PATH=/usr/bin:/bin:/home/fly1800/cpanfly-5.18/var/megalib/bin Start 2016-02-15T08:21:02 ActivePerl-1800 CPAN-2.10 Reading '/home/fly1800/cpanfly-5.18/var/cpan/Metadata' Database was generated on Mon, 15 Feb 2016 06:54:03 GMT Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-depak-0.51.tar.gz ok App-depak-0.51/ App-depak-0.51/bin/ App-depak-0.51/bin/depak App-depak-0.51/META.json App-depak-0.51/LICENSE App-depak-0.51/Changes App-depak-0.51/META.yml App-depak-0.51/Makefile.PL App-depak-0.51/t/ App-depak-0.51/t/release-pod-syntax.t App-depak-0.51/t/release-pod-coverage.t App-depak-0.51/t/release-rinci.t App-depak-0.51/t/00-compile.t App-depak-0.51/README App-depak-0.51/dist.ini App-depak-0.51/lib/ App-depak-0.51/lib/Perinci/ App-depak-0.51/lib/Perinci/CmdLine/ App-depak-0.51/lib/Perinci/CmdLine/depak.pm App-depak-0.51/lib/App/ App-depak-0.51/lib/App/depak.pm App-depak-0.51/MANIFEST App-depak-0.51/weaver.ini Configuring P/PE/PERLANCAR/App-depak-0.51.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Warning: prerequisite App::lcpan 0.18 not found. Warning: prerequisite App::tracepm 0.17 not found. Warning: prerequisite Perinci::CmdLine::Lite 0.49 not found. We have 0.02. Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::depak Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-depak-0.51.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-depak-0.51.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-depak-0.51.tar.gz ---- App::lcpan [requires] Perinci::CmdLine::Lite [requires] App::tracepm [requires] Running test for module 'App::lcpan' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-lcpan-0.73.tar.gz ok App-lcpan-0.73/ App-lcpan-0.73/bin/ App-lcpan-0.73/bin/lcpanm App-lcpan-0.73/bin/lcpan App-lcpan-0.73/META.json App-lcpan-0.73/LICENSE App-lcpan-0.73/Changes App-lcpan-0.73/META.yml App-lcpan-0.73/Makefile.PL App-lcpan-0.73/t/ App-lcpan-0.73/t/release-pod-syntax.t App-lcpan-0.73/t/release-pod-coverage.t App-lcpan-0.73/t/release-sql_schema_versioned.t App-lcpan-0.73/t/release-rinci.t App-lcpan-0.73/t/00-compile.t App-lcpan-0.73/README App-lcpan-0.73/dist.ini App-lcpan-0.73/lib/ App-lcpan-0.73/lib/LWP/ App-lcpan-0.73/lib/LWP/UserAgent/ App-lcpan-0.73/lib/LWP/UserAgent/Patch/ App-lcpan-0.73/lib/LWP/UserAgent/Patch/FilterLcpan.pm App-lcpan-0.73/lib/App/ App-lcpan-0.73/lib/App/lcpan.pm App-lcpan-0.73/lib/App/lcpan/ App-lcpan-0.73/lib/App/lcpan/Manual/ App-lcpan-0.73/lib/App/lcpan/Manual/Cookbook.pod App-lcpan-0.73/lib/App/lcpan/PodParser.pm App-lcpan-0.73/lib/App/lcpan/Cmd/ App-lcpan-0.73/lib/App/lcpan/Cmd/author_scripts.pm App-lcpan-0.73/lib/App/lcpan/Cmd/scripts_by_mention_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/doc.pm App-lcpan-0.73/lib/App/lcpan/Cmd/extract_mod.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mod2rel.pm App-lcpan-0.73/lib/App/lcpan/Cmd/rels.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_dist_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mods_by_rdep_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/dist2rel.pm App-lcpan-0.73/lib/App/lcpan/Cmd/update.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_script_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/namespaces.pm App-lcpan-0.73/lib/App/lcpan/Cmd/distmods.pm App-lcpan-0.73/lib/App/lcpan/Cmd/author_rels.pm App-lcpan-0.73/lib/App/lcpan/Cmd/stats.pm App-lcpan-0.73/lib/App/lcpan/Cmd/dists_by_dep_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/script2dist.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mods_by_mention_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/copy_script.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_rel_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/scripts.pm App-lcpan-0.73/lib/App/lcpan/Cmd/script2rel.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_mod_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/contents.pm App-lcpan-0.73/lib/App/lcpan/Cmd/deps.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_mod_mention_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/extract_rel.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_rdep_count.pm App-lcpan-0.73/lib/App/lcpan/Cmd/copy_mod.pm App-lcpan-0.73/lib/App/lcpan/Cmd/author_dists.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mentions.pm App-lcpan-0.73/lib/App/lcpan/Cmd/reset.pm App-lcpan-0.73/lib/App/lcpan/Cmd/authors_by_filesize.pm App-lcpan-0.73/lib/App/lcpan/Cmd/author_mods.pm App-lcpan-0.73/lib/App/lcpan/Cmd/extract_script.pm App-lcpan-0.73/lib/App/lcpan/Cmd/scripts_from_same_dist.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mods_from_same_dist.pm App-lcpan-0.73/lib/App/lcpan/Cmd/dists.pm App-lcpan-0.73/lib/App/lcpan/Cmd/releases.pm App-lcpan-0.73/lib/App/lcpan/Cmd/copy_rel.pm App-lcpan-0.73/lib/App/lcpan/Cmd/modules.pm App-lcpan-0.73/lib/App/lcpan/Cmd/author_rdeps.pm App-lcpan-0.73/lib/App/lcpan/Cmd/rdeps.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mod2dist.pm App-lcpan-0.73/lib/App/lcpan/Cmd/mods.pm App-lcpan-0.73/lib/App/lcpan/Cmd/script2mod.pm App-lcpan-0.73/lib/App/lcpan/Cmd/distscripts.pm App-lcpan-0.73/MANIFEST App-lcpan-0.73/weaver.ini Configuring P/PE/PERLANCAR/App-lcpan-0.73.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Warning: prerequisite App::ShellCompleter::cpanm 0 not found. Warning: prerequisite LWP::UserAgent::Patch::FilterMirrorMaxSize 0 not found. Warning: prerequisite Perinci::CmdLine::Util::Config 0 not found. Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::lcpan Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-lcpan-0.73.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-lcpan-0.73.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-lcpan-0.73.tar.gz ---- App::ShellCompleter::cpanm [requires] LWP::UserAgent::Patch::FilterMirrorMaxSize [requires] Perinci::CmdLine::Util::Config [requires] Running test for module 'App::ShellCompleter::cpanm' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz ok App-ShellCompleter-cpanm-0.15/ App-ShellCompleter-cpanm-0.15/bin/ App-ShellCompleter-cpanm-0.15/bin/_cpanm App-ShellCompleter-cpanm-0.15/META.json App-ShellCompleter-cpanm-0.15/LICENSE App-ShellCompleter-cpanm-0.15/Changes App-ShellCompleter-cpanm-0.15/META.yml App-ShellCompleter-cpanm-0.15/Makefile.PL App-ShellCompleter-cpanm-0.15/t/ App-ShellCompleter-cpanm-0.15/t/release-pod-syntax.t App-ShellCompleter-cpanm-0.15/t/release-pod-coverage.t App-ShellCompleter-cpanm-0.15/t/00-compile.t App-ShellCompleter-cpanm-0.15/README App-ShellCompleter-cpanm-0.15/dist.ini App-ShellCompleter-cpanm-0.15/lib/ App-ShellCompleter-cpanm-0.15/lib/App/ App-ShellCompleter-cpanm-0.15/lib/App/ShellCompleter/ App-ShellCompleter-cpanm-0.15/lib/App/ShellCompleter/cpanm.pm App-ShellCompleter-cpanm-0.15/MANIFEST App-ShellCompleter-cpanm-0.15/weaver.ini Configuring P/PE/PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Warning: prerequisite Perinci::CmdLine::Util::Config 0 not found. Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::ShellCompleter::cpanm Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz ---- Perinci::CmdLine::Util::Config [requires] Running test for module 'Perinci::CmdLine::Util::Config' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz ok Perinci-CmdLine-Lite-1.50/ Perinci-CmdLine-Lite-1.50/README Perinci-CmdLine-Lite-1.50/lib/ Perinci-CmdLine-Lite-1.50/lib/Perinci/ Perinci-CmdLine-Lite-1.50/lib/Perinci/CmdLine/ Perinci-CmdLine-Lite-1.50/lib/Perinci/CmdLine/Lite.pm Perinci-CmdLine-Lite-1.50/lib/Perinci/CmdLine/Base.pm Perinci-CmdLine-Lite-1.50/lib/Perinci/CmdLine/Util/ Perinci-CmdLine-Lite-1.50/lib/Perinci/CmdLine/Util/Config.pm Perinci-CmdLine-Lite-1.50/Makefile.PL Perinci-CmdLine-Lite-1.50/share/ Perinci-CmdLine-Lite-1.50/share/templates/ Perinci-CmdLine-Lite-1.50/share/templates/description.txt Perinci-CmdLine-Lite-1.50/share/templates/synopsis.txt Perinci-CmdLine-Lite-1.50/Changes Perinci-CmdLine-Lite-1.50/dist.ini Perinci-CmdLine-Lite-1.50/LICENSE Perinci-CmdLine-Lite-1.50/t/ Perinci-CmdLine-Lite-1.50/t/00-compile.t Perinci-CmdLine-Lite-1.50/t/suite.t Perinci-CmdLine-Lite-1.50/t/release-rinci.t Perinci-CmdLine-Lite-1.50/t/author-pod-syntax.t Perinci-CmdLine-Lite-1.50/t/author-pod-coverage.t Perinci-CmdLine-Lite-1.50/weaver.ini Perinci-CmdLine-Lite-1.50/MANIFEST Perinci-CmdLine-Lite-1.50/META.json Perinci-CmdLine-Lite-1.50/META.yml Perinci-CmdLine-Lite-1.50/devscripts/ Perinci-CmdLine-Lite-1.50/devscripts/bench-startup Configuring P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Warning: prerequisite Progress::Any::Output::TermProgressBarColor 0.17 not found. We have 0.10. Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::CmdLine::Lite Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz ---- Progress::Any::Output::TermProgressBarColor [requires] Running test for module 'Progress::Any::Output::TermProgressBarColor' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz ok Progress-Any-Output-TermProgressBarColor-0.21/ Progress-Any-Output-TermProgressBarColor-0.21/Changes Progress-Any-Output-TermProgressBarColor-0.21/LICENSE Progress-Any-Output-TermProgressBarColor-0.21/MANIFEST Progress-Any-Output-TermProgressBarColor-0.21/lib/ Progress-Any-Output-TermProgressBarColor-0.21/lib/Progress/ Progress-Any-Output-TermProgressBarColor-0.21/lib/Progress/Any/ Progress-Any-Output-TermProgressBarColor-0.21/lib/Progress/Any/Output/ Progress-Any-Output-TermProgressBarColor-0.21/lib/Progress/Any/Output/TermProgressBarColor.pm Progress-Any-Output-TermProgressBarColor-0.21/README Progress-Any-Output-TermProgressBarColor-0.21/META.json Progress-Any-Output-TermProgressBarColor-0.21/Makefile.PL Progress-Any-Output-TermProgressBarColor-0.21/dist.ini Progress-Any-Output-TermProgressBarColor-0.21/t/ Progress-Any-Output-TermProgressBarColor-0.21/t/release-rinci.t Progress-Any-Output-TermProgressBarColor-0.21/t/release-pod-coverage.t Progress-Any-Output-TermProgressBarColor-0.21/t/00-compile.t Progress-Any-Output-TermProgressBarColor-0.21/t/01-basic.t Progress-Any-Output-TermProgressBarColor-0.21/t/release-pod-syntax.t Progress-Any-Output-TermProgressBarColor-0.21/weaver.ini Progress-Any-Output-TermProgressBarColor-0.21/META.yml Configuring P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Progress::Any::Output::TermProgressBarColor Writing MYMETA.yml and MYMETA.json PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz >>> make cp lib/Progress/Any/Output/TermProgressBarColor.pm blib/lib/Progress/Any/Output/TermProgressBarColor.pm Manifying 1 pod document PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Progress/Any/Output/TermProgressBarColor.pm loaded ok ok # Failed test at t/01-basic.t line 18. # ' 10% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default' # at t/01-basic.t line 20. # Failed test at t/01-basic.t line 28. # 'Use of uninitialized value $cd in numeric ge (>=) at /home/fly1800/cpanfly-5.18/var/megalib/Color/ANSI/Util.pm line 281. # Use of uninitialized value $cd in numeric ge (>=) at /home/fly1800/cpanfly-5.18/var/megalib/Color/ANSI/Util.pm line 283. # Use of uninitialized value $cd in numeric ge (>=) at /home/fly1800/cpanfly-5.18/var/megalib/Color/ANSI/Util.pm line 281. # Use of uninitialized value $cd in numeric ge (>=) at /home/fly1800/cpanfly-5.18/var/megalib/Color/ANSI/Util.pm line 283. #  20% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'fh option' # at t/01-basic.t line 30. # Failed test at t/01-basic.t line 41. # ' 30% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default (wide)' # at t/01-basic.t line 43. # Looks like you failed 3 tests of 3. t/01-basic.t .............. # Subtest: default not ok 1 ok 2 1..2 not ok 1 - default # Subtest: fh option not ok 1 ok 2 1..2 not ok 2 - fh option # Subtest: default (wide) not ok 1 ok 2 1..2 not ok 3 - default (wide) 1..3 Dubious, test returned 3 (wstat 768, 0x300) Failed 3/3 subtests t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/01-basic.t (Wstat: 768 Tests: 3 Failed: 3) Failed tests: 1-3 Non-zero exit status: 3 Files=5, Tests=4, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.28 cusr 0.03 csys = 0.35 CPU) Result: FAIL Failed 1/5 test programs. 3/4 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Warning: Prerequisite 'Progress::Any::Output::TermProgressBarColor => 0.17' for 'PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz' failed when processing 'PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.21.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp share/templates/synopsis.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt cp share/templates/description.