fedora Core release 5 (Bordeaux), glibc 2.4 development) log Perinci-CmdLine-Lite-0.50.d/log-20141120T020427.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o && tar cvf - Perinci-Examples-0.42.ppd blib) | gzip -c >/home/fly1600/var/REPO/P/PE/PERLANCAR/Perinci-Examples-0.42.tar.gz
Perinci-Examples-0.42.ppd
blib/
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/Examples/
blib/lib/Perinci/Examples/NoMeta.pm
blib/lib/Perinci/Examples/SubMeta.pm
blib/lib/Perinci/Examples/Completion.pm
blib/lib/Perinci/Examples/CmdLineSrc.pm
blib/lib/Perinci/Examples/FileStream.pm
blib/lib/Perinci/Examples/Tx.pm
blib/lib/Perinci/Examples/FilePartial.pm
blib/lib/Perinci/Examples/CLI.pm
blib/lib/Perinci/Examples/CmdLineResMeta.pm
blib/lib/Perinci/Examples.pm
blib/man3/
blib/man3/Perinci::Examples.3
blib/man3/Perinci::Examples::CLI.3
blib/man3/Perinci::Examples::CmdLineResMeta.3
blib/man3/Perinci::Examples::CmdLineSrc.3
blib/man3/Perinci::Examples::Completion.3
blib/man3/Perinci::Examples::FilePartial.3
blib/man3/Perinci::Examples::FileStream.3
blib/man3/Perinci::Examples::NoMeta.3
blib/man3/Perinci::Examples::SubMeta.3
blib/man3/Perinci::Examples::Tx.3
>>> mv /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/Perinci-Examples-0.42.ppd /home/fly1600/var/REPO/P/PE/PERLANCAR
Running test for module 'Perinci::Sub::GetArgs::Argv'
Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz
Prepending /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz
Checksum for /home/fly1600/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz ok
Perinci-Sub-GetArgs-Argv-0.59/
Perinci-Sub-GetArgs-Argv-0.59/Changes
Perinci-Sub-GetArgs-Argv-0.59/LICENSE
Perinci-Sub-GetArgs-Argv-0.59/MANIFEST
Perinci-Sub-GetArgs-Argv-0.59/lib/
Perinci-Sub-GetArgs-Argv-0.59/lib/Perinci/
Perinci-Sub-GetArgs-Argv-0.59/lib/Perinci/Sub/
Perinci-Sub-GetArgs-Argv-0.59/lib/Perinci/Sub/GetArgs/
Perinci-Sub-GetArgs-Argv-0.59/lib/Perinci/Sub/GetArgs/Argv.pm
Perinci-Sub-GetArgs-Argv-0.59/README
Perinci-Sub-GetArgs-Argv-0.59/META.json
Perinci-Sub-GetArgs-Argv-0.59/Makefile.PL
Perinci-Sub-GetArgs-Argv-0.59/dist.ini
Perinci-Sub-GetArgs-Argv-0.59/t/
Perinci-Sub-GetArgs-Argv-0.59/t/release-rinci.t
Perinci-Sub-GetArgs-Argv-0.59/t/get_args_from_argv.t
Perinci-Sub-GetArgs-Argv-0.59/t/release-pod-coverage.t
Perinci-Sub-GetArgs-Argv-0.59/t/gen_getopt_long_spec_from_meta.t
Perinci-Sub-GetArgs-Argv-0.59/t/00-compile.t
Perinci-Sub-GetArgs-Argv-0.59/t/release-pod-syntax.t
Perinci-Sub-GetArgs-Argv-0.59/weaver.ini
Perinci-Sub-GetArgs-Argv-0.59/META.yml
Prepending /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz

>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::GetArgs::Argv
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Perinci/Sub/GetArgs/Argv.pm blib/lib/Perinci/Sub/GetArgs/Argv.pm
Manifying 1 pod document
  PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz
  make -- OK
Prepending /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...................... 
1..1
ok 1 - Perinci/Sub/GetArgs/Argv.pm loaded ok
ok
t/gen_getopt_long_spec_from_meta.t .. 
ok 1
1..1
ok
Unknown option: foo
Invalid YAML/JSON in arg 'arg5' at /data/fly1600/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib/Perinci/Sub/GetArgs/Argv.pm line 211.
