PATH=/usr/bin:/bin:/home/fly1800/var/megalib/bin
Start 2014-11-28T08:03:03
ActivePerl-1800 CPAN-2.00
Reading '/home/fly1800/var/cpan/Metadata'
Database was generated on Fri, 28 Nov 2014 14:17:02 GMT
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz ok
Perinci-Sub-Complete-0.64/
Perinci-Sub-Complete-0.64/META.json
Perinci-Sub-Complete-0.64/LICENSE
Perinci-Sub-Complete-0.64/Changes
Perinci-Sub-Complete-0.64/META.yml
Perinci-Sub-Complete-0.64/Makefile.PL
Perinci-Sub-Complete-0.64/t/
Perinci-Sub-Complete-0.64/t/release-pod-syntax.t
Perinci-Sub-Complete-0.64/t/complete_cli_arg.t
Perinci-Sub-Complete-0.64/t/complete_from_schema.t
Perinci-Sub-Complete-0.64/t/release-pod-coverage.t
Perinci-Sub-Complete-0.64/t/complete_arg_elem.t
Perinci-Sub-Complete-0.64/t/complete_arg_val.t
Perinci-Sub-Complete-0.64/t/release-rinci.t
Perinci-Sub-Complete-0.64/t/00-compile.t
Perinci-Sub-Complete-0.64/README
Perinci-Sub-Complete-0.64/dist.ini
Perinci-Sub-Complete-0.64/lib/
Perinci-Sub-Complete-0.64/lib/Perinci/
Perinci-Sub-Complete-0.64/lib/Perinci/Sub/
Perinci-Sub-Complete-0.64/lib/Perinci/Sub/Complete.pm
Perinci-Sub-Complete-0.64/MANIFEST
Perinci-Sub-Complete-0.64/weaver.ini
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::Util 0.38 not found. We have 0.37.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Complete
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz ----
Complete::Bash [build_requires]
Perinci::Sub::Util [requires]
Running make test
Delayed until after prerequisites
Running test for module 'Complete::Bash'
Running make for P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz ok
Complete-Bash-0.12/
Complete-Bash-0.12/META.json
Complete-Bash-0.12/LICENSE
Complete-Bash-0.12/Changes
Complete-Bash-0.12/META.yml
Complete-Bash-0.12/Makefile.PL
Complete-Bash-0.12/t/
Complete-Bash-0.12/t/release-pod-syntax.t
Complete-Bash-0.12/t/format_completion.t
Complete-Bash-0.12/t/release-pod-coverage.t
Complete-Bash-0.12/t/parse_cmdline.t
Complete-Bash-0.12/t/release-rinci.t
Complete-Bash-0.12/t/00-compile.t
Complete-Bash-0.12/README
Complete-Bash-0.12/dist.ini
Complete-Bash-0.12/lib/
Complete-Bash-0.12/lib/Complete/
Complete-Bash-0.12/lib/Complete/Bash.pm
Complete-Bash-0.12/MANIFEST
Complete-Bash-0.12/weaver.ini
CPAN.pm: Building P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Complete::Bash
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Complete/Bash.pm blib/lib/Complete/Bash.pm
Manifying 1 pod document
PERLANCAR/Complete-Bash-0.12.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..1
ok 1 - Complete/Bash.pm loaded ok
ok
t/format_completion.t .....
# Subtest: accepts array of str
ok 1
1..1
ok 1 - accepts array of str
# Subtest: accepts array of hashref
ok 1
1..1
ok 2 - accepts array of hashref
# Subtest: escmode default
ok 1
1..1
ok 3 - escmode default
# Subtest: escmode none
ok 1
1..1
ok 4 - escmode none
# Subtest: escmode shellvar
ok 1
1..1
ok 5 - escmode shellvar
# Subtest: as array
ok 1
1..1
ok 6 - as array
# Subtest: path_sep /
ok 1
ok 2
1..2
ok 7 - path_sep /
# Subtest: path_sep ::
ok 1
ok 2
ok 3
1..3
ok 8 - path_sep ::
1..8
ok
t/parse_cmdline.t .........
