PATH=/usr/bin:/bin:/data/fly2000/cpanfly-5.20/var/megalib/bin
Start 2016-05-15T16:47:23
ActivePerl-2000 CPAN-2.10
Reading '/data/fly2000/cpanfly-5.20/var/cpan/Metadata'
Database was generated on Sun, 15 May 2016 04:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz ok
Task-Kensho-WebDev-0.39/
Task-Kensho-WebDev-0.39/Build.PL
Task-Kensho-WebDev-0.39/Changes
Task-Kensho-WebDev-0.39/lib/
Task-Kensho-WebDev-0.39/LICENSE
Task-Kensho-WebDev-0.39/Makefile.PL
Task-Kensho-WebDev-0.39/MANIFEST
Task-Kensho-WebDev-0.39/META.json
Task-Kensho-WebDev-0.39/META.yml
Task-Kensho-WebDev-0.39/README
Task-Kensho-WebDev-0.39/t/
Task-Kensho-WebDev-0.39/xt/
Task-Kensho-WebDev-0.39/xt/author/
Task-Kensho-WebDev-0.39/xt/release/
Task-Kensho-WebDev-0.39/xt/release/changes_has_content.t
Task-Kensho-WebDev-0.39/xt/release/cpan-changes.t
Task-Kensho-WebDev-0.39/xt/release/distmeta.t
Task-Kensho-WebDev-0.39/xt/release/minimum-version.t
Task-Kensho-WebDev-0.39/xt/release/portability.t
Task-Kensho-WebDev-0.39/xt/author/00-compile.t
Task-Kensho-WebDev-0.39/xt/author/clean-namespaces.t
Task-Kensho-WebDev-0.39/xt/author/eol.t
Task-Kensho-WebDev-0.39/xt/author/kwalitee.t
Task-Kensho-WebDev-0.39/xt/author/mojibake.t
Task-Kensho-WebDev-0.39/xt/author/no-tabs.t
Task-Kensho-WebDev-0.39/xt/author/pod-coverage.t
Task-Kensho-WebDev-0.39/xt/author/pod-spell.t
Task-Kensho-WebDev-0.39/xt/author/pod-syntax.t
Task-Kensho-WebDev-0.39/t/00-report-prereqs.dd
Task-Kensho-WebDev-0.39/t/00-report-prereqs.t
Task-Kensho-WebDev-0.39/lib/Task/
Task-Kensho-WebDev-0.39/lib/Task/Kensho/
Task-Kensho-WebDev-0.39/lib/Task/Kensho/WebDev.pm
Configuring E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Warning: prerequisite Task::Catalyst 0 not found.
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Task::Kensho::WebDev
Writing MYMETA.yml and MYMETA.json
ETHER/Task-Kensho-WebDev-0.39.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
---- Unsatisfied dependencies detected during ----
---- ETHER/Task-Kensho-WebDev-0.39.tar.gz ----
Task::Catalyst [requires]
Running test for module 'Task::Catalyst'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz ok
Task-Catalyst-4.02
Task-Catalyst-4.02/README
Task-Catalyst-4.02/Changes
Task-Catalyst-4.02/LICENSE
Task-Catalyst-4.02/dist.ini
Task-Catalyst-4.02/META.yml
Task-Catalyst-4.02/MANIFEST
Task-Catalyst-4.02/Makefile.PL
Task-Catalyst-4.02/t
Task-Catalyst-4.02/t/task-bogus.t
Task-Catalyst-4.02/lib/Task
Task-Catalyst-4.02/lib/Task/Catalyst.pm
Task-Catalyst-4.02/t/release-pod-syntax.t
Task-Catalyst-4.02/t/release-pod-coverage.t
Configuring B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Warning: prerequisite Catalyst::Authentication::Credential::HTTP 0 not found.
Warning: prerequisite Catalyst::Model::Adaptor 0 not found.
Warning: prerequisite Catalyst::Plugin::I18N 0 not found.