Failed trying to parse argv #0 as JSON: 'false' expected, at character offset 1 (before "foo]") at /data/fly1600/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib/Perinci/Sub/GetArgs/Argv.pm line 47.
Failed trying to parse argv #0 as JSON: 'false' expected, at character offset 1 (before "foo]") at /data/fly1600/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib/Perinci/Sub/GetArgs/Argv.pm line 47.
Unknown option: arg2
Unknown option: foo_bar_baz
Unknown option: foo-bar_baz
Unknown option: foo-yaml
Unknown option: foo-json
Unknown option: nofalse
t/get_args_from_argv.t .............. 
    # Subtest: optional missing = ok
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 1 - optional missing = ok
    # Subtest: optional given = ok
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 2 - optional given = ok
    # Subtest: arg_pos
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - remaining argv
    1..3
ok 3 - arg_pos
    # Subtest: mixed arg_pos with opts (1)
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - remaining argv
    1..3
ok 4 - mixed arg_pos with opts (1)
    # Subtest: mixed arg_pos with opts (2)
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - remaining argv
    1..3
ok 5 - mixed arg_pos with opts (2)
    # Subtest: mixed arg_pos with opts (clash)
    ok 1 - error (status != 200)
    1..1
ok 6 - mixed arg_pos with opts (clash)
    # Subtest: extra args given = fails (1)
    ok 1 - error (status != 200)
    1..1
ok 7 - extra args given = fails (1)
    # Subtest: extra args given = fails (2)
    ok 1 - error (status != 200)
    1..1
ok 8 - extra args given = fails (2)
    # Subtest: unknown args given = fails
    ok 1 - error (status != 200)
    1..1
ok 9 - unknown args given = fails
    # Subtest: json parsing, done on nonscalars
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 10 - json parsing, done on nonscalars
    # Subtest: json true/false
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 11 - json true/false
    # Subtest: yaml parsing, done on nonscalars
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 12 - yaml parsing, done on nonscalars
    # Subtest: yaml+json syntax error
    ok 1 - error (status != 200)
    1..1
ok 13 - yaml+json syntax error
    # Subtest: nonscalar argv, yaml/json parsing
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 14 - nonscalar argv, yaml/json parsing
    # Subtest: nonscalar argv, yaml/json parsing, greedy
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 15 - nonscalar argv, yaml/json parsing, greedy
    # Subtest: opt: common_opts
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - extra is parsed
    ok 4 - extra2 is parsed
    1..4
ok 16 - opt: common_opts
    # Subtest: opt: common_opts (clash with arg)
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - arg1 is processed
    ok 4 - arg2 is processed
    1..4
ok 17 - opt: common_opts (clash with arg)
    # Subtest: opt: strict=1
    ok 1 - error (status != 200)
    1..1
ok 18 - opt: strict=1
    # Subtest: opt: strict=0
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 19 - opt: strict=0
    # Subtest: missing required args
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3
    1..3
ok 20 - missing required args
    # Subtest: underscore becomes dash (1)
    ok 1 - error (status != 200)
    1..1
ok 21 - underscore becomes dash (1)
    # Subtest: underscore becomes dash (2)
    ok 1 - error (status != 200)
    1..1
ok 22 - underscore becomes dash (2)
    # Subtest: underscore becomes dash (3)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 23 - underscore becomes dash (3)
    # Subtest: per_arg_yaml=0
    ok 1 - error (status != 200)
    1..1
ok 24 - per_arg_yaml=0
    # Subtest: per_arg_yaml=1
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 25 - per_arg_yaml=1
    # Subtest: per_arg_json=0
    ok 1 - error (status != 200)
    1..1
ok 26 - per_arg_json=0