# Subtest: basic
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 1 - basic
# Subtest: whitespace before command
ok 1
1..1
ok 2 - whitespace before command
# Subtest: middle
ok 1
ok 2
ok 3
1..3
ok 3 - middle
# Subtest: escaped space
ok 1
ok 2
ok 3
ok 4
1..4
ok 4 - escaped space
# Subtest: double quotes
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
1..8
ok 5 - double quotes
# Subtest: double quotes (preserve quotes)
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
1..8
ok 6 - double quotes (preserve quotes)
# Subtest: single quotes
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 7 - single quotes
# Subtest: single quotes (preserve quotes)
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 8 - single quotes (preserve quotes)
# Subtest: word breaks
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
1..9
ok 9 - word breaks
1..9
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=6, Tests=18, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.25 cusr 0.04 csys = 0.35 CPU)
Result: PASS
PERLANCAR/Complete-Bash-0.12.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>
Completion module for bash shell
>>> (cd /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm && tar cvf - Complete-Bash-0.12.ppd blib) | gzip -c >/home/fly1800/var/REPO/P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz
Complete-Bash-0.12.ppd
blib/
blib/lib/
blib/lib/Complete/
blib/lib/Complete/Bash.pm
blib/man3/
blib/man3/Complete::Bash.3
>>> mv /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/Complete-Bash-0.12.ppd /home/fly1800/var/REPO/P/PE/PERLANCAR
Running test for module 'Perinci::Sub::Util'
Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
Prepending /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'get'
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz ok
Perinci-Sub-Util-0.40/
Perinci-Sub-Util-0.40/Changes
Perinci-Sub-Util-0.40/LICENSE
Perinci-Sub-Util-0.40/MANIFEST
Perinci-Sub-Util-0.40/lib/
Perinci-Sub-Util-0.40/lib/Perinci/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ResObj.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/Sort.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util.pm
Perinci-Sub-Util-0.40/README
Perinci-Sub-Util-0.40/META.json
Perinci-Sub-Util-0.40/Makefile.PL
Perinci-Sub-Util-0.40/dist.ini
Perinci-Sub-Util-0.40/t/
Perinci-Sub-Util-0.40/t/release-rinci.t
Perinci-Sub-Util-0.40/t/release-pod-coverage.t
Perinci-Sub-Util-0.40/t/caller.t
Perinci-Sub-Util-0.40/t/00-compile.t
Perinci-Sub-Util-0.40/t/gen_modified_sub.t
Perinci-Sub-Util-0.40/t/err.t
Perinci-Sub-Util-0.40/t/release-pod-syntax.t
Perinci-Sub-Util-0.40/weaver.ini
Perinci-Sub-Util-0.40/META.yml
Prepending /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Util
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm
cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm
cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm
Manifying 3 pod documents
PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
make -- OK
Prepending /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..3
ok 1 - Perinci/Sub/Util.pm loaded ok
ok 2 - Perinci/Sub/Util/ResObj.pm loaded ok
ok 3 - Perinci/Sub/Util/Sort.pm loaded ok
ok
t/caller.t ................
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
1..6
ok
t/err.t ...................
# Subtest: defaults
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
ok 6 - result
ok 7 - result metadata is hash
1..7
ok 1 - defaults
# Subtest: set status
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 400
1..4
ok 2 - set status
# Subtest: set message
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
1..5
ok 3 - set message
# Subtest: set prev
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 400
ok 5 - message
ok 6 - prev
1..6
ok 4 - set prev
# Subtest: caller
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
ok 6 - log[0] type
ok 7 - log[0] time
ok 8 - log[0] package
ok 9 - log[0] func
ok 10 - log[0] line
1..10
ok 5 - caller
# Subtest: stack_trace
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - stack_trace
1..5
ok 6 - stack_trace
# Subtest: stack_trace only produced once
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 501
ok 5 - stack_trace
1..5
ok 7 - stack_trace only produced once
1..7
ok
t/gen_modified_sub.t ......
ok 1
ok 2
1..2
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=18, 0 wallclock secs ( 0.04 usr 0.04 sys + 0.38 cusr 0.05 csys = 0.51 CPU)
Result: PASS
PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
make test TEST_VERBOSE=1 -- OK
PPD for Perinci-Sub-Util-0.40 already made
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/lib /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-gedgc7
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/lib /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
>>> make
cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm
Manifying 1 pod document
PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
make -- OK
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-XxYQBI/blib/lib /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/arch /home/fly1800/var/cpan/build/Complete-Bash-0.12-Df9wFm/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..1
ok 1 - Perinci/Sub/Complete.pm loaded ok
ok
t/complete_arg_elem.t .....
ok 1
1..1
ok
t/complete_arg_val.t ......
ok 1
1..1
ok
t/complete_cli_arg.t ......