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm cp lib/Perinci/CmdLine/Util/Config.pm blib/lib/Perinci/CmdLine/Util/Config.pm Manifying 3 pod documents PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt (unchanged) Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt (unchanged) PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..3 ok 1 - Perinci/CmdLine/Base.pm loaded ok ok 2 - Perinci/CmdLine/Lite.pm loaded ok ok 3 - Perinci/CmdLine/Util/Config.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author t/release-rinci.t ........ skipped: these tests are for release candidate testing # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'cliECHXocG4: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:wet)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via env, 0)' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'clieCF_EyDX: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:dry)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via env, 1)' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'cliVli4bJ94: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:dry)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via cmdline opt)' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Looks like you failed 3 tests of 4. # Failed test 'dry-run' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 292. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '255' # expected: '0' # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > # Failed test 'answer' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 256. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = '--number' # [] # Looks like you failed 2 tests of 2. # Failed test 'self-completion works' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '255' # expected: '0' # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > # Failed test 'answer' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 256. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = 'sc1' # [] # Looks like you failed 2 tests of 2. # Failed test 'completion of subcommand name' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '255' # expected: '0' # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > # Failed test 'answer' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 256. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = '--number' # [] # Looks like you failed 2 tests of 2. # Failed test 'completion of subcommand option' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Looks like you failed 3 tests of 4. # Failed test 'completion' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 292. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'sum-nums: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^s:^6$)' # Looks like you failed 2 tests of 2. # Failed test 'env read' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'sum-nums: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^s:^3$)' # Looks like you failed 2 tests of 2. # Failed test 'turned off via --no-env' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'sum-nums: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^s:^18$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:env_name' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Looks like you failed 3 tests of 4. # Failed test 'env' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 292. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=101\nb=201\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_dirs' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=104\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_filename' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --no-config' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=101\nb=201\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --config-path' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:a=111\nb=201\nc=\nd=201\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --config-profile' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '112' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'unknown config profile -> error' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'foo: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'unknown config profile but does not read config -> ok' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=102\nb=201\nc=201\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'subcommand' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog-old: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=121\nb=201\nc=201\nd=201\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'subcommand + --config-profile (old syntax)' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^a=121\nb=201\nc=201\nd=201\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'subcommand + --config-profile' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'sum: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^0$)' # Looks like you failed 2 tests of 2. # Failed test 'array-ify if argument is array' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Failed test 'exit_code' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 179. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 192. # 'prog3: ERROR 500: Can't load module Perinci::Examples: "gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Examples.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Access/Lite.pm line 54. # ' # doesn't match '(?^:^"a=101\\nb=\\nc=\\nd=\\ne=")' # Looks like you failed 2 tests of 2. # Failed test 'can also set common option' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 225. # Looks like you failed 12 tests of 13. # Failed test 'config file' # at /home/fly1800/cpanfly-5.18/var/megalib/Test/Perinci/CmdLine.pm line 292. # there are failing tests, not deleting tempdir /tmp/eaKwmIiilV # Looks like you failed 4 tests of 17. t/suite.t ................ # Subtest: help action ok 1 - dummy # Subtest: --help # Generated CLI script at /tmp/eaKwmIiilV/clifuNuMvg1 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clifuNuMvg1', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - --help # Subtest: extra args is okay # Generated CLI script at /tmp/eaKwmIiilV/clizuhsAnTf # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clizuhsAnTf', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help', # '1', # '2', # '3' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - extra args is okay # Subtest: help for cli with subcommands # Generated CLI script at /tmp/eaKwmIiilV/clio5eXG53z # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clio5eXG53z', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'sc1:/Perinci/Examples/Tiny/noop' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - help for cli with subcommands # Subtest: help on a subcommand # Generated CLI script at /tmp/eaKwmIiilV/cliwFgJpiAC # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliwFgJpiAC', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'sc1:/Perinci/Examples/Tiny/noop' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # 'sc1', # '--help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like ok 3 - stdout_unlike 1..3 ok 5 - help on a subcommand 1..5 ok 1 - help action # Subtest: version action ok 1 - dummy # Subtest: --version # Generated CLI script at /tmp/eaKwmIiilV/cliCkhOvQGh # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliCkhOvQGh', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--version' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - --version 1..2 ok 2 - version action # Subtest: subcommands action ok 1 - dummy # Subtest: --subcommands # Generated CLI script at /tmp/eaKwmIiilV/cliXs46Db3T # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliXs46Db3T', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'noop:/Perinci/Examples/Tiny/noop', # 'odd_even:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--subcommands' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - --subcommands # Subtest: unknown subcommand = error # Generated CLI script at /tmp/eaKwmIiilV/cliNWfQ9zMy # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliNWfQ9zMy', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'noop:/Perinci/Examples/Tiny/noop', # 'odd_even:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # 'foo' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - unknown subcommand = error # Subtest: default_subcommand # Generated CLI script at /tmp/eaKwmIiilV/clia7LzTXW_ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'noop', # 'output_file' => '/tmp/eaKwmIiilV/clia7LzTXW_', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'noop:/Perinci/Examples/Tiny/noop', # 'odd_even:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: <> # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - default_subcommand # Subtest: default_subcommand 2 # Generated CLI script at /tmp/eaKwmIiilV/cli03M42iW3 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'odd_even', # 'output_file' => '/tmp/eaKwmIiilV/cli03M42iW3', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'noop:/Perinci/Examples/Tiny/noop', # 'odd_even:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 5 - default_subcommand 2 1..5 ok 3 - subcommands action # Subtest: call action ok 1 - dummy # Subtest: embedded function+meta works # Generated CLI script at /tmp/eaKwmIiilV/cliw_jusT0p # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'code_before_instantiate_cmdline' => ' # our %SPEC; # $SPEC{square} = {v=>1.1, args=>{num=>{schema=>\'num*\', req=>1, pos=>0}}}; # sub square { my %args=@_; [200, "OK", $args{num}**2] } # ', # 'output_file' => '/tmp/eaKwmIiilV/cliw_jusT0p', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/main/square' # } # argv: [ # '12' # ] # Script's stdout: <144 # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - embedded function+meta works # Subtest: extra args not allowed # Generated CLI script at /tmp/eaKwmIiilV/cliCOmUgzkS # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliCOmUgzkS', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '1' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - extra args not allowed # Subtest: missing required args -> error # Generated CLI script at /tmp/eaKwmIiilV/cliBBYksNX8 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliBBYksNX8', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/odd_even' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - missing required args -> error # Subtest: common option: --format # Generated CLI script at /tmp/eaKwmIiilV/cliY4ct8Rff # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliY4ct8Rff', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--format', # 'json' # ] # Script's stdout: <["200","OK","abc",{"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - common option: --format # Subtest: common option: --json # Generated CLI script at /tmp/eaKwmIiilV/cliaH7CKh5Z # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliaH7CKh5Z', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json' # ] # Script's stdout: <["200","OK","abc",{"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 6 - common option: --json # Subtest: common option: --naked-res # Generated CLI script at /tmp/eaKwmIiilV/clirGSTQdrP # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clirGSTQdrP', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json', # '--naked-res' # ] # Script's stdout: <"abc" # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 7 - common option: --naked-res # Subtest: common option: --no-naked-res # Generated CLI script at /tmp/eaKwmIiilV/cli34WP1Bac # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli34WP1Bac', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json', # '--no-naked-res' # ] # Script's stdout: <["200","OK","abc",{"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 8 - common option: --no-naked-res # Subtest: common option: --cmd # Generated CLI script at /tmp/eaKwmIiilV/cliB2FWp8S3 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'noop', # 'output_file' => '/tmp/eaKwmIiilV/cliB2FWp8S3', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'noop:/Perinci/Examples/Tiny/noop', # 'odd_even:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--cmd', # 'odd_even', # '5' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 9 - common option: --cmd # Subtest: json argument # Generated CLI script at /tmp/eaKwmIiilV/cli9VneUZ2q # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli9VneUZ2q', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg-json', # '["a","b"]', # '--json' # ] # Script's