    # Subtest: per_arg_json=1
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 27 - per_arg_json=1
    # Subtest: argv defaults to @ARGV
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 28 - argv defaults to @ARGV
    # Subtest: one-letter args get -X as well as --X
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 29 - one-letter args get -X as well as --X
    # Subtest: bool args with length > 1 get --XXX as well as --noXXX
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 30 - bool args with length > 1 get --XXX as well as --noXXX
    # Subtest: cmdline_aliases: S
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 31 - cmdline_aliases: S
    # Subtest: cmdline_aliases: S_foo
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 32 - cmdline_aliases: S_foo
    # Subtest: cmdline_aliases: bool alias with code does not get --noX
        # Subtest: getargs(--true)
        ok 1 - success (status == 200)
        1..1
    ok 1 - getargs(--true)
        # Subtest: getargs(--notrue)
        ok 1 - success (status == 200)
        1..1
    ok 2 - getargs(--notrue)
        # Subtest: getargs(--false)
        ok 1 - success (status == 200)
        1..1
    ok 3 - getargs(--false)
        # Subtest: getargs(--nofalse)
        ok 1 - error (status != 200)
        1..1
    ok 4 - getargs(--nofalse)
    1..4
ok 33 - cmdline_aliases: bool alias with code does not get --noX
    # Subtest: array of scalar (int, 1)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 34 - array of scalar (int, 1)
    # Subtest: array of scalar (int, 2)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 35 - array of scalar (int, 2)
    # Subtest: array of scalar (str, 1)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 36 - array of scalar (str, 1)
    # Subtest: array of scalar (str, 2)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 37 - array of scalar (str, 2)
    # Subtest: array of scalar (str, one-letter alias, 1)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 38 - array of scalar (str, one-letter alias, 1)
    # Subtest: array of scalar (str, one-letter alias, 2)
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 39 - array of scalar (str, one-letter alias, 2)
    # Subtest: with.dot accepted via --with-dot
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 40 - with.dot accepted via --with-dot
    # Subtest: allow_extra_elems=>0
    ok 1 - error (status != 200)
    1..1
ok 41 - allow_extra_elems=>0
    # Subtest: allow_extra_elems=>1
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3 - argv
    1..3
ok 42 - allow_extra_elems=>1
    # Subtest: without on_missing_required_args hook
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3
    1..3
ok 43 - without on_missing_required_args hook
    # Subtest: returning 1 from on_missing_required_args hook
    ok 1 - success (status == 200)
    ok 2 - result
    ok 3
    1..3
ok 44 - returning 1 from on_missing_required_args hook
    # Subtest: arg values set by on_missing_required_args hook
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 45 - arg values set by on_missing_required_args hook
    # Subtest: Go::L configuration: bundling
    ok 1 - success (status == 200)
    ok 2 - result
    1..2
ok 46 - Go::L configuration: bundling
    # Subtest: cmdline_on_getopt (basics)
    ok 1 - success (status == 200)
    ok 2
    1..2
ok 47 - cmdline_on_getopt (basics)
    # Subtest: cmdline_on_getopt for arg with pos, feed opts
    ok 1 - success (status == 200)
    ok 2
    1..2
ok 48 - cmdline_on_getopt for arg with pos, feed opts
    # Subtest: cmdline_on_getopt for arg with pos, feed arg
    ok 1 - success (status == 200)
    ok 2
    1..2
ok 49 - cmdline_on_getopt for arg with pos, feed arg
    # Subtest: cmdline_on_getopt for arg with pos + greedy, feed opts
    ok 1 - success (status == 200)
    ok 2
    1..2
ok 50 - cmdline_on_getopt for arg with pos + greedy, feed opts