Warning: prerequisite Catalyst::Plugin::StackTrace 0 not found.
Warning: prerequisite CatalystX::LeakChecker 0 not found.
Warning: prerequisite CatalystX::Profile 0 not found.
Warning: prerequisite CatalystX::REPL 0 not found.
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Task::Catalyst
Writing MYMETA.yml and MYMETA.json
BOBTFISH/Task-Catalyst-4.02.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
---- Unsatisfied dependencies detected during ----
---- BOBTFISH/Task-Catalyst-4.02.tar.gz ----
CatalystX::REPL [requires]
Catalyst::Plugin::I18N [requires]
CatalystX::LeakChecker [requires]
Catalyst::Model::Adaptor [requires]
CatalystX::Profile [requires]
Catalyst::Authentication::Credential::HTTP [requires]
Catalyst::Plugin::StackTrace [requires]
Running test for module 'CatalystX::REPL'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/F/FL/FLORA/CatalystX-REPL-0.04.tar.gz ok
CatalystX-REPL-0.04
CatalystX-REPL-0.04/Changes
CatalystX-REPL-0.04/dist.ini
CatalystX-REPL-0.04/t
CatalystX-REPL-0.04/t/request.pl
CatalystX-REPL-0.04/t/basic.t
CatalystX-REPL-0.04/t/lib
CatalystX-REPL-0.04/t/lib/TestApp.pm
CatalystX-REPL-0.04/t/lib/TestApp/Controller
CatalystX-REPL-0.04/t/lib/TestApp/Controller/Foo.pm
CatalystX-REPL-0.04/lib/CatalystX
CatalystX-REPL-0.04/lib/CatalystX/REPL.pm
CatalystX-REPL-0.04/META.yml
CatalystX-REPL-0.04/LICENSE
CatalystX-REPL-0.04/README
CatalystX-REPL-0.04/t/release-pod-coverage.t
CatalystX-REPL-0.04/t/release-pod-syntax.t
CatalystX-REPL-0.04/Makefile.PL
CatalystX-REPL-0.04/MANIFEST
Configuring F/FL/FLORA/CatalystX-REPL-0.04.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for CatalystX::REPL
Writing MYMETA.yml and MYMETA.json
FLORA/CatalystX-REPL-0.04.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for F/FL/FLORA/CatalystX-REPL-0.04.tar.gz
>>> make
cp lib/CatalystX/REPL.pm blib/lib/CatalystX/REPL.pm
Manifying 1 pod document
FLORA/CatalystX-REPL-0.04.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t .................
1..5
ok 1 - expect_run
ok 2
ok 3 - in the REPL
ok 4
ok 5 - exception in controller action
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=3, Tests=5, 4 wallclock secs ( 0.05 usr 0.01 sys + 2.68 cusr 0.19 csys = 2.93 CPU)
Result: PASS
FLORA/CatalystX-REPL-0.04.tar.gz
make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/F/FL/FLORA/CHECKSUMS
Florian Ragwitz <rafl@debian.org>
read-eval-print-loop for debugging your Catalyst application
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji && tar cvf - CatalystX-REPL-0.04.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/F/FL/FLORA/CatalystX-REPL-0.04.tar.gz
CatalystX-REPL-0.04.ppd
blib/
blib/man3/
blib/man3/CatalystX::REPL.3
blib/lib/
blib/lib/CatalystX/
blib/lib/CatalystX/REPL.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/CatalystX-REPL-0.04.ppd /data/fly2000/cpanfly-5.20/var/REPO/F/FL/FLORA
Running test for module 'Catalyst::Plugin::I18N'
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/B/BO/BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz ok
Catalyst-Plugin-I18N-0.10/
Catalyst-Plugin-I18N-0.10/Changes
Catalyst-Plugin-I18N-0.10/inc/
Catalyst-Plugin-I18N-0.10/inc/Module/
Catalyst-Plugin-I18N-0.10/inc/Module/AutoInstall.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/