stdout: <["200","OK",["a","b"],{"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 10 - json argument # Subtest: can handle function which returns naked result # Generated CLI script at /tmp/eaKwmIiilV/cliOGWhfDrw # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliOGWhfDrw', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/hello_naked' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 11 - can handle function which returns naked result 1..11 ok 4 - call action # Subtest: cmdline_src (error cases) ok 1 - dummy # Subtest: unknown value # Generated CLI script at /tmp/eaKwmIiilV/cliPD3YES_6 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliPD3YES_6', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_unknown' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 2 - unknown value # Subtest: arg type not str/array # Generated CLI script at /tmp/eaKwmIiilV/cliRfLARXm4 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliRfLARXm4', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_invalid_arg_type' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - arg type not str/array # Subtest: multiple stdin # Generated CLI script at /tmp/eaKwmIiilV/cliASpmNfT_ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliASpmNfT_', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin' # } # argv: [ # 'a', # 'b' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - multiple stdin 1..4 ok 5 - cmdline_src (error cases) # Subtest: cmdline_src (file) ok 1 - dummy # Subtest: file 1 # Generated CLI script at /tmp/eaKwmIiilV/cli6JyW8f8F # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli6JyW8f8F', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - file 1 # Subtest: file 1 (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/cliuMefLqm_ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliuMefLqm_', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--json', # '--a1', # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: <["200","OK","a1=foo\na2=[]",{"func.args":{"-cmdline_src_a1":"file","-cmdline_srcfilenames_a1":["/tmp/eaKwmIiilV/infile1"],"a1":"foo"},"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like ok 3 - stdout_like 1..3 ok 3 - file 1 (special hint arguments passed) # Subtest: file 2 # Generated CLI script at /tmp/eaKwmIiilV/clik_mUdD_c # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clik_mUdD_c', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/eaKwmIiilV/infile1', # '--a2', # '/tmp/eaKwmIiilV/infile2' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - file 2 # Subtest: file 2 (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/cliqIQYawQp # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliqIQYawQp', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--json', # '--a1', # '/tmp/eaKwmIiilV/infile1', # '--a2', # '/tmp/eaKwmIiilV/infile2' # ] # Script's stdout: <["200","OK","a1=foo\na2=[bar\n,baz]",{"func.args":{"-cmdline_src_a1":"file","-cmdline_src_a2":"file","-cmdline_srcfilenames_a1":["/tmp/eaKwmIiilV/infile1"],"-cmdline_srcfilenames_a2":["/tmp/eaKwmIiilV/infile2"],"a1":"foo","a2":["bar\n","baz"]},"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like ok 3 - stdout_like ok 4 - stdout_like ok 5 - stdout_like 1..5 ok 5 - file 2 (special hint arguments passed) # Subtest: file not found # Generated CLI script at /tmp/eaKwmIiilV/clilwltDaBC # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clilwltDaBC', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/eaKwmIiilV/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 6 - file not found # Subtest: file, missing required arg # Generated CLI script at /tmp/eaKwmIiilV/cli_TOws5oI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli_TOws5oI', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a2', # '/tmp/eaKwmIiilV/infile2' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 7 - file, missing required arg 1..7 ok 6 - cmdline_src (file) # Subtest: cmdline_src (stdin) ok 1 - dummy # Subtest: stdin str # Generated CLI script at /tmp/eaKwmIiilV/cli5zvBuIiz # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli5zvBuIiz', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - stdin str # Subtest: stdin str (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/cliCoVM2f37 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliCoVM2f37', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--json' # ] # Script's stdout: <["200","OK","a1=bar\nbaz",{"func.args":{"-cmdline_src_a1":"stdin","a1":"bar\nbaz"},"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - stdin str (special hint arguments passed) # Subtest: stdin array # Generated CLI script at /tmp/eaKwmIiilV/cliME3vO4UV # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliME3vO4UV', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_array' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - stdin array # Subtest: stdin + arg set to "-" # Generated CLI script at /tmp/eaKwmIiilV/cliLBiu0veY # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliLBiu0veY', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--a1', # '-' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - stdin + arg set to "-" # Subtest: stdin + arg set to non "-" # Generated CLI script at /tmp/eaKwmIiilV/clizC0ZCOK8 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clizC0ZCOK8', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--a1', # 'x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 6 - stdin + arg set to non "-" 1..6 ok 7 - cmdline_src (stdin) # Subtest: cmdline_src (stdin_line) ok 1 - dummy # Subtest: stdin_line + from stdin # Generated CLI script at /tmp/eaKwmIiilV/cliY_QRaGtY # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliY_QRaGtY', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--a2', # 'bar' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - stdin_line + from stdin # Subtest: stdin_line + from stdin (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/cliBeJiinNL # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliBeJiinNL', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--json', # '--a2', # 'bar' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - stdin_line + from stdin (special hint arguments passed) # Subtest: stdin_line + from cmdline # Generated CLI script at /tmp/eaKwmIiilV/clit0tTU9pk # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clit0tTU9pk', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--a2', # 'bar', # '--a1', # 'qux' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - stdin_line + from cmdline # Subtest: multi stdin_line # Generated CLI script at /tmp/eaKwmIiilV/cligdjhOsBp # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cligdjhOsBp', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin_line' # } # argv: [ # '--a3', # 'baz' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - multi stdin_line 1..5 ok 8 - cmdline_src (stdin_line) # Subtest: cmdline_src (stdin_or_file) ok 1 - dummy # Subtest: stdin_or_file file # Generated CLI script at /tmp/eaKwmIiilV/cliEcjl5yRE # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliEcjl5yRE', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - stdin_or_file file # Subtest: stdin_or_file file (extra argument) # Generated CLI script at /tmp/eaKwmIiilV/cliGf6uggu3 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliGf6uggu3', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/eaKwmIiilV/infile1', # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - stdin_or_file file (extra argument) # Subtest: stdin_or_file file (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/cli9dW5MiSf # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli9dW5MiSf', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '--json', # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: <["200","OK","a1=foo",{"func.args":{"-cmdline_src_a1":"stdin_or_file","-cmdline_srcfilenames_a1":["/tmp/eaKwmIiilV/infile1"],"a1":"foo"},"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like ok 3 - stdout_like 1..3 ok 4 - stdin_or_file file (special hint arguments passed) # Subtest: stdin_or_files file not found # Generated CLI script at /tmp/eaKwmIiilV/cliMSbbuDMn # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliMSbbuDMn', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/eaKwmIiilV/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 5 - stdin_or_files file not found # Subtest: stdin_or_file stdin str # Generated CLI script at /tmp/eaKwmIiilV/clico_H6FG4 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clico_H6FG4', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 6 - stdin_or_file stdin str # Subtest: stdin_or_file stdin str # Generated CLI script at /tmp/eaKwmIiilV/cliQOSgRxsr # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliQOSgRxsr', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_array' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 7 - stdin_or_file stdin str 1..7 ok 9 - cmdline_src (stdin_or_file) # Subtest: cmdline_src (stdin_or_files) ok 1 - dummy # Subtest: stdin_or_files file # Generated CLI script at /tmp/eaKwmIiilV/cli_Ke0a3hq # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli_Ke0a3hq', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array' # } # argv: [ # '/tmp/eaKwmIiilV/infile1', # '/tmp/eaKwmIiilV/infile2' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - stdin_or_files file # Subtest: stdin_or_files file (special hint arguments passed) # Generated CLI script at /tmp/eaKwmIiilV/clidiL54oyU # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clidiL54oyU', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [ # '--json', # '/tmp/eaKwmIiilV/infile1' # ] # Script's stdout: <["200","OK","a1=foo",{"func.args":{"-cmdline_src_a1":"stdin_or_files","-cmdline_srcfilenames_a1":["/tmp/eaKwmIiilV/infile1"],"a1":"foo"},"stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like ok 3 - stdout_like 1..3 ok 3 - stdin_or_files file (special hint arguments passed) # Subtest: stdin_or_files file not found # Generated CLI script at /tmp/eaKwmIiilV/cliT3NpEFA1 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliT3NpEFA1', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [ # '/tmp/eaKwmIiilV/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - stdin_or_files file not found # Subtest: stdin_or_files stdin str # Generated CLI script at /tmp/eaKwmIiilV/cliX9CSwocq # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliX9CSwocq', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - stdin_or_files stdin str # Subtest: stdin_or_files stdin str # Generated CLI script at /tmp/eaKwmIiilV/cliTKwuPFSF # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliTKwuPFSF', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 6 - stdin_or_files stdin str 1..6 ok 10 - cmdline_src (stdin_or_files) # Subtest: dry-run ok 1 - dummy # Subtest: dry-run (via env, 0) # Generated CLI script at /tmp/eaKwmIiilV/cliECHXocG4 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliECHXocG4', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - dry-run (via env, 0) # Subtest: dry-run (via env, 1) # Generated CLI script at /tmp/eaKwmIiilV/clieCF_EyDX # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clieCF_EyDX', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - dry-run (via env, 1) # Subtest: dry-run (via cmdline opt) # Generated CLI script at /tmp/eaKwmIiilV/cliVli4bJ94 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliVli4bJ94', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [ # '--dry-run' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - dry-run (via cmdline opt) 1..4 not ok 11 - dry-run # Subtest: tx ok 1 - dummy # Subtest: dry_run (using tx) (w/o) 1..0 # SKIP Has one of the exclude_tag: tx ok 2 # skip Has one of the exclude_tag: tx # Subtest: dry_run (using tx) (w/) 1..0 # SKIP Has one of the exclude_tag: tx ok 3 # skip Has one of the exclude_tag: tx 1..3 ok 12 - tx # Subtest: streaming ok 1 - dummy # Subtest: stream input, simple type, chomp on # Generated CLI script at /tmp/eaKwmIiilV/cli1_Seoh5V # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli1_Seoh5V', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/count_lines' # } # argv: [ # '/tmp/eaKwmIiilV/infile-str' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - stream input, simple type, chomp on # Subtest: stream input, simple type, chomp off # Generated CLI script at /tmp/eaKwmIiilV/clinJbR0SMu # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clinJbR0SMu', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/wc' # } # argv: [ # '/tmp/eaKwmIiilV/infile-str' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - stream input, simple type, chomp off # Subtest: stream input, json stream # Generated CLI script at /tmp/eaKwmIiilV/cli0VnjJDjg # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli0VnjJDjg', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/wc_keys' # } # argv: [ # '/tmp/eaKwmIiilV/infile-hash-json' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - stream input, json stream # Subtest: stream input, simple type, word validation 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 5 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 6 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 7 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, json stream, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 8 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream result, simple types, word validation 1..0 # SKIP Has one of the exclude_tag: validate-streaming-result ok 9 # skip Has one of the exclude_tag: validate-streaming-result # Subtest: stream result, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-result ok 10 # skip Has one of the exclude_tag: validate-streaming-result # Subtest: stream result, json stream # Generated CLI script at /tmp/eaKwmIiilV/cliG8aW55yY # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliG8aW55yY', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/produce_hashes' # } # argv: [ # '-n', # '3' # ] # Script's stdout: <{"num":1} # {"num":2} # {"num":3} # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 11 - stream result, json stream # Subtest: stream input+result, simple type, float validation # Generated CLI script at /tmp/eaKwmIiilV/cliyGW4XOQ8 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliyGW4XOQ8', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/square_nums' # } # argv: [ # '/tmp/eaKwmIiilV/infile-int' # ] # Script's stdout: <1 # 9 # 25 # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 12 - stream input+result, simple type, float validation # Subtest: stream input+result, simple type, float validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 13 # skip Has one of the exclude_tag: validate-streaming-input 1..13 ok 13 - streaming # Subtest: result metadata ok 1 - dummy # Subtest: cmdline.exit_code # Generated CLI script at /tmp/eaKwmIiilV/cliuHam1BsH # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliuHam1BsH', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/exit_code' # } # argv: [] # Script's stdout: <> # Script's stderr: <> ok 1 - exit_code 1..1 ok 2 - cmdline.exit_code # Subtest: cmdline.result # Generated CLI script at /tmp/eaKwmIiilV/cliY3UcXcyW # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliY3UcXcyW', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/result' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 3 - cmdline.result # Subtest: cmdline.default_format # Generated CLI script at /tmp/eaKwmIiilV/clieCuIJ7Es # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clieCuIJ7Es', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/default_format' # } # argv: [] # Script's stdout: <["200","OK",null,{"cmdline.default_format":"json","stream":0}] # > # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 4 - cmdline.default_format # Subtest: cmdline.default_format (overriden by cmdline opt) # Generated CLI script at /tmp/eaKwmIiilV/clikJ5CLkpG # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clikJ5CLkpG', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/default_format' # } # argv: [ # '--format', # 'text' # ] # Script's stdout: <> # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - cmdline.default_format (overriden by cmdline opt) # Subtest: cmdline.skip_format # Generated CLI script at /tmp/eaKwmIiilV/cli_Gx3_O4j # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli_Gx3_O4j', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/skip_format' # } # argv: [] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 6 - cmdline.skip_format 1..6 ok 14 - result metadata # Subtest: completion ok 1 - dummy # Subtest: self-completion works # Generated CLI script at /tmp/eaKwmIiilV/cliF8RCRG5N # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliF8RCRG5N', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/odd_even' # } # argv: [] # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > not ok 1 - exit_code not ok 2 - answer 1..2 not ok 2 - self-completion works # Subtest: completion of subcommand name # Generated CLI script at /tmp/eaKwmIiilV/cliHOFLmRbI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliHOFLmRbI', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'sc1:/Perinci/Examples/Tiny/noop', # 'sc2:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > not ok 1 - exit_code not ok 2 - answer 1..2 not ok 3 - completion of subcommand name # Subtest: completion of subcommand option # Generated CLI script at /tmp/eaKwmIiilV/cli1vIYj_RQ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cli1vIYj_RQ', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => [ # 'sc1:/Perinci/Examples/Tiny/noop', # 'sc2:/Perinci/Examples/Tiny/odd_even' # ], # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: <> # Script's stderr: <"gen_modified_sub" is not exported by the Perinci::Sub::Util module # Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Perinci/Sub/Complete.pm line 13. # Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx/blib/lib/Perinci/CmdLine/Base.pm line 543. # > not ok 1 - exit_code not ok 2 - answer 1..2 not ok 4 - completion of subcommand option 1..4 not ok 15 - completion # Subtest: env ok 1 - dummy # Subtest: env read # Generated CLI script at /tmp/eaKwmIiilV/cliiypX_yCR # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliiypX_yCR', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - env read # Subtest: turned off via --no-env # Generated CLI script at /tmp/eaKwmIiilV/cliZKt3gOSE # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/cliZKt3gOSE', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '--no-env', # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - turned off via --no-env # Subtest: attr:env_name # Generated CLI script at /tmp/eaKwmIiilV/cliEPSP3sTe # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'env_name' => 'foo_opt', # 'output_file' => '/tmp/eaKwmIiilV/cliEPSP3sTe', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - attr:env_name 1..4 not ok 16 - env # Subtest: config file ok 1 - dummy # Subtest: attr:config_dirs # Generated CLI script at /tmp/eaKwmIiilV/clilzcdq1Wk # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/clilzcdq1Wk', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - attr:config_dirs # Subtest: attr:config_filename # Generated CLI script at /tmp/eaKwmIiilV/clib55pXF_M # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'config_filename' => 'prog2.conf', # 'output_file' => '/tmp/eaKwmIiilV/clib55pXF_M', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - attr:config_filename # Subtest: common option: --no-config # Generated CLI script at /tmp/eaKwmIiilV/clitVXIkfTr # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/clitVXIkfTr', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--no-config' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - common option: --no-config # Subtest: common option: --config-path # Generated CLI script at /tmp/eaKwmIiilV/clipUxDRZpk # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/eaKwmIiilV/clipUxDRZpk', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-path', # '/tmp/eaKwmIiilV/prog.conf' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - common option: --config-path # Subtest: common option: --config-profile # Generated CLI script at /tmp/eaKwmIiilV/cliMYtXyQyC # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/cliMYtXyQyC', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=profile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - common option: --config-profile # Subtest: unknown config profile -> error # Generated CLI script at /tmp/eaKwmIiilV/clic8HeCAFP # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/clic8HeCAFP', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=foo' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 7 - unknown config profile -> error # Subtest: unknown config profile but does not read config -> ok # Generated CLI script at /tmp/eaKwmIiilV/cliiK_ZrffI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/cliiK_ZrffI', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'foo', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=bar' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 8 - unknown config profile but does not read config -> ok # Subtest: subcommand # Generated CLI script at /tmp/eaKwmIiilV/cli74xwBoUQ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/cli74xwBoUQ', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'subcommands' => [ # 'subcommand1:/Perinci/Examples/noop2' # ], # 'url' => '/Perinci/Examples/' # } # argv: [ # 'subcommand1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 9 - subcommand # Subtest: subcommand + --config-profile (old syntax) # Generated CLI script at /tmp/eaKwmIiilV/clirAEyFL0P # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/clirAEyFL0P', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog-old', # 'subcommands' => [ # 'subcommand1:/Perinci/Examples/noop2' # ], # 'url' => '/Perinci/Examples/' # } # argv: [ # '--config-profile=profile1', # 'subcommand1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 10 - subcommand + --config-profile (old syntax) # Subtest: subcommand + --config-profile # Generated CLI script at /tmp/eaKwmIiilV/cli4IoDdjUE # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/cli4IoDdjUE', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'subcommands' => [ # 'subcommand1:/Perinci/Examples/noop2' # ], # 'url' => '/Perinci/Examples/' # } # argv: [ # '--config-profile=profile1', # 'subcommand1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 11 - subcommand + --config-profile # Subtest: array-ify if argument is array # Generated CLI script at /tmp/eaKwmIiilV/clifr8B4mG5 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/clifr8B4mG5', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'sum', # 'url' => '/Perinci/Examples/sum' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 12 - array-ify if argument is array # Subtest: can also set common option # Generated CLI script at /tmp/eaKwmIiilV/cliUgFOQR8N # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/eaKwmIiilV' # ], # 'output_file' => '/tmp/eaKwmIiilV/cliUgFOQR8N', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog3', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 13 - can also set common option 1..13 not ok 17 - config file 1..17 Dubious, test returned 4 (wstat 1024, 0x400) Failed 4/17 subtests Test Summary Report ------------------- t/suite.t (Wstat: 1024 Tests: 17 Failed: 4) Failed tests: 11, 15-17 Non-zero exit status: 4 Files=5, Tests=20, 11 wallclock secs ( 0.14 usr 0.09 sys + 8.79 cusr 1.46 csys = 10.48 CPU) Result: FAIL Failed 1/5 test programs. 4/20 subtests failed. make: *** [test_dynamic] Error 4 PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/App-ShellCompleter-cpanm-0.15-HxUN3I PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz Warning: Prerequisite 'Perinci::CmdLine::Util::Config => 0' for 'PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz' failed when processing 'PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/App/ShellCompleter/cpanm.pm blib/lib/App/ShellCompleter/cpanm.pm cp bin/_cpanm blib/script/_cpanm "/home/fly1800/ap1800-297235/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/_cpanm Manifying 1 pod document Manifying 1 pod document PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'bin/_cpanm compiled ok' # at t/00-compile.t line 65. # got: '512' # expected: '0' Can't locate Complete/Setting.pm in @INC (you may need to install the Complete::Setting module) (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/App-ShellCompleter-cpanm-0.15-HxUN3I/blib/arch /home/fly1800/cpanfly-5.18/var/cpan/build/App-ShellCompleter-cpanm-0.15-HxUN3I/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-ShellCompleter-cpanm-0.15-HxUN3I/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-ShellCompleter-cpanm-0.15-HxUN3I/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .) at /home/fly1800/cpanfly-5.18/var/megalib/Complete/File.pm line 10.BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Complete/File.pm line 10.Compilation failed in require at bin/_cpanm line 14.BEGIN failed--compilation aborted at bin/_cpanm line 14. at t/00-compile.t line 74, line 4. # Looks like you failed 1 test of 2. t/00-compile.t ............ 