    # Subtest: cmdline_on_getopt for arg with pos + greedy, feed args
    ok 1 - success (status == 200)
    ok 2
    1..2
ok 51 - cmdline_on_getopt for arg with pos + greedy, feed args
    # Subtest: error 501 (1)
    ok 1 - status
    1..1
ok 52 - error 501 (1)
    # Subtest: error 501 (2)
    ok 1 - status
    1..1
ok 53 - error 501 (2)
    # Subtest: option: ignore_converted_code
    ok 1 - status
    ok 2 - success (status == 200)
    1..2
ok 54 - option: ignore_converted_code
    # Subtest: args option
        # Subtest: no preset args -> missing
        ok 1 - success (status == 200)
        ok 2 - result
        ok 3
        1..3
    ok 1 - no preset args -> missing
        # Subtest: arg a is preset -> ok
        ok 1 - success (status == 200)
        ok 2 - result
        ok 3
        1..3
    ok 2 - arg a is preset -> ok
        # Subtest: unknown arg in input args is ok
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 3 - unknown arg in input args is ok
        # Subtest: argv overrides input args
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 4 - argv overrides input args
    1..4
ok 55 - args option
    # Subtest: arg submetadata
        # Subtest: getargs(--a, 1, --b, 2, --c-a, 3, --c-b, 4)
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 1 - getargs(--a, 1, --b, 2, --c-a, 3, --c-b, 4)
    1..1
ok 56 - arg submetadata
    # Subtest: arg element submetadata
        # Subtest: getargs(--a, 1, --b, 2, --c-a, 3, --c-b, 4)
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 1 - getargs(--a, 1, --b, 2, --c-a, 3, --c-b, 4)
        # Subtest: getargs(--a, 1, --b, 2, --c-a, 3, --c-a, 4, --c-b, 5)
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 2 - getargs(--a, 1, --b, 2, --c-a, 3, --c-a, 4, --c-b, 5)
    1..2
ok 57 - arg element submetadata
    # Subtest: base64
        # Subtest: getargs(--data, 123)
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 1 - getargs(--data, 123)
        # Subtest: getargs(--data-base64, AAAA)
        ok 1 - success (status == 200)
        ok 2 - result
        1..2
    ok 2 - getargs(--data-base64, AAAA)
    1..2
ok 58 - base64
1..58
ok
t/release-pod-coverage.t ............ skipped: these tests are for release candidate testing
t/release-pod-syntax.t .............. skipped: these tests are for release candidate testing
t/release-rinci.t ................... skipped: these tests are for release candidate testing
All tests successful.
Files=6, Tests=60,  2 wallclock secs ( 0.05 usr  0.05 sys +  0.37 cusr  0.15 csys =  0.62 CPU)
Result: PASS
  PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Perinci-Sub-GetArgs-Argv" VERSION="0.59" DATE="2014-11-20">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Get subroutine arguments from command line arguments (@ARGV)</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Perinci-Sub-GetArgs-Argv-0.59.tar.gz"/>
  <PROVIDE NAME="Perinci::Sub::GetArgs::Argv" VERSION="0.59"/>
  <REQUIRE NAME="Data::Clean::FromJSON" VERSION="0.11"/>
  <REQUIRE NAME="Data::Sah::Normalize"/>
  <REQUIRE NAME="Function::Fallback::CoreOrPP"/>
  <REQUIRE NAME="Getopt::Long::Util" VERSION="0.77"/>
  <REQUIRE NAME="JSON::"/>
  <REQUIRE NAME="Perinci::Sub::GetArgs::Array" VERSION="0.14"/>
  <REQUIRE NAME="Perinci::Sub::Normalize" VERSION="0.07"/>
  <REQUIRE NAME="Perinci::Sub::Util"/>
  <REQUIRE NAME="Rinci::" VERSION="1.001057"/>
  <REQUIRE NAME="YAML::Syck"/>
  <!-- Built 2014-11-20 with ActivePerl-1600 on cpanfly-linux-x64.activestate.com (Fedora Core release 5 (Bordeaux), glibc 2.4 development) log Perinci-CmdLine-Lite-0.50.d/log-20141120T020427.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT && tar cvf - Perinci-Sub-GetArgs-Argv-0.59.ppd blib) | gzip -c >/home/fly1600/var/REPO/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.59.tar.gz
Perinci-Sub-GetArgs-Argv-0.59.ppd
blib/
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/Sub/