Catalyst-Plugin-I18N-0.10/inc/Module/Install/AutoInstall.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Base.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Can.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Fetch.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Include.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Makefile.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Metadata.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/Win32.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install/WriteAll.pm
Catalyst-Plugin-I18N-0.10/inc/Module/Install.pm
Catalyst-Plugin-I18N-0.10/lib/
Catalyst-Plugin-I18N-0.10/lib/Catalyst/
Catalyst-Plugin-I18N-0.10/lib/Catalyst/Plugin/
Catalyst-Plugin-I18N-0.10/lib/Catalyst/Plugin/I18N/
Catalyst-Plugin-I18N-0.10/lib/Catalyst/Plugin/I18N/Manual.pod
Catalyst-Plugin-I18N-0.10/lib/Catalyst/Plugin/I18N.pm
Catalyst-Plugin-I18N-0.10/Makefile.PL
Catalyst-Plugin-I18N-0.10/MANIFEST
Catalyst-Plugin-I18N-0.10/META.yml
Catalyst-Plugin-I18N-0.10/README
Catalyst-Plugin-I18N-0.10/t/
Catalyst-Plugin-I18N-0.10/t/01use.t
Catalyst-Plugin-I18N-0.10/t/02pod.t
Catalyst-Plugin-I18N-0.10/t/03podcoverage.t
Catalyst-Plugin-I18N-0.10/t/04live.t
Catalyst-Plugin-I18N-0.10/t/lib/
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/Controller/
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/Controller/Root.pm
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/I18N/
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/I18N/de.po
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/I18N/en_us.pm
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/I18N/fr.pm
Catalyst-Plugin-I18N-0.10/t/lib/TestApp/I18N/i_default.po
Catalyst-Plugin-I18N-0.10/t/lib/TestApp.pm
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'prepare'
Configuring B/BO/BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
*** Since we're running under CPAN, I'll just let it take care
of the dependency's installation later.
[Core Features]
- Test::More ...loaded. (1.001009)
- Catalyst::Runtime ...loaded. (5.90104)
- Locale::Maketext::Simple ...loaded. (0.21 >= 0.19)
- I18N::LangTags ...loaded. (0.40 >= 0.35)
- Locale::Maketext::Lexicon ...loaded. (1.00)
- MRO::Compat ...loaded. (0.12 >= 0.10)
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Catalyst::Plugin::I18N
Writing MYMETA.yml and MYMETA.json
BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Catalyst/Plugin/I18N/Manual.pod blib/lib/Catalyst/Plugin/I18N/Manual.pod
cp lib/Catalyst/Plugin/I18N.pm blib/lib/Catalyst/Plugin/I18N.pm
Manifying 2 pod documents
BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz
make -- OK
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/01use.t t/02pod.t t/03podcoverage.t t/04live.t
t/01use.t ..........
1..1
ok 1 - use Catalyst::Plugin::I18N;
ok
t/02pod.t .......... skipped: set TEST_POD to enable this test
t/03podcoverage.t .. skipped: set TEST_POD to enable this test
t/04live.t .........
1..36
ok 1 - Request
ok 2 - Response Successful 2xx
ok 3 - Response Code
ok 4 - Content OK
ok 5 - Request
ok 6 - Response Successful 2xx
ok 7 - Response Code
ok 8 - Content OK
ok 9 - Request
ok 10 - Response Successful 2xx
ok 11 - Response Code
ok 12 - Content OK
ok 13 - Request
ok 14 - Response Successful 2xx
ok 15 - Response Code
ok 16 - Content OK
ok 17 - Request
ok 18 - Response Successful 2xx
ok 19 - Response Code
ok 20 - Content OK
ok 21 - Request
ok 22 - Response Successful 2xx
ok 23 - Response Code
ok 24 - Content OK
ok 25 - Request
ok 26 - Response Successful 2xx
ok 27 - Response Code
ok 28 - Content OK
ok 29 - Request
ok 30 - Response Successful 2xx
ok 31 - Response Code
ok 32 - Content OK
ok 33 - Request
ok 34 - Response Successful 2xx
ok 35 - Response Code
ok 36 - Content OK
ok
All tests successful.