1..2 ok 1 - App/ShellCompleter/cpanm.pm loaded ok not ok 2 - bin/_cpanm compiled ok Dubious, test returned 1 (wstat 256, 0x100) Failed 1/2 subtests t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/00-compile.t (Wstat: 256 Tests: 2 Failed: 1) Failed test: 2 Non-zero exit status: 1 Files=3, Tests=2, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.14 cusr 0.01 csys = 0.19 CPU) Result: FAIL Failed 1/3 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz one dependency not OK (Perinci::CmdLine::Util::Config); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz Running test for module 'LWP::UserAgent::Patch::FilterMirrorMaxSize' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz ok LWP-UserAgent-Patch-FilterMirror-0.05/ LWP-UserAgent-Patch-FilterMirror-0.05/META.json LWP-UserAgent-Patch-FilterMirror-0.05/LICENSE LWP-UserAgent-Patch-FilterMirror-0.05/Changes LWP-UserAgent-Patch-FilterMirror-0.05/META.yml LWP-UserAgent-Patch-FilterMirror-0.05/Makefile.PL LWP-UserAgent-Patch-FilterMirror-0.05/t/ LWP-UserAgent-Patch-FilterMirror-0.05/t/release-pod-syntax.t LWP-UserAgent-Patch-FilterMirror-0.05/t/release-pod-coverage.t LWP-UserAgent-Patch-FilterMirror-0.05/t/release-rinci.t LWP-UserAgent-Patch-FilterMirror-0.05/t/00-compile.t LWP-UserAgent-Patch-FilterMirror-0.05/README LWP-UserAgent-Patch-FilterMirror-0.05/dist.ini LWP-UserAgent-Patch-FilterMirror-0.05/lib/ LWP-UserAgent-Patch-FilterMirror-0.05/lib/LWP/ LWP-UserAgent-Patch-FilterMirror-0.05/lib/LWP/UserAgent/ LWP-UserAgent-Patch-FilterMirror-0.05/lib/LWP/UserAgent/Patch/ LWP-UserAgent-Patch-FilterMirror-0.05/lib/LWP/UserAgent/Patch/FilterMirrorMaxSize.pm LWP-UserAgent-Patch-FilterMirror-0.05/lib/LWP/UserAgent/Patch/FilterMirror.pm LWP-UserAgent-Patch-FilterMirror-0.05/MANIFEST LWP-UserAgent-Patch-FilterMirror-0.05/weaver.ini Configuring P/PE/PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for LWP::UserAgent::Patch::FilterMirror Writing MYMETA.yml and MYMETA.json PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz >>> make cp lib/LWP/UserAgent/Patch/FilterMirrorMaxSize.pm blib/lib/LWP/UserAgent/Patch/FilterMirrorMaxSize.pm cp lib/LWP/UserAgent/Patch/FilterMirror.pm blib/lib/LWP/UserAgent/Patch/FilterMirror.pm Manifying 2 pod documents PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'LWP/UserAgent/Patch/FilterMirror.pm loaded ok' # at t/00-compile.t line 38. # got: '65280' # expected: '0' "gen_modified_sub" is not exported by the Perinci::Sub::Util module Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/LWP-UserAgent-Patch-FilterMirror-0.05-Sxrg9l/blib/lib/LWP/UserAgent/Patch/FilterMirror.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/LWP-UserAgent-Patch-FilterMirror-0.05-Sxrg9l/blib/lib/LWP/UserAgent/Patch/FilterMirror.pm line 7. Compilation failed in require at -e line 1. # Failed test 'LWP/UserAgent/Patch/FilterMirrorMaxSize.pm loaded ok' # at t/00-compile.t line 38. # got: '65280' # expected: '0' "gen_modified_sub" is not exported by the Perinci::Sub::Util module Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/LWP-UserAgent-Patch-FilterMirror-0.05-Sxrg9l/blib/lib/LWP/UserAgent/Patch/FilterMirrorMaxSize.pm line 8. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/LWP-UserAgent-Patch-FilterMirror-0.05-Sxrg9l/blib/lib/LWP/UserAgent/Patch/FilterMirrorMaxSize.pm line 8. Compilation failed in require at -e line 1. # Looks like you failed 2 tests of 2. t/00-compile.t ............ 1..2 not ok 1 - LWP/UserAgent/Patch/FilterMirror.pm loaded ok not ok 2 - LWP/UserAgent/Patch/FilterMirrorMaxSize.pm loaded ok Dubious, test returned 2 (wstat 512, 0x200) Failed 2/2 subtests t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/00-compile.t (Wstat: 512 Tests: 2 Failed: 2) Failed tests: 1-2 Non-zero exit status: 2 Files=4, Tests=2, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.22 cusr 0.03 csys = 0.29 CPU) Result: FAIL Failed 1/4 test programs. 2/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz Running test for module 'Perinci::CmdLine::Util::Config' PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been prepared PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been made PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Won't repeat unsuccessful test during this command PERLANCAR/App-lcpan-0.73.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ PERLANCAR/App-lcpan-0.73.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/App-lcpan-0.73.tar.gz Warning: Prerequisite 'App::ShellCompleter::cpanm => 0' for 'PERLANCAR/App-lcpan-0.73.tar.gz' failed when processing 'PERLANCAR/App-ShellCompleter-cpanm-0.15.tar.gz' with 'make_test => NO one dependency not OK (Perinci::CmdLine::Util::Config); additionally test harness failed'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'LWP::UserAgent::Patch::FilterMirrorMaxSize => 0' for 'PERLANCAR/App-lcpan-0.73.tar.gz' failed when processing 'PERLANCAR/LWP-UserAgent-Patch-FilterMirror-0.05.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Perinci::CmdLine::Util::Config => 0' for 'PERLANCAR/App-lcpan-0.73.tar.gz' failed when processing 'PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/App/lcpan/Cmd/author_mods.pm blib/lib/App/lcpan/Cmd/author_mods.pm cp lib/App/lcpan/Cmd/scripts_from_same_dist.pm blib/lib/App/lcpan/Cmd/scripts_from_same_dist.pm cp lib/App/lcpan/Cmd/script2mod.pm blib/lib/App/lcpan/Cmd/script2mod.pm cp lib/App/lcpan/Cmd/copy_rel.pm blib/lib/App/lcpan/Cmd/copy_rel.pm cp lib/App/lcpan/Cmd/copy_mod.pm blib/lib/App/lcpan/Cmd/copy_mod.pm cp lib/App/lcpan/Manual/Cookbook.pod blib/lib/App/lcpan/Manual/Cookbook.pod cp lib/App/lcpan/Cmd/mod2dist.pm blib/lib/App/lcpan/Cmd/mod2dist.pm cp lib/App/lcpan/Cmd/dists.pm blib/lib/App/lcpan/Cmd/dists.pm cp lib/App/lcpan/Cmd/authors_by_dist_count.pm blib/lib/App/lcpan/Cmd/authors_by_dist_count.pm cp lib/App/lcpan/Cmd/authors.pm blib/lib/App/lcpan/Cmd/authors.pm cp lib/App/lcpan/Cmd/namespaces.pm blib/lib/App/lcpan/Cmd/namespaces.pm cp lib/App/lcpan/Cmd/scripts.pm blib/lib/App/lcpan/Cmd/scripts.pm cp lib/App/lcpan/Cmd/stats.pm blib/lib/App/lcpan/Cmd/stats.pm cp lib/App/lcpan/Cmd/doc.pm blib/lib/App/lcpan/Cmd/doc.pm cp lib/App/lcpan/Cmd/mods.pm blib/lib/App/lcpan/Cmd/mods.pm cp lib/App/lcpan/Cmd/author_rdeps.pm blib/lib/App/lcpan/Cmd/author_rdeps.pm cp lib/App/lcpan/Cmd/copy_script.pm blib/lib/App/lcpan/Cmd/copy_script.pm cp lib/App/lcpan/PodParser.pm blib/lib/App/lcpan/PodParser.pm cp lib/App/lcpan/Cmd/mods_from_same_dist.pm blib/lib/App/lcpan/Cmd/mods_from_same_dist.pm cp lib/App/lcpan/Cmd/authors_by_filesize.pm blib/lib/App/lcpan/Cmd/authors_by_filesize.pm cp lib/App/lcpan/Cmd/distscripts.pm blib/lib/App/lcpan/Cmd/distscripts.pm cp lib/App/lcpan/Cmd/extract_script.pm blib/lib/App/lcpan/Cmd/extract_script.pm cp lib/App/lcpan/Cmd/authors_by_rdep_count.pm blib/lib/App/lcpan/Cmd/authors_by_rdep_count.pm cp lib/LWP/UserAgent/Patch/FilterLcpan.pm blib/lib/LWP/UserAgent/Patch/FilterLcpan.pm cp lib/App/lcpan/Cmd/mods_by_rdep_count.pm blib/lib/App/lcpan/Cmd/mods_by_rdep_count.pm cp lib/App/lcpan/Cmd/dist2rel.pm blib/lib/App/lcpan/Cmd/dist2rel.pm cp lib/App/lcpan/Cmd/rels.pm blib/lib/App/lcpan/Cmd/rels.pm cp lib/App/lcpan/Cmd/author_dists.pm blib/lib/App/lcpan/Cmd/author_dists.pm cp lib/App/lcpan/Cmd/mentions.pm blib/lib/App/lcpan/Cmd/mentions.pm cp lib/App/lcpan/Cmd/contents.pm blib/lib/App/lcpan/Cmd/contents.pm cp lib/App/lcpan/Cmd/extract_rel.pm blib/lib/App/lcpan/Cmd/extract_rel.pm cp lib/App/lcpan/Cmd/update.pm blib/lib/App/lcpan/Cmd/update.pm cp lib/App/lcpan/Cmd/script2rel.pm blib/lib/App/lcpan/Cmd/script2rel.pm cp lib/App/lcpan/Cmd/mod2rel.pm blib/lib/App/lcpan/Cmd/mod2rel.pm cp lib/App/lcpan/Cmd/dists_by_dep_count.pm blib/lib/App/lcpan/Cmd/dists_by_dep_count.pm cp lib/App/lcpan/Cmd/deps.pm blib/lib/App/lcpan/Cmd/deps.pm cp lib/App/lcpan/Cmd/scripts_by_mention_count.pm blib/lib/App/lcpan/Cmd/scripts_by_mention_count.pm cp lib/App/lcpan/Cmd/authors_by_script_count.pm blib/lib/App/lcpan/Cmd/authors_by_script_count.pm cp lib/App/lcpan/Cmd/modules.pm blib/lib/App/lcpan/Cmd/modules.pm cp lib/App/lcpan/Cmd/mods_by_mention_count.pm blib/lib/App/lcpan/Cmd/mods_by_mention_count.pm cp lib/App/lcpan/Cmd/authors_by_mod_count.pm blib/lib/App/lcpan/Cmd/authors_by_mod_count.pm cp lib/App/lcpan/Cmd/reset.pm blib/lib/App/lcpan/Cmd/reset.pm cp lib/App/lcpan/Cmd/extract_mod.pm blib/lib/App/lcpan/Cmd/extract_mod.pm cp lib/App/lcpan/Cmd/authors_by_rel_count.pm blib/lib/App/lcpan/Cmd/authors_by_rel_count.pm cp lib/App/lcpan/Cmd/distmods.pm blib/lib/App/lcpan/Cmd/distmods.pm cp lib/App/lcpan/Cmd/authors_by_mod_mention_count.pm blib/lib/App/lcpan/Cmd/authors_by_mod_mention_count.pm cp lib/App/lcpan.pm blib/lib/App/lcpan.pm cp lib/App/lcpan/Cmd/author_scripts.pm blib/lib/App/lcpan/Cmd/author_scripts.pm cp lib/App/lcpan/Cmd/author_rels.pm blib/lib/App/lcpan/Cmd/author_rels.pm cp lib/App/lcpan/Cmd/releases.pm blib/lib/App/lcpan/Cmd/releases.pm cp lib/App/lcpan/Cmd/script2dist.pm blib/lib/App/lcpan/Cmd/script2dist.pm cp lib/App/lcpan/Cmd/rdeps.pm blib/lib/App/lcpan/Cmd/rdeps.pm cp bin/lcpanm blib/script/lcpanm "/home/fly1800/ap1800-297235/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lcpanm cp bin/lcpan blib/script/lcpan "/home/fly1800/ap1800-297235/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lcpan Manifying 2 pod documents Manifying 52 pod documents PERLANCAR/App-lcpan-0.73.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'LWP/UserAgent/Patch/FilterLcpan.pm loaded ok' # at t/00-compile.t line 90. # got: '65280' # expected: '0' "gen_modified_sub" is not exported by the Perinci::Sub::Util module Can't continue after import errors at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/SHARYANTO/Array/Util.pm line 11. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/megalib/Module/Patch.pm line 14. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/lib/LWP/UserAgent/Patch/FilterLcpan.pm line 11. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/lib/LWP/UserAgent/Patch/FilterLcpan.pm line 11. Compilation failed in require at -e line 1. # Failed test 'bin/lcpanm compiled ok' # at t/00-compile.t line 116. # got: '512' # expected: '0' Can't locate Perinci/CmdLine/Util/Config.pm in @INC (you may need to install the Perinci::CmdLine::Util::Config module) (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/arch /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-lcpan-0.73-sq6bgZ/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .) at bin/lcpanm line 13.BEGIN failed--compilation aborted at bin/lcpanm line 13. at t/00-compile.t line 125, line 2. # Looks like you failed 2 tests of 53. t/00-compile.t .................... 1..53 ok 1 - App/lcpan.pm loaded ok ok 2 - App/lcpan/Cmd/author_dists.pm loaded ok ok 3 - App/lcpan/Cmd/author_mods.pm loaded ok ok 4 - App/lcpan/Cmd/author_rdeps.pm loaded ok ok 5 - App/lcpan/Cmd/author_rels.pm loaded ok ok 6 - App/lcpan/Cmd/author_scripts.pm loaded ok ok 7 - App/lcpan/Cmd/authors.pm loaded ok ok 8 - App/lcpan/Cmd/authors_by_dist_count.pm loaded ok ok 9 - App/lcpan/Cmd/authors_by_filesize.pm loaded ok ok 10 - App/lcpan/Cmd/authors_by_mod_count.pm loaded ok ok 11 - App/lcpan/Cmd/authors_by_mod_mention_count.pm loaded ok ok 12 - App/lcpan/Cmd/authors_by_rdep_count.pm loaded ok ok 13 - App/lcpan/Cmd/authors_by_rel_count.pm loaded ok ok 14 - App/lcpan/Cmd/authors_by_script_count.pm loaded ok ok 15 - App/lcpan/Cmd/contents.pm loaded ok ok 16 - App/lcpan/Cmd/copy_mod.pm loaded ok ok 17 - App/lcpan/Cmd/copy_rel.pm loaded ok ok 18 - App/lcpan/Cmd/copy_script.pm loaded ok ok 19 - App/lcpan/Cmd/deps.pm loaded ok ok 20 - App/lcpan/Cmd/dist2rel.pm loaded ok ok 21 - App/lcpan/Cmd/distmods.pm loaded ok ok 22 - App/lcpan/Cmd/dists.pm loaded ok ok 23 - App/lcpan/Cmd/dists_by_dep_count.pm loaded ok ok 24 - App/lcpan/Cmd/distscripts.pm loaded ok ok 25 - App/lcpan/Cmd/doc.pm loaded ok ok 26 - App/lcpan/Cmd/extract_mod.pm loaded ok ok 27 - App/lcpan/Cmd/extract_rel.pm loaded ok ok 28 - App/lcpan/Cmd/extract_script.pm loaded ok ok 29 - App/lcpan/Cmd/mentions.pm loaded ok ok 30 - App/lcpan/Cmd/mod2dist.pm loaded ok ok 31 - App/lcpan/Cmd/mod2rel.pm loaded ok ok 32 - App/lcpan/Cmd/mods.pm loaded ok ok 33 - App/lcpan/Cmd/mods_by_mention_count.pm loaded ok ok 34 - App/lcpan/Cmd/mods_by_rdep_count.pm loaded ok ok 35 - App/lcpan/Cmd/mods_from_same_dist.pm loaded ok ok 36 - App/lcpan/Cmd/modules.pm loaded ok ok 37 - App/lcpan/Cmd/namespaces.pm loaded ok ok 38 - App/lcpan/Cmd/rdeps.pm loaded ok ok 39 - App/lcpan/Cmd/releases.pm loaded ok ok 40 - App/lcpan/Cmd/rels.pm loaded ok ok 41 - App/lcpan/Cmd/reset.pm loaded ok ok 42 - App/lcpan/Cmd/script2dist.pm loaded ok ok 43 - App/lcpan/Cmd/script2mod.pm loaded ok ok 44 - App/lcpan/Cmd/script2rel.pm loaded ok ok 45 - App/lcpan/Cmd/scripts.pm loaded ok ok 46 - App/lcpan/Cmd/scripts_by_mention_count.pm loaded ok ok 47 - App/lcpan/Cmd/scripts_from_same_dist.pm loaded ok ok 48 - App/lcpan/Cmd/stats.pm loaded ok ok 49 - App/lcpan/Cmd/update.pm loaded ok ok 50 - App/lcpan/PodParser.pm loaded ok not ok 51 - LWP/UserAgent/Patch/FilterLcpan.pm loaded ok ok 52 - bin/lcpan compiled ok not ok 53 - bin/lcpanm compiled ok Dubious, test returned 2 (wstat 512, 0x200) Failed 2/53 subtests t/release-pod-coverage.t .......... skipped: these tests are for release candidate testing t/release-pod-syntax.t ............ skipped: these tests are for release candidate testing t/release-rinci.t ................. skipped: these tests are for release candidate testing t/release-sql_schema_versioned.t .. skipped: these tests are for release candidate testing Test Summary Report ------------------- t/00-compile.t (Wstat: 512 Tests: 53 Failed: 2) Failed tests: 51, 53 Non-zero exit status: 2 Files=5, Tests=53, 3 wallclock secs ( 0.04 usr 0.03 sys + 2.41 cusr 0.43 csys = 2.91 CPU) Result: FAIL Failed 1/5 test programs. 2/53 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/App-lcpan-0.73.tar.gz 3 dependencies missing (Perinci::CmdLine::Util::Config,App::ShellCompleter::cpanm,LWP::UserAgent::Patch::FilterMirrorMaxSize); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/App-lcpan-0.73.tar.gz Running test for module 'Perinci::CmdLine::Lite' PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/Perinci-CmdLine-Lite-1.50-9i_vkx PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been prepared PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Has already been made PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz Won't repeat unsuccessful test during this command Running test for module 'App::tracepm' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-tracepm-0.19.tar.gz ok App-tracepm-0.19/ App-tracepm-0.19/bin/ App-tracepm-0.19/bin/tracepm App-tracepm-0.19/META.json App-tracepm-0.19/LICENSE App-tracepm-0.19/Changes App-tracepm-0.19/META.yml App-tracepm-0.19/Makefile.PL App-tracepm-0.19/t/ App-tracepm-0.19/t/release-pod-syntax.t App-tracepm-0.19/t/release-pod-coverage.t App-tracepm-0.19/t/release-rinci.t App-tracepm-0.19/t/00-compile.t App-tracepm-0.19/README App-tracepm-0.19/dist.ini App-tracepm-0.19/lib/ App-tracepm-0.19/lib/App/ App-tracepm-0.19/lib/App/tracepm/ App-tracepm-0.19/lib/App/tracepm/Tracer.pm App-tracepm-0.19/lib/App/tracepm.pm App-tracepm-0.19/MANIFEST App-tracepm-0.19/weaver.ini Configuring P/PE/PERLANCAR/App-tracepm-0.19.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Warning: prerequisite CHI 0 not found. Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::tracepm Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-tracepm-0.19.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-tracepm-0.19.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-tracepm-0.19.tar.gz ---- CHI [requires] Running test for module 'CHI' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/J/JS/JSWARTZ/CHI-0.60.tar.gz ok CHI-0.60/ CHI-0.60/Changes CHI-0.60/etc/ CHI-0.60/etc/bench/ CHI-0.60/etc/bench/bench.pl CHI-0.60/INSTALL CHI-0.60/lib/ CHI-0.60/lib/CHI/ CHI-0.60/lib/CHI/Benchmarks.pod CHI-0.60/lib/CHI/CacheObject.pm CHI-0.60/lib/CHI/Constants.pm CHI-0.60/lib/CHI/Driver/ CHI-0.60/lib/CHI/Driver/Base/ CHI-0.60/lib/CHI/Driver/Base/CacheContainer.pm CHI-0.60/lib/CHI/Driver/CacheCache.pm CHI-0.60/lib/CHI/Driver/Development.pod CHI-0.60/lib/CHI/Driver/FastMmap.pm CHI-0.60/lib/CHI/Driver/File.pm CHI-0.60/lib/CHI/Driver/Memory.pm CHI-0.60/lib/CHI/Driver/Metacache.pm CHI-0.60/lib/CHI/Driver/Null.pm CHI-0.60/lib/CHI/Driver/RawMemory.pm CHI-0.60/lib/CHI/Driver/Role/ CHI-0.60/lib/CHI/Driver/Role/HasSubcaches.pm CHI-0.60/lib/CHI/Driver/Role/IsSizeAware.pm CHI-0.60/lib/CHI/Driver/Role/IsSubcache.pm CHI-0.60/lib/CHI/Driver/Role/Universal.pm CHI-0.60/lib/CHI/Driver.pm CHI-0.60/lib/CHI/Serializer/ CHI-0.60/lib/CHI/Serializer/JSON.pm CHI-0.60/lib/CHI/Serializer/Storable.pm CHI-0.60/lib/CHI/Stats.pm CHI-0.60/lib/CHI/t/ CHI-0.60/lib/CHI/t/Bugs.pm CHI-0.60/lib/CHI/t/Config.pm CHI-0.60/lib/CHI/t/Constants.pm CHI-0.60/lib/CHI/t/Driver/ CHI-0.60/lib/CHI/t/Driver/CacheCache.pm CHI-0.60/lib/CHI/t/Driver/FastMmap.pm CHI-0.60/lib/CHI/t/Driver/File/ CHI-0.60/lib/CHI/t/Driver/File/DepthZero.pm CHI-0.60/lib/CHI/t/Driver/File.pm CHI-0.60/lib/CHI/t/Driver/Memory.pm CHI-0.60/lib/CHI/t/Driver/NonMoose.pm CHI-0.60/lib/CHI/t/Driver/RawMemory.pm CHI-0.60/lib/CHI/t/Driver/Subcache/ CHI-0.60/lib/CHI/t/Driver/Subcache/l1_cache.pm CHI-0.60/lib/CHI/t/Driver/Subcache/mirror_cache.pm CHI-0.60/lib/CHI/t/Driver/Subcache.pm CHI-0.60/lib/CHI/t/Driver.pm CHI-0.60/lib/CHI/t/GetError.pm CHI-0.60/lib/CHI/t/Initialize.pm CHI-0.60/lib/CHI/t/Null.pm CHI-0.60/lib/CHI/t/RequiredModules.pm CHI-0.60/lib/CHI/t/Sanity.pm CHI-0.60/lib/CHI/t/SetError.pm CHI-0.60/lib/CHI/t/Subcache.pm CHI-0.60/lib/CHI/t/Subclass.pm CHI-0.60/lib/CHI/t/Util.pm CHI-0.60/lib/CHI/Test/ CHI-0.60/lib/CHI/Test/Class.pm CHI-0.60/lib/CHI/Test/Driver/ CHI-0.60/lib/CHI/Test/Driver/NonMoose.pm CHI-0.60/lib/CHI/Test/Driver/Readonly.pm CHI-0.60/lib/CHI/Test/Driver/Role/ CHI-0.60/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm CHI-0.60/lib/CHI/Test/Driver/Writeonly.pm CHI-0.60/lib/CHI/Test/Util.pm CHI-0.60/lib/CHI/Test.pm CHI-0.60/lib/CHI/Types.pm CHI-0.60/lib/CHI/Util.pm CHI-0.60/lib/CHI.pm CHI-0.60/LICENSE CHI-0.60/Makefile.PL CHI-0.60/MANIFEST CHI-0.60/META.json CHI-0.60/META.yml CHI-0.60/perltidy.LOG CHI-0.60/README CHI-0.60/t/ CHI-0.60/t/00-load.t CHI-0.60/t/author-03-pod.t CHI-0.60/t/author-file-driver.t CHI-0.60/t/author-no-data-serializer.t CHI-0.60/t/author-RequiredModules.t CHI-0.60/t/Bugs.t CHI-0.60/t/Config.t CHI-0.60/t/Constants.t CHI-0.60/t/Driver-Memory.t CHI-0.60/t/Driver-RawMemory.t CHI-0.60/t/GetError.t CHI-0.60/t/Initialize.t CHI-0.60/t/permcache/ CHI-0.60/t/permcache/Default/ CHI-0.60/t/permcache/Default/0/ CHI-0.60/t/permcache/Default/0/4/ CHI-0.60/t/permcache/Default/0/4/1.dat CHI-0.60/t/permcache/Default/0/4/empty.dat CHI-0.60/t/permcache/Default/1/ CHI-0.60/t/permcache/Default/1/a/ CHI-0.60/t/permcache/Default/1/a/+20+21+22+23+24+25+26+27+28+29+2a+2b+2c-+2e+2f09+3a+3b+3c=+3e+3f+40AZ+5b+5c+5d+5e_+60az+7b+7c+7d~+f0.dat CHI-0.60/t/permcache/Default/2/ CHI-0.60/t/permcache/Default/2/3/ CHI-0.60/t/permcache/Default/2/3/+0a.dat CHI-0.60/t/permcache/Default/6/ CHI-0.60/t/permcache/Default/6/3/ CHI-0.60/t/permcache/Default/6/3/0.dat CHI-0.60/t/permcache/Default/7/ CHI-0.60/t/permcache/Default/7/7/ CHI-0.60/t/permcache/Default/7/7/+20.dat CHI-0.60/t/permcache/Default/8/ CHI-0.60/t/permcache/Default/8/1/ CHI-0.60/t/permcache/Default/8/1/a.dat CHI-0.60/t/permcache/Default/b/ CHI-0.60/t/permcache/Default/b/6/ CHI-0.60/t/permcache/Default/b/6/medium.dat CHI-0.60/t/release-dependent.t CHI-0.60/t/Sanity.t CHI-0.60/t/set_permcache.pl CHI-0.60/t/SetError.t CHI-0.60/t/smoke-Driver-CacheCache.t CHI-0.60/t/smoke-Driver-FastMmap.t CHI-0.60/t/smoke-Driver-File-DepthZero.t CHI-0.60/t/smoke-Driver-File.t CHI-0.60/t/smoke-Driver-NonMoose.t CHI-0.60/t/smoke-Driver-Subcache-l1_cache.t CHI-0.60/t/smoke-Driver-Subcache-mirror_cache.t CHI-0.60/t/smoke-Null.t CHI-0.60/t/Subcache.t CHI-0.60/t/Subclass.t CHI-0.60/t/Util.t Configuring J/JS/JSWARTZ/CHI-0.60.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for CHI Writing MYMETA.yml and MYMETA.json JSWARTZ/CHI-0.60.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz ---- Unsatisfied dependencies detected during ---- ---- JSWARTZ/CHI-0.60.tar.gz ---- Test::Class [build_requires] Running test for module 'Test::Class' Checksum for /home/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/E/ET/ETHER/Test-Class-0.50.tar.gz ok Test-Class-0.50/ Test-Class-0.50/Changes Test-Class-0.50/MANIFEST Test-Class-0.50/META.json Test-Class-0.50/META.yml Test-Class-0.50/Makefile.PL Test-Class-0.50/README Test-Class-0.50/lib/ Test-Class-0.50/t/ Test-Class-0.50/xt/ Test-Class-0.50/xt/documented.t Test-Class-0.50/xt/meta.t Test-Class-0.50/xt/perlcritic.t Test-Class-0.50/xt/perlcriticrc Test-Class-0.50/xt/pmv.t Test-Class-0.50/xt/pod.t Test-Class-0.50/xt/spelling.t Test-Class-0.50/t/00-load.t Test-Class-0.50/t/20-load-classes.t Test-Class-0.50/t/21-load-subclassed.t Test-Class-0.50/t/TestClassLoadSubclass.pm Test-Class-0.50/t/Tests.t Test-Class-0.50/t/_new.t Test-Class-0.50/t/bad-autoloads.t Test-Class-0.50/t/bailout.t Test-Class-0.50/t/builder.t Test-Class-0.50/t/compile.t Test-Class-0.50/t/current_method.t Test-Class-0.50/t/diag_on_failure.t Test-Class-0.50/t/die-in-setup.t Test-Class-0.50/t/die_before_plan.t Test-Class-0.50/t/expected_tests.t Test-Class-0.50/t/fail1.t Test-Class-0.50/t/fail2.t Test-Class-0.50/t/fail3.t Test-Class-0.50/t/filter.t Test-Class-0.50/t/filter_bad_filter.t Test-Class-0.50/t/filter_fixtures.t Test-Class-0.50/t/filter_fixtures_only.t Test-Class-0.50/t/filter_multiple.t Test-Class-0.50/t/header.t Test-Class-0.50/t/late_header.t Test-Class-0.50/t/methodinfo.t Test-Class-0.50/t/named_test.t Test-Class-0.50/t/num_method_tests.t Test-Class-0.50/t/num_tests.t Test-Class-0.50/t/override.t Test-Class-0.50/t/rt15870.t Test-Class-0.50/t/rt17264.t Test-Class-0.50/t/run_all_tests.t Test-Class-0.50/t/runtests.t Test-Class-0.50/t/runtests_die.t Test-Class-0.50/t/runtests_die_empty.t Test-Class-0.50/t/runtests_die_nearlyempty.t Test-Class-0.50/t/runtests_extra.t Test-Class-0.50/t/runtests_noplan.t Test-Class-0.50/t/runtests_of.t Test-Class-0.50/t/runtests_result.t Test-Class-0.50/t/runtests_return.t Test-Class-0.50/t/runtests_trailing.t Test-Class-0.50/t/runtests_with_wrong_class.t Test-Class-0.50/t/show_plan_in_shutdown.t Test-Class-0.50/t/skip1.t Test-Class-0.50/t/skip2.t Test-Class-0.50/t/skip_class_reason.t Test-Class-0.50/t/skip_empty_classes.t Test-Class-0.50/t/spaces.t Test-Class-0.50/t/startup.t Test-Class-0.50/t/startup_that_dies.t Test-Class-0.50/t/teardown-when-test-dies.t Test-Class-0.50/t/test-libs/ Test-Class-0.50/t/test_classes.t Test-Class-0.50/t/test_deep.t Test-Class-0.50/t/test_method.t Test-Class-0.50/t/test_verbose.t Test-Class-0.50/t/todo.t Test-Class-0.50/t/test-libs/fail/ Test-Class-0.50/t/test-libs/lib1/ Test-Class-0.50/t/test-libs/lib2/ Test-Class-0.50/t/test-libs/lib3/ Test-Class-0.50/t/test-libs/lib3/Tests/ Test-Class-0.50/t/test-libs/lib3/Tests/Bad1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/ Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Bad2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Good3.pm Test-Class-0.50/t/test-libs/lib2/MyTest/ Test-Class-0.50/t/test-libs/lib2/MyTest/Baz.pm Test-Class-0.50/t/test-libs/lib1/Tests/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo.pm Test-Class-0.50/t/test-libs/lib1/Tests/Foo/Bar.pm Test-Class-0.50/t/test-libs/fail/MyFail.pm Test-Class-0.50/lib/Test/ Test-Class-0.50/lib/Test/Class/ Test-Class-0.50/lib/Test/Class.pm Test-Class-0.50/lib/Test/Class/Load.pm /bin/tar: Read 4608 bytes from - Test-Class-0.50/lib/Test/Class/MethodInfo.pm Configuring E/ET/ETHER/Test-Class-0.50.tar.gz with Makefile.PL >>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /home/fly1800/cpanfly-5.18/var/megalib Want /home/fly1800/ap1800-297235/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Test::Class Writing MYMETA.yml and MYMETA.json ETHER/Test-Class-0.50.tar.gz /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL -- OK Running make for E/ET/ETHER/Test-Class-0.50.tar.gz >>> make cp lib/Test/Class/MethodInfo.pm blib/lib/Test/Class/MethodInfo.pm cp lib/Test/Class/Load.pm blib/lib/Test/Class/Load.pm cp lib/Test/Class.pm blib/lib/Test/Class.pm Manifying 3 pod documents ETHER/Test-Class-0.50.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Test::Class::Load 0.50, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static t/00-load.t .................... 1..1 ok 1 - use Test::Class::Load; ok t/20-load-classes.t ............ 