blib/lib/Perinci/Sub/GetArgs/
blib/lib/Perinci/Sub/GetArgs/Argv.pm
blib/man3/
blib/man3/Perinci::Sub::GetArgs::Argv.3
>>> mv /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/Perinci-Sub-GetArgs-Argv-0.59.ppd /home/fly1600/var/REPO/P/PE/PERLANCAR
Running make for P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz

>>> make
cp lib/Perinci/Sub/To/CLIOptSpec.pm blib/lib/Perinci/Sub/To/CLIOptSpec.pm
Manifying 1 pod document
  PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
  make -- OK
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..1
ok 1 - Perinci/Sub/To/CLIOptSpec.pm loaded ok
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=1,  0 wallclock secs ( 0.03 usr  0.02 sys +  0.14 cusr  0.03 csys =  0.22 CPU)
Result: PASS
  PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Perinci-Sub-To-CLIOptSpec" VERSION="0.01" DATE="2014-11-20">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Generate data structure convenient for producing CLI help/usage</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Perinci-Sub-To-CLIOptSpec-0.01.tar.gz"/>
  <PROVIDE NAME="Perinci::Sub::To::CLIOptSpec" VERSION="0.01"/>
  <REQUIRE NAME="Perinci::Object"/>
  <REQUIRE NAME="Perinci::Sub::GetArgs::Argv" VERSION="0.59"/>
  <REQUIRE NAME="Perinci::Sub::Normalize"/>
  <REQUIRE NAME="Rinci::" VERSION="1.001070"/>
  <!-- Built 2014-11-20 with ActivePerl-1600 on cpanfly-linux-x64.activestate.com (Fedora Core release 5 (Bordeaux), glibc 2.4 development) log Perinci-CmdLine-Lite-0.50.d/log-20141120T020427.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3 && tar cvf - Perinci-Sub-To-CLIOptSpec-0.01.ppd blib) | gzip -c >/home/fly1600/var/REPO/P/PE/PERLANCAR/Perinci-Sub-To-CLIOptSpec-0.01.tar.gz
Perinci-Sub-To-CLIOptSpec-0.01.ppd
blib/
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/Sub/
blib/lib/Perinci/Sub/To/
blib/lib/Perinci/Sub/To/CLIOptSpec.pm
blib/man3/
blib/man3/Perinci::Sub::To::CLIOptSpec.3
>>> mv /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/Perinci-Sub-To-CLIOptSpec-0.01.ppd /home/fly1600/var/REPO/P/PE/PERLANCAR
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/fly1600/var/cpan/build/Perinci-CmdLine-Lite-0.50-NYWWxr
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz

>>> make
cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm
cp lib/Perinci/CmdLine/Manual/Examples.pod blib/lib/Perinci/CmdLine/Manual/Examples.pod
cp lib/Test/Perinci/CmdLine.pm blib/lib/Test/Perinci/CmdLine.pm
cp lib/Perinci/CmdLine/Manual/FAQ.pod blib/lib/Perinci/CmdLine/Manual/FAQ.pod
cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm
cp lib/Perinci/CmdLine/Manual.pod blib/lib/Perinci/CmdLine/Manual.pod
Manifying 6 pod documents
  PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
  make -- OK
Prepending /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-To-CLIOptSpec-0.01-ExBEh3/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-GetArgs-Argv-0.59-rD6FXT/blib/lib /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/arch /home/fly1600/var/cpan/build/Perinci-Examples-0.42-pr8v6o/blib/lib /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/arch /home/fly1600/var/cpan/build/Perinci-Sub-Util-0.40-gQxz1j/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..3
ok 1 - Perinci/CmdLine/Base.pm loaded ok
ok 2 - Perinci/CmdLine/Lite.pm loaded ok
ok 3 - Test/Perinci/CmdLine.pm loaded ok
ok
t/01-embed.t .............. 
    # Subtest: test_run: run works
    ok 1 - doesn't die
    ok 2 - exit code
    ok 3 - output_re
    1..3
ok 1 - test_run: run works
    # Subtest: test_complete: cmd --bar^
    ok 1 - exit code = 0
    ok 2 - result
    1..2
ok 2 - test_complete: cmd --bar^
1..2
ok
t/complete.t .............. 
    # Subtest: test_complete: cmd --s1 ap^
    ok 1 - exit code = 0
    ok 2 - result
    1..2
ok 1 - test_complete: cmd --s1 ap^
1..1
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
t/run.t ................... 