Files=4, Tests=37, 3 wallclock secs ( 0.06 usr 0.01 sys + 2.38 cusr 0.15 csys = 2.60 CPU)
Result: PASS
BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz
make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/B/BO/BOBTFISH/CHECKSUMS
Tomas Doran <bobtfish@bobtfish.net>
I18N for Catalyst
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF && tar cvf - Catalyst-Plugin-I18N-0.10.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH/Catalyst-Plugin-I18N-0.10.tar.gz
Catalyst-Plugin-I18N-0.10.ppd
blib/
blib/man3/
blib/man3/Catalyst::Plugin::I18N.3
blib/man3/Catalyst::Plugin::I18N::Manual.3
blib/lib/
blib/lib/Catalyst/
blib/lib/Catalyst/Plugin/
blib/lib/Catalyst/Plugin/I18N.pm
blib/lib/Catalyst/Plugin/I18N/
blib/lib/Catalyst/Plugin/I18N/Manual.pod
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/Catalyst-Plugin-I18N-0.10.ppd /data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH
Running test for module 'CatalystX::LeakChecker'
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/F/FL/FLORA/CatalystX-LeakChecker-0.06.tar.gz ok
CatalystX-LeakChecker-0.06
CatalystX-LeakChecker-0.06/Changes
CatalystX-LeakChecker-0.06/dist.ini
CatalystX-LeakChecker-0.06/t
CatalystX-LeakChecker-0.06/t/basic.t
CatalystX-LeakChecker-0.06/t/lib
CatalystX-LeakChecker-0.06/t/lib/TestApp.pm
CatalystX-LeakChecker-0.06/t/lib/TestApp/Controller
CatalystX-LeakChecker-0.06/t/lib/TestApp/Controller/Affe.pm
CatalystX-LeakChecker-0.06/lib/CatalystX
CatalystX-LeakChecker-0.06/lib/CatalystX/LeakChecker.pm
CatalystX-LeakChecker-0.06/META.yml
CatalystX-LeakChecker-0.06/LICENSE
CatalystX-LeakChecker-0.06/README
CatalystX-LeakChecker-0.06/t/release-pod-coverage.t
CatalystX-LeakChecker-0.06/t/release-pod-syntax.t
CatalystX-LeakChecker-0.06/Makefile.PL
CatalystX-LeakChecker-0.06/MANIFEST
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'prepare'
Configuring F/FL/FLORA/CatalystX-LeakChecker-0.06.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for CatalystX::LeakChecker
Writing MYMETA.yml and MYMETA.json
FLORA/CatalystX-LeakChecker-0.06.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for F/FL/FLORA/CatalystX-LeakChecker-0.06.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/CatalystX/LeakChecker.pm blib/lib/CatalystX/LeakChecker.pm
Manifying 1 pod document
FLORA/CatalystX-LeakChecker-0.06.tar.gz
make -- OK
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
Unhandled type: GLOB at /data/fly2000/cpanfly-5.20/var/megalib/Devel/Cycle.pm line 107.
Unhandled type: REGEXP at /data/fly2000/cpanfly-5.20/var/megalib/Devel/Cycle.pm line 107.
t/basic.t .................
ok 1
ok 2 - no leaks reported without stashed closures
ok 3
ok 4 - one leak reported with a stashed closure, closing over $ctx
ok 5
ok 6 - no leak reported with a stashed closure, closing over a weak $ctx
ok 7
ok 8 - one leak reported with stashed closure, closing over something with a reference to $ctx
ok 9
ok 10 - no leak when closing over something holding a weak reference to $ctx
ok 11
ok 12 - one leak found when stashing $ctx
ok 13
ok 