1..14 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should tests in subdirectories ok 3 - ... and the methods should work correctly ok 4 - ... even if they are called from subclasses ok 5 - ... or they have their own methods ok 6 - Trying to load multiple lib paths should succeed ok 7 - Top level directories should be loaded even with multiple libs ok 8 - ... as should tests in subdirectories ok 9 - ... and the methods should work correctly ok 10 - ... even if they are called from subclasses ok 11 - ... or they have their own methods ok 12 - And secondary libs should be loaded ok 13 - ... and their methods should also work correctly ok 14 - Trying to load a bad module fails ok t/21-load-subclassed.t ......... 1..7 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should classes in subdirectories ok 3 - Filtered out classes in top level directories should *not* be loaded ok 4 - Filtered out classes in subdirectories should *not* be loaded ok 5 - Class Tests::Good1 method work as expected ok 6 - Class Tests::Good2 method work as expected ok 7 - Class Tests::Subdir::Good3 method work as expected ok t/_new.t ....................... 1..6 ok 1 - use Test::Class; ok 2 - An object of class 'Foo' isa 'Test::Class' ok 3 - key/value set ok 4 - An object of class 'Foo' isa 'Test::Class' ok 5 - prototype key/value set ok 6 - new key/value set ok t/bad-autoloads.t .............. 1..2 ok 1 - use Test::Class; ok 2 - avoided warnings from Contextual::Return::Value ok t/bailout.t .................... 1..2 ok 1 - bailout works ok 2 - exit value okay ok t/builder.t .................... 1..1 ok 1 - builder ok t/compile.t .................... 1..2 ok 1 - cannot test anon sub ok 2 - bad number detected ok # # Local::Test->test t/current_method.t ............. 1..4 ok 1 - current_method in setup ok 2 - current_method in method ok 3 - current_method in teardown ok 4 - current_test outside runtests ok t/diag_on_failure.t ............ 1..1 ok 1 - we show the test class and method name on test failure ok t/die-in-setup.t ............... 1..1 ok 1 - die in setup caused test method to fail ok t/die_before_plan.t ............ 1..1 ok 1 - die before plan ok t/expected_tests.t ............. 1..10 ok 1 - all set ok 2 - no_plan setup ok 3 - no_plan test ok 4 - no_plan teardown ok 5 - no_plan startup ok 6 - no_plan shutdown ok 7 - expected_test_of ok 8 - no_plan expected_test_of ok 9 - bad test class ok 10 - undef test class ok t/fail1.t ...................... 1..2 ok 1 - FAIL_ALL with plan ok 2 - exit value okay ok t/fail2.t ...................... 1..2 ok 1 - fail2 ok 2 - exit value okay ok t/fail3.t ...................... ok 1 - FAIL_ALL with no plan ok 2 - exit value okay 1..2 ok # # Foo->test_run t/filter.t ..................... 1..1 ok 1 - test_run not filtered, so is run ok t/filter_bad_filter.t .......... 1..1 ok 1 - error on non-coderef filter ok # # Foo->test_should_run t/filter_fixtures.t ............ 1..5 ok 1 - startup test is run, even though matches filter ok 2 - setup test is run, even though matches filter ok 3 - should run, due to not matching filter ok 4 - teardown test is run, even though matches filter ok 5 - shutdown test is run, even though matches filter ok t/filter_fixtures_only.t ....... 1..1 ok 1 - setup/teardown not run when no test methods ok # # Foo->test_another_not_matching # # Foo->test_not_filtered t/filter_multiple.t ............ 1..2 ok 1 - test_another_not_matching doesn't meet any filters, so is run ok 2 - test_not_filtered doesn't meet any filters, so is run ok t/header.t ..................... ok 1 - no duplicate headers 1..1 ok # # Local::Test->test t/late_header.t ................ 1..2 ok 1 - test number set ok 2 - builder expected tests set ok t/methodinfo.t ................. ok 1 - use Test::Class::MethodInfo; ok 2 - An object of class 'Test::Class::MethodInfo' isa 'Test::Class::MethodInfo' ok 3 - method type is test by default ok 4 - test methods default to 1 test 1..4 ok t/named_test.t ................. ok 1 - test names set to method name by default 1..1 ok # # Bar->no_plan_test # # Bar->no_plan_test2 # # Bar->two_tests t/num_method_tests.t ........... 1..19 ok 1 - fixed num tests ok 2 - no_plan tests ok 3 - cannot use non-method ok 4 - cannot update illegal value ok 5 - updated legal value ok 6 - update worked ok 7 - updated extended ok 8 - update worked ok 9 - extended method okay ok 10 - class expected_tests ok 11 - object expected_tests ok 12 - num_method_tests dies outside test class ok 13 - just passing ok 14 - no_plan_test just passing 1 ok 15 - no_plan_test just passing 2 ok 16 - no_plan_test2 just passing 1 ok 17 - no_plan_test2 just passing 2 ok 18 - two_tests just passing 1 ok 19 - two_tests just passing 2 ok # # Foo->test_num_tests # # Foo->test_num_tests t/num_tests.t .................. 1..4 ok 1 - num_tests access okay ok 2 - num_tests set okay ok 3 - num_tests access okay ok 4 - num_tests set okay ok t/override.t ................... 1..1 ok 1 - cannot override a public method with a test method ok t/rt15870.t .................... 1..1 ok 1 - sensible error if new() is overridden ok t/rt17264.t .................... 1..1 ok 1 - we figured out that we loaded Test::Class too late ok # # A::Test->setup t/run_all_tests.t .............. 1..5 ok 1 - Test::Class->SKIP_CLASS default ok 2 - Base::Test->SKIP_CLASS overridden ok 3 - A::Test->SKIP_CLASS default ok 4 - non skipping test class run as expected ok 5 - runtests skipped classes with SKIP_CLASS set ok # # Bar->test1 # # Bar->test2 t/runtests.t ................... 1..18 ok 1 - initialise2: methods ran in order ok 2 - test1: initialise1 ran once ok 3 - test1: initialise2 ran once ok 4 - test1: first test running ok 5 - test1: teardown not run ok 6 - teardown1: teardown run for every test ok 7 - teardown1: teardown run for every initialise1 ok 8 - teardown1: teardown run for every initialise2 ok 9 - teardown1: setup run for every test ok 10 - initialise2: methods ran in order ok 11 - test2: initialise1 ran twice ok 12 - test2: initialise2 ran twice ok 13 - test2: second test running ok 14 - test2: teardown ran once ok 15 - teardown1: teardown run for every test ok 16 - teardown1: teardown run for every initialise1 ok 17 - teardown1: teardown run for every initialise2 ok 18 - teardown1: setup run for every test ok t/runtests_die.t ............... 1..1 ok 1 - early die handled ok t/runtests_die_empty.t ......... 1..1 ok 1 - we can handle an exception that stringifies to the empty string ok t/runtests_die_nearlyempty.t ... 1..1 ok 1 - early die with nearly-empty messages handled ok t/runtests_extra.t ............. 1..1 ok 1 - extra test detected ok # # Foo->set_tests # # Foo->undef_tests t/runtests_noplan.t ............ ok 1 - this should pass ok 2 - runtime test 1 ok 3 - runtime test 2 ok 4 - expected number of tests ran 1..4 ok # # Tests1->test # # Tests2->test t/runtests_of.t ................ 1..3 ok 1 - Tests1 test ok 2 - Tests2 test ok 3 - correct number of tests ok t/runtests_result.t ............ 1..4 ok 1 - single failure ran okay ok 2 - failure detected ok 3 - a successful test ok 4 - success detected ok t/runtests_return.t ............ 1..2 ok 1 - early return handled (skip) ok 2 - early return handled (fail) ok t/runtests_trailing.t .......... 1..1 ok 1 - trailing expection detected ok t/runtests_with_wrong_class.t .. 1..2 ok 1 - use Test::Class; ok 2 - runtests dies if we are given something that is not a test class ok # # My::Test->test t/show_plan_in_shutdown.t ...... 1..2 ok 1 - passing test to force shutdown method to run ok 2 - shutdown method has run ok t/skip1.t ...................... 1..1 ok 1 - SKIP_ALL called skip_all ok # Failed test 'SKIP_ALL' # at t/skip2.t line 40. # (in Local::Test->_only) # STDERR is: # # # # Local::Test->test # # not: # # as expected t/skip2.t ...................... 1..4 not ok 1 - SKIP_ALL ok 2 - exit ok ok 3 - make the plan happy ok 4 - make the plan happy Failed 1/4 subtests t/skip_class_reason.t .......... 1..3 # Running under perl version 5.018000 for linux # Current time local: Mon Feb 15 08:21:35 2016 # Current time GMT: Mon Feb 15 16:21:35 2016 # Using Test.pm version 1.26 ok 1 ok 2 ok 3 ok # # Bar::Test->the_test t/skip_empty_classes.t ......... 1..5 ok 1 - startup run ok 2 - setup run ok 3 - the_test has been run ok 4 - teardown run ok 5 - shutdown run ok t/spaces.t ..................... ok 1 - can have spaces around attributes 1..1 ok # # Foo::Test->test1 # # Foo::Test->test2 t/startup.t .................... 1..15 ok 1 - called start1 ok 2 - called start2 ok 3 - called setup1 ok 4 - called setup2 ok 5 - called test1 ok 6 - called tear1 ok 7 - called tear2 ok 8 - called setup1 ok 9 - called setup2 ok 10 - called test2 ok 11 - called tear1 ok 12 - called tear2 ok 13 - called end1 ok 14 - called end2 ok 15 - all expected methods ran ok t/startup_that_dies.t .......... 1..1 ok 1 - exception in startup method causes all tests to be skipped ok # Failed test 'exception in method, but teardown is still run' # at t/teardown-when-test-dies.t line 29. # STDERR is: # # # # TeardownWhenTestDies->my_test_method # # Failed test 'my_test_method died (oops! at t/teardown-when-test-dies.t line 15.)' # # at t/teardown-when-test-dies.t line 28. # # (in TeardownWhenTestDies->my_test_method) # # not: # /#\s+Failed\ test.*?\n?.*?at\ t\/teardown\-when\-test\-dies\.t line 28.*\n?/ # # (in TeardownWhenTestDies->my_test_method) # # as expected t/teardown-when-test-dies.t .... 1..1 not ok 1 - exception in method, but teardown is still run Failed 1/1 subtests t/test_classes.t ............... 1..1 ok 1 - _test_classes deals with undef values ok t/test_deep.t .................. 1..1 ok 1 - Test::Deep is not included as a test class, even though isa always returns true ok t/test_method.t ................ 1..4 ok 1 - $ENV{TEST_METHOD} with an invalid regex should die ok 2 - no TEST_METHOD runs all tests ok 3 - single match just runs one test ok 4 - two matches run both tests ok t/test_verbose.t ............... 1..1 ok 1 - TEST_VERBOSE outputs method diagnostic ok # # My::Test->Tests_attribute_default_number_of_tests # # My::Test->Tests_attribute_set_number_of_tests t/Tests.t ...................... 1..2 ok 1 - Tests attribute default number of tests ok 2 - Tests attribute set number of tests ok # Test::More: 1.001009 t/todo.t ....................... 1..2 ok 1 - todo tests work ok 2 - todo_test should run 1 test ok Test Summary Report ------------------- t/skip2.t (Wstat: 0 Tests: 4 Failed: 1) Failed test: 1 t/teardown-when-test-dies.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Files=57, Tests=189, 5 wallclock secs ( 0.20 usr 0.11 sys + 3.63 cusr 0.48 csys = 4.42 CPU) Result: FAIL Failed 2/57 test programs. 2/189 subtests failed. make: *** [test_dynamic] Error 255 ETHER/Test-Class-0.50.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ETHER/Test-Class-0.50.tar.gz JSWARTZ/CHI-0.60.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct JSWARTZ/CHI-0.60.tar.gz Has already been prepared Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz Warning: Prerequisite 'Test::Class => 0' for 'JSWARTZ/CHI-0.60.tar.gz' failed when processing 'ETHER/Test-Class-0.