    # Subtest: help action
        # Subtest: test_run: --help
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 1 - test_run: --help
        # Subtest: test_run: has subcommands
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 2 - test_run: has subcommands
        # Subtest: test_run: help on subcommand
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 3 - test_run: help on subcommand
    1..3
ok 1 - help action
    # Subtest: version action
        # Subtest: test_run: --version
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 1 - test_run: --version
    1..1
ok 2 - version action
    # Subtest: subcommands action
        # Subtest: test_run: --subcommands
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 1 - test_run: --subcommands
        # Subtest: test_run: unknown subcommand = error
        ok 1 - doesn't die
        ok 2 - exit code
        1..2
    ok 2 - test_run: unknown subcommand = error
        # Subtest: test_run: default_subcommand
        ok 1 - doesn't die
        ok 2 - exit code
        1..2
    ok 3 - test_run: default_subcommand
        # Subtest: test_run: default_subcommand 2
        ok 1 - doesn't die
        ok 2 - exit code
        1..2
    ok 4 - test_run: default_subcommand 2
    1..4
ok 3 - subcommands action
    # Subtest: output formats
        # Subtest: test_run: --json
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 1 - test_run: --json
        # Subtest: text-pretty
            # Subtest: test_run: undef
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 1 - test_run: undef
            # Subtest: test_run: scalar
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 2 - test_run: scalar
            # Subtest: test_run: empty array
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 3 - test_run: empty array
            # Subtest: test_run: aos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 4 - test_run: aos
            # Subtest: test_run: aoaos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 5 - test_run: aoaos
            # Subtest: test_run: aohos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 6 - test_run: aohos
            # Subtest: test_run: hos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 7 - test_run: hos
            # Subtest: test_run: hohos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 8 - test_run: hohos
        1..8
    ok 2 - text-pretty
        # Subtest: text-simple
            # Subtest: test_run: undef
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 1 - test_run: undef
            # Subtest: test_run: scalar
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 2 - test_run: scalar
            # Subtest: test_run: empty array
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 3 - test_run: empty array
            # Subtest: test_run: aos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 4 - test_run: aos
            # Subtest: test_run: aoaos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 5 - test_run: aoaos
            # Subtest: test_run: aohos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 6 - test_run: aohos
            # Subtest: test_run: hos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 7 - test_run: hos
            # Subtest: test_run: hohos
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - output_re
            1..3
        ok 8 - test_run: hohos
        1..8
    ok 3 - text-simple
    1..3
ok 4 - output formats
    # Subtest: call action
        # Subtest: test_run: single command
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 1 - test_run: single command
        # Subtest: test_run: default property of arg spec is observed
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - default number of pairs
        1..3
    ok 2 - test_run: default property of arg spec is observed
        # Subtest: test_run: schema default of arg is observed
        ok 1 - doesn't die
        ok 2 - exit code
        1..2
    ok 3 - test_run: schema default of arg is observed
        # Subtest: test_run: multiple subcommands (subcommand not specified -> help)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 4 - test_run: multiple subcommands (subcommand not specified -> help)
        # Subtest: test_run: multiple subcommands (subc specified via first cli arg)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 5 - test_run: multiple subcommands (subc specified via first cli arg)
        # Subtest: test_run: multiple subcommands (subc specified via default_subcommand)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 6 - test_run: multiple subcommands (subc specified via default_subcommand)
        # Subtest: test_run: multiple subcommands (subc specified via --cmd)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 7 - test_run: multiple subcommands (subc specified via --cmd)
        # Subtest: test_run: args_as array
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 8 - test_run: args_as array
        # Subtest: test_run: args_as arrayref
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 9 - test_run: args_as arrayref
        # Subtest: test_run: args_as hashref
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 10 - test_run: args_as hashref
        # Subtest: test_run: result_naked
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 11 - test_run: result_naked
    1..11
ok 5 - call action
    # Subtest: cmdline_src
        # Subtest: test_run: unknown value
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 1 - test_run: unknown value
        # Subtest: test_run: arg type not str/array
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 2 - test_run: arg type not str/array
        # Subtest: test_run: multiple stdin