# Subtest: arg name (no dash)
ok 1 - result
1..1
ok 1 - arg name (no dash)
# Subtest: arg name 2 (dash)
ok 1 - result
1..1
ok 2 - arg name 2 (dash)
# Subtest: arg name 3 (sole completion)
ok 1 - result
1..1
ok 3 - arg name 3 (sole completion)
# Subtest: arg name 3 (unknown option)
ok 1 - result
1..1
ok 4 - arg name 3 (unknown option)
# Subtest: arg value (schema)
ok 1 - result
1..1
ok 5 - arg value (schema)
# Subtest: arg value (spec "completion")
ok 1 - result
1..1
ok 6 - arg value (spec "completion")
# Subtest: arg value, pos
ok 1 - result
1..1
ok 7 - arg value, pos
# Subtest: arg value, pos + greedy
ok 1 - result
1..1
ok 8 - arg value, pos + greedy
# Subtest: custom completion (option value for function arg)
ok 1 - result
1..1
ok 9 - custom completion (option value for function arg)
# Subtest: custom completion (option value for common option)
ok 1 - result
1..1
ok 10 - custom completion (option value for common option)
# Subtest: custom completion (option value, unknown option)
ok 1 - result
1..1
ok 11 - custom completion (option value, unknown option)
# Subtest: custom completion (positional cli arg with no matching function arg)
ok 1 - result
1..1
ok 12 - custom completion (positional cli arg with no matching function arg)
# Subtest: custom completion (positional cli arg for non-greedy arg)
ok 1 - result
1..1
ok 13 - custom completion (positional cli arg for non-greedy arg)
# Subtest: custom completion (positional cli arg for greedy arg)
ok 1 - result
1..1
ok 14 - custom completion (positional cli arg for greedy arg)
1..14
ok
t/complete_from_schema.t ..
# Subtest: int
# Subtest: min/max below limit
ok 1
1..1
ok 1 - min/max below limit
# Subtest: min/xmax below limit
ok 1
1..1
ok 2 - min/xmax below limit
# Subtest: xmin/max below limit
ok 1
1..1
ok 3 - xmin/max below limit
# Subtest: xmin/xmax below limit
ok 1
1..1
ok 4 - xmin/xmax below limit
# Subtest: between below limit
ok 1
1..1
ok 5 - between below limit
# Subtest: xbetween below limit
ok 1
1..1
ok 6 - xbetween below limit
# Subtest: digit by digit completion
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 7 - digit by digit completion
# Subtest: digit by digit completion, with min/max
ok 1
ok 2
ok 3
ok 4
ok 5
1..5
ok 8 - digit by digit completion, with min/max
1..8
ok 1 - int
# Subtest: float
# Subtest: digit by digit completion
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 1 - digit by digit completion
# Subtest: digit by digit completion, with min/max
ok 1
ok 2
ok 3
ok 4
1..4
ok 2 - digit by digit completion, with min/max
1..2
ok 2 - float
1..2
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=8, Tests=19, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.45 cusr 0.07 csys = 0.59 CPU)
Result: PASS
PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>
Complete command-line argument using Rinci metadata
>>> (cd /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-gedgc7 && tar cvf - Perinci-Sub-Complete-0.64.ppd blib) | gzip -c >/home/fly1800/var/REPO/P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz
Perinci-Sub-Complete-0.64.ppd
blib/
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/Sub/
blib/lib/Perinci/Sub/Complete.pm
blib/man3/
blib/man3/Perinci::Sub::Complete.3
>>> mv /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-gedgc7/Perinci-Sub-Complete-0.64.ppd /home/fly1800/var/REPO/P/PE/PERLANCAR
VmSize: 292592 kB
Finished 2014-11-28T08:03:12