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/CHI/Benchmarks.pod blib/lib/CHI/Benchmarks.pod cp lib/CHI/Driver/Metacache.pm blib/lib/CHI/Driver/Metacache.pm cp lib/CHI.pm blib/lib/CHI.pm cp lib/CHI/Test/Class.pm blib/lib/CHI/Test/Class.pm cp lib/CHI/t/Driver/Memory.pm blib/lib/CHI/t/Driver/Memory.pm cp lib/CHI/t/Null.pm blib/lib/CHI/t/Null.pm cp lib/CHI/t/Bugs.pm blib/lib/CHI/t/Bugs.pm cp lib/CHI/Driver/Base/CacheContainer.pm blib/lib/CHI/Driver/Base/CacheContainer.pm cp lib/CHI/Driver/FastMmap.pm blib/lib/CHI/Driver/FastMmap.pm cp lib/CHI/t/Util.pm blib/lib/CHI/t/Util.pm cp lib/CHI/Driver/Role/IsSizeAware.pm blib/lib/CHI/Driver/Role/IsSizeAware.pm cp lib/CHI/Test/Driver/Writeonly.pm blib/lib/CHI/Test/Driver/Writeonly.pm cp lib/CHI/Test/Driver/Role/CheckKeyValidity.pm blib/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm cp lib/CHI/t/Constants.pm blib/lib/CHI/t/Constants.pm cp lib/CHI/t/Driver/File.pm blib/lib/CHI/t/Driver/File.pm cp lib/CHI/Test/Driver/Readonly.pm blib/lib/CHI/Test/Driver/Readonly.pm cp lib/CHI/t/RequiredModules.pm blib/lib/CHI/t/RequiredModules.pm cp lib/CHI/t/Driver/Subcache/l1_cache.pm blib/lib/CHI/t/Driver/Subcache/l1_cache.pm cp lib/CHI/Driver/Memory.pm blib/lib/CHI/Driver/Memory.pm cp lib/CHI/Test/Driver/NonMoose.pm blib/lib/CHI/Test/Driver/NonMoose.pm cp lib/CHI/Driver/CacheCache.pm blib/lib/CHI/Driver/CacheCache.pm cp lib/CHI/Test/Util.pm blib/lib/CHI/Test/Util.pm cp lib/CHI/t/Driver/FastMmap.pm blib/lib/CHI/t/Driver/FastMmap.pm cp lib/CHI/Driver/Development.pod blib/lib/CHI/Driver/Development.pod cp lib/CHI/t/SetError.pm blib/lib/CHI/t/SetError.pm cp lib/CHI/t/Sanity.pm blib/lib/CHI/t/Sanity.pm cp lib/CHI/CacheObject.pm blib/lib/CHI/CacheObject.pm cp lib/CHI/t/GetError.pm blib/lib/CHI/t/GetError.pm cp lib/CHI/Test.pm blib/lib/CHI/Test.pm cp lib/CHI/t/Subclass.pm blib/lib/CHI/t/Subclass.pm cp lib/CHI/Serializer/Storable.pm blib/lib/CHI/Serializer/Storable.pm cp lib/CHI/t/Config.pm blib/lib/CHI/t/Config.pm cp lib/CHI/Driver/RawMemory.pm blib/lib/CHI/Driver/RawMemory.pm cp lib/CHI/Driver/Role/Universal.pm blib/lib/CHI/Driver/Role/Universal.pm cp lib/CHI/Util.pm blib/lib/CHI/Util.pm cp lib/CHI/Serializer/JSON.pm blib/lib/CHI/Serializer/JSON.pm cp lib/CHI/Constants.pm blib/lib/CHI/Constants.pm cp lib/CHI/t/Driver.pm blib/lib/CHI/t/Driver.pm cp lib/CHI/t/Driver/Subcache/mirror_cache.pm blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm cp lib/CHI/Types.pm blib/lib/CHI/Types.pm cp lib/CHI/t/Driver/CacheCache.pm blib/lib/CHI/t/Driver/CacheCache.pm cp lib/CHI/Driver/Role/IsSubcache.pm blib/lib/CHI/Driver/Role/IsSubcache.pm cp lib/CHI/Stats.pm blib/lib/CHI/Stats.pm cp lib/CHI/t/Driver/NonMoose.pm blib/lib/CHI/t/Driver/NonMoose.pm cp lib/CHI/t/Initialize.pm blib/lib/CHI/t/Initialize.pm cp lib/CHI/Driver/File.pm blib/lib/CHI/Driver/File.pm cp lib/CHI/Driver.pm blib/lib/CHI/Driver.pm cp lib/CHI/t/Subcache.pm blib/lib/CHI/t/Subcache.pm cp lib/CHI/t/Driver/Subcache.pm blib/lib/CHI/t/Driver/Subcache.pm cp lib/CHI/Driver/Null.pm blib/lib/CHI/Driver/Null.pm cp lib/CHI/t/Driver/File/DepthZero.pm blib/lib/CHI/t/Driver/File/DepthZero.pm cp lib/CHI/t/Driver/RawMemory.pm blib/lib/CHI/t/Driver/RawMemory.pm cp lib/CHI/Driver/Role/HasSubcaches.pm blib/lib/CHI/Driver/Role/HasSubcaches.pm Manifying 15 pod documents JSWARTZ/CHI-0.60.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing CHI 0.60, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static t/00-load.t ............................. 1..1 ok 1 - use CHI; ok t/author-03-pod.t ....................... skipped: these tests are for testing by the author t/author-file-driver.t .................. skipped: these tests are for testing by the author t/author-no-data-serializer.t ........... skipped: these tests are for testing by the author t/author-RequiredModules.t .............. skipped: these tests are for testing by the author Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Bugs.pm line 7. Compilation failed in require at t/Bugs.t line 2. BEGIN failed--compilation aborted at t/Bugs.t line 2. t/Bugs.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Config.pm line 8. Compilation failed in require at t/Config.t line 2. BEGIN failed--compilation aborted at t/Config.t line 2. t/Config.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Constants.pm line 6. Compilation failed in require at t/Constants.t line 2. BEGIN failed--compilation aborted at t/Constants.t line 2. t/Constants.t ........................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at t/Driver-Memory.t line 2. BEGIN failed--compilation aborted at t/Driver-Memory.t line 2. t/Driver-Memory.t ....................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/RawMemory.pm line 7. Compilation failed in require at t/Driver-RawMemory.t line 2. BEGIN failed--compilation aborted at t/Driver-RawMemory.t line 2. t/Driver-RawMemory.t .................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/GetError.pm line 7. Compilation failed in require at t/GetError.t line 2. BEGIN failed--compilation aborted at t/GetError.t line 2. t/GetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Initialize.pm line 7. Compilation failed in require at t/Initialize.t line 2. BEGIN failed--compilation aborted at t/Initialize.t line 2. t/Initialize.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/release-dependent.t ................... skipped: these tests are for release candidate testing Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Sanity.pm line 6. Compilation failed in require at t/Sanity.t line 2. BEGIN failed--compilation aborted at t/Sanity.t line 2. t/Sanity.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/SetError.pm line 7. Compilation failed in require at t/SetError.t line 2. BEGIN failed--compilation aborted at t/SetError.t line 2. t/SetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/CacheCache.pm line 7. Compilation failed in require at t/smoke-Driver-CacheCache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-CacheCache.t line 10. t/smoke-Driver-CacheCache.t ............. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/FastMmap.pm line 8. Compilation failed in require at t/smoke-Driver-FastMmap.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-FastMmap.t line 10. t/smoke-Driver-FastMmap.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/File/DepthZero.pm line 8. Compilation failed in require at t/smoke-Driver-File-DepthZero.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File-DepthZero.t line 10. t/smoke-Driver-File-DepthZero.t ......... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at t/smoke-Driver-File.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File.t line 10. t/smoke-Driver-File.t ................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/NonMoose.pm line 6. Compilation failed in require at t/smoke-Driver-NonMoose.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-NonMoose.t line 10. t/smoke-Driver-NonMoose.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Subcache/l1_cache.pm line 8. Compilation failed in require at t/smoke-Driver-Subcache-l1_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-l1_cache.t line 10. t/smoke-Driver-Subcache-l1_cache.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm line 7. Compilation failed in require at t/smoke-Driver-Subcache-mirror_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-mirror_cache.t line 10. t/smoke-Driver-Subcache-mirror_cache.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Null.pm line 6. Compilation failed in require at t/smoke-Null.t line 10. BEGIN failed--compilation aborted at t/smoke-Null.t line 10. t/smoke-Null.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Subcache.pm line 5. Compilation failed in require at t/Subcache.t line 2. BEGIN failed--compilation aborted at t/Subcache.t line 2. t/Subcache.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Subclass.pm line 6. Compilation failed in require at t/Subclass.t line 2. BEGIN failed--compilation aborted at t/Subclass.t line 2. t/Subclass.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .). at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 100. ...propagated at /home/fly1800/cpanfly-5.18/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/CHI-0.60-OfRlct/blib/lib/CHI/t/Util.pm line 9. Compilation failed in require at t/Util.t line 2. BEGIN failed--compilation aborted at t/Util.t line 2. t/Util.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Test Summary Report ------------------- t/Bugs.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Config.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Constants.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-Memory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-RawMemory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/GetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Initialize.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Sanity.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/SetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-CacheCache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-FastMmap.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File-DepthZero.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-NonMoose.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-l1_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-mirror_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Null.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subcache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subclass.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Util.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=26, Tests=1, 5 wallclock secs ( 0.09 usr 0.05 sys + 4.91 cusr 0.53 csys = 5.58 CPU) Result: FAIL Failed 20/26 test programs. 0/1 subtests failed. make: *** [test_dynamic] Error 2 JSWARTZ/CHI-0.60.tar.gz one dependency not OK (Test::Class); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JSWARTZ/CHI-0.60.tar.gz PERLANCAR/App-tracepm-0.19.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/App-tracepm-0.19-4eSv5g PERLANCAR/App-tracepm-0.19.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/App-tracepm-0.19.tar.gz Warning: Prerequisite 'CHI => 0' for 'PERLANCAR/App-tracepm-0.19.tar.gz' failed when processing 'JSWARTZ/CHI-0.60.tar.gz' with 'make_test => NO one dependency not OK (Test::Class); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/App/tracepm.pm blib/lib/App/tracepm.pm cp lib/App/tracepm/Tracer.pm blib/lib/App/tracepm/Tracer.pm cp bin/tracepm blib/script/tracepm "/home/fly1800/ap1800-297235/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/tracepm Manifying 1 pod document Manifying 2 pod documents PERLANCAR/App-tracepm-0.19.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..3 ok 1 - App/tracepm.pm loaded ok ok 2 - App/tracepm/Tracer.pm loaded ok ok 3 - bin/tracepm compiled ok ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=4, Tests=3, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.20 cusr 0.03 csys = 0.28 CPU) Result: PASS PERLANCAR/App-tracepm-0.19.tar.gz Tests succeeded but one dependency not OK (CHI) PERLANCAR/App-tracepm-0.19.tar.gz [dependencies] -- NA PERLANCAR/App-depak-0.51.tar.gz Has already been unwrapped into directory /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA PERLANCAR/App-depak-0.51.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/App-depak-0.51.tar.gz Warning: Prerequisite 'App::lcpan => 0.18' for 'PERLANCAR/App-depak-0.51.tar.gz' failed when processing 'PERLANCAR/App-lcpan-0.73.tar.gz' with 'make_test => NO 3 dependencies missing (Perinci::CmdLine::Util::Config,App::ShellCompleter::cpanm,LWP::UserAgent::Patch::FilterMirrorMaxSize); additionally test harness failed'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'App::tracepm => 0.17' for 'PERLANCAR/App-depak-0.51.tar.gz' failed when processing 'PERLANCAR/App-tracepm-0.19.tar.gz' with 'make_test => NO one dependency not OK (CHI)'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Perinci::CmdLine::Lite => 0.49' for 'PERLANCAR/App-depak-0.51.tar.gz' failed when processing 'PERLANCAR/Perinci-CmdLine-Lite-1.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/CmdLine/depak.pm blib/lib/Perinci/CmdLine/depak.pm cp lib/App/depak.pm blib/lib/App/depak.pm cp bin/depak blib/script/depak "/home/fly1800/ap1800-297235/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/depak Manifying 1 pod document Manifying 2 pod documents PERLANCAR/App-depak-0.51.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'App/depak.pm loaded ok' # at t/00-compile.t line 40. # got: '512' # expected: '0' Can't locate App/tracepm.pm in @INC (you may need to install the App::tracepm module) (@INC contains: /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/arch /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/lib /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/arch /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/cpanfly-5.18/var/megalib /home/fly1800/ap1800-297235/site/lib /home/fly1800/ap1800-297235/lib .) at /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/lib/App/depak.pm line 13. BEGIN failed--compilation aborted at /home/fly1800/cpanfly-5.18/var/cpan/build/App-depak-0.51-LGkdfA/blib/lib/App/depak.pm line 13. Compilation failed in require at -e line 1. # Looks like you failed 1 test of 3. t/00-compile.t ............ 1..3 not ok 1 - App/depak.pm loaded ok ok 2 - Perinci/CmdLine/depak.pm loaded ok ok 3 - bin/depak compiled ok Dubious, test returned 1 (wstat 256, 0x100) Failed 1/3 subtests t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/00-compile.t (Wstat: 256 Tests: 3 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=3, 1 wallclock secs ( 0.03 usr 0.02 sys + 0.18 cusr 0.04 csys = 0.27 CPU) Result: FAIL Failed 1/4 test programs. 1/3 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/App-depak-0.51.tar.gz 2 dependencies missing (App::tracepm,App::lcpan); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/App-depak-0.51.tar.gz VmSize: 299344 kB Finished 2016-02-15T08:21:46