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 3 - test_run: multiple stdin
        # Subtest: test_run: file 1
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 4 - test_run: file 1
        # Subtest: test_run: file 1 (special hint arguments passed)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 5 - test_run: file 1 (special hint arguments passed)
        # Subtest: test_run: file 2
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 6 - test_run: file 2
        # Subtest: test_run: file 2 (special hint arguments passed)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 7 - test_run: file 2 (special hint arguments passed)
        # Subtest: test_run: file not found
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 8 - test_run: file not found
        # Subtest: test_run: file, missing required arg
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 9 - test_run: file, missing required arg
        # Subtest: test_run: stdin_or_files file
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 10 - test_run: stdin_or_files file
        # Subtest: test_run: stdin_or_files file (special hint arguments passed)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 11 - test_run: stdin_or_files file (special hint arguments passed)
        # Subtest: test_run: stdin_or_files file not found
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 12 - test_run: stdin_or_files file not found
        # Subtest: test_run: stdin str
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 13 - test_run: stdin str
        # Subtest: test_run: stdin str (special hint arguments passed)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 14 - test_run: stdin str (special hint arguments passed)
        # Subtest: test_run: stdin array
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 15 - test_run: stdin array
        # Subtest: test_run: stdin + arg set to "-"
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 16 - test_run: stdin + arg set to "-"
        # Subtest: test_run: stdin + arg set to non "-"
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 17 - test_run: stdin + arg set to non "-"
        # Subtest: test_run: stdin_line + from stdin
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 18 - test_run: stdin_line + from stdin
        # Subtest: test_run: stdin_line + from stdin (special hint arguments passed)
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 19 - test_run: stdin_line + from stdin (special hint arguments passed)
        # Subtest: test_run: stdin_line + from cmdline
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 20 - test_run: stdin_line + from cmdline
        # Subtest: test_run: multi stdin_line
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 21 - test_run: multi stdin_line
    1..21
ok 6 - cmdline_src
    # Subtest: result metadata
        # Subtest: cmdline.exit_code
            # Subtest: test_run: 
            ok 1 - doesn't die
            ok 2 - exit code
            ok 3 - status
            1..3
        ok 1 - test_run: 
        1..1
    ok 1 - cmdline.exit_code
        # Subtest: cmdline.result
            # Subtest: test_run: 
            ok 1 - doesn't die
            ok 2 - output_re
            1..2
        ok 1 - test_run: 
        1..1
    ok 2 - cmdline.result
        # Subtest: cmdline.default_format
            # Subtest: test_run: 
            ok 1 - doesn't die
            ok 2 - output_re
            1..2
        ok 1 - test_run: 
            # Subtest: test_run: --format text
            ok 1 - doesn't die
            ok 2 - output_re
            1..2
        ok 2 - test_run: --format text
        1..2
    ok 3 - cmdline.default_format
        # Subtest: cmdline.skip_format
            # Subtest: test_run: 
            ok 1 - doesn't die
            ok 2 - output_re
            1..2
        ok 1 - test_run: 
        1..1
    ok 4 - cmdline.skip_format
    1..4
ok 7 - result metadata
    # Subtest: config
        # Subtest: test_run: config_dirs
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 1 - test_run: config_dirs
        # Subtest: test_run: config_filename
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 2 - test_run: config_filename
        # Subtest: test_run: --noconfig
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 3 - test_run: --noconfig
        # Subtest: test_run: --config-path
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 4 - test_run: --config-path
        # Subtest: test_run: --config-profile
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 5 - test_run: --config-profile
        # Subtest: test_run: unknown config profile -> error
        ok 1 - doesn't die
        ok 2 - status
        1..2
    ok 6 - test_run: unknown config profile -> error
        # Subtest: test_run: unknown config profile but does not read config -> ok
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 7 - test_run: unknown config profile but does not read config -> ok
        # Subtest: test_run: unknown config profile but set ignore_missing_config_profile_section -> ok
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 8 - test_run: unknown config profile but set ignore_missing_config_profile_section -> ok
        # Subtest: test_run: subcommand
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 9 - test_run: subcommand
        # Subtest: test_run: subcommand + --config-profile
        ok 1 - doesn't die
        ok 2 - output_re
        1..2
    ok 10 - test_run: subcommand + --config-profile
        # Subtest: test_run: array-ify if argument is array
        ok 1 - doesn't die
        ok 2 - exit code
        ok 3 - output_re
        1..3
    ok 11 - test_run: array-ify if argument is array
    1..11
ok 8 - config
1..8
ok
All tests successful.
Files=7, Tests=14,  2 wallclock secs ( 0.08 usr  0.06 sys +  0.94 cusr  0.25 csys =  1.33 CPU)
Result: PASS
  PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Perinci-CmdLine-Lite" VERSION="0.50" DATE="2014-11-20">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>A lightweight Rinci/Riap-based command-line application framework</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Perinci-CmdLine-Lite-0.50.tar.gz"/>
  <PROVIDE NAME="Perinci::CmdLine::Base" VERSION="0.50"/>
  <PROVIDE NAME="Perinci::CmdLine::Lite" VERSION="0.50"/>
  <PROVIDE NAME="Test::Perinci::CmdLine" VERSION="0.50"/>
  <REQUIRE NAME="Complete::Bash" VERSION="0.09"/>
  <REQUIRE NAME="Complete::Util" VERSION="0.13"/>
  <REQUIRE NAME="Config::IOD::Reader"/>
  <REQUIRE NAME="Data::Check::Structure"/>
  <REQUIRE NAME="Data::Clean::JSON"/>
  <REQUIRE NAME="File::Which"/>
  <REQUIRE NAME="JSON::"/>
  <REQUIRE NAME="Log::Any"/>
  <REQUIRE NAME="Log::Any::Adapter"/>
  <REQUIRE NAME="Log::Any::Adapter::ScreenColoredLevel"/>
  <REQUIRE NAME="Mo::"/>
  <REQUIRE NAME="Perinci::Access::Lite"/>
  <REQUIRE NAME="Perinci::Object"/>
  <REQUIRE NAME="Perinci::Sub::Complete" VERSION="0.60"/>
  <REQUIRE NAME="Perinci::Sub::GetArgs::Argv" VERSION="0.55"/>
  <REQUIRE NAME="Perinci::Sub::To::CLIOptSpec" VERSION="0.01"/>
  <REQUIRE NAME="Rinci::" VERSION="1.001069"/>
  <REQUIRE NAME="Term::ReadKey"/>
  <REQUIRE NAME="Text::Table::Tiny"/>
  <REQUIRE NAME="experimental::"/>
  <!-- Built 2014-11-20 with ActivePerl-1600 on cpanfly-linux-x64.activestate.com (Fedora Core release 5 (Bordeaux), glibc 2.4 development) log Perinci-CmdLine-Lite-0.50.d/log-20141120T020427.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/var/cpan/build/Perinci-CmdLine-Lite-0.50-NYWWxr && tar cvf - Perinci-CmdLine-Lite-0.50.ppd blib) | gzip -c >/home/fly1600/var/REPO/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.50.tar.gz
Perinci-CmdLine-Lite-0.50.ppd
blib/
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/CmdLine/
blib/lib/Perinci/CmdLine/Base.pm
blib/lib/Perinci/CmdLine/Manual/
blib/lib/Perinci/CmdLine/Manual/Examples.pod
blib/lib/Perinci/CmdLine/Manual/FAQ.pod
blib/lib/Perinci/CmdLine/Lite.pm
blib/lib/Perinci/CmdLine/Manual.pod
blib/lib/Test/
blib/lib/Test/Perinci/
blib/lib/Test/Perinci/CmdLine.pm
blib/man3/
blib/man3/Perinci::CmdLine::Base.3
blib/man3/Perinci::CmdLine::Lite.3
blib/man3/Perinci::CmdLine::Manual.3
blib/man3/Perinci::CmdLine::Manual::Examples.3
blib/man3/Perinci::CmdLine::Manual::FAQ.3
blib/man3/Test::Perinci::CmdLine.3
>>> mv /home/fly1600/var/cpan/build/Perinci-CmdLine-Lite-0.50-NYWWxr/Perinci-CmdLine-Lite-0.50.ppd /home/fly1600/var/REPO/P/PE/PERLANCAR
VmSize:	  256772 kB
Finished 2014-11-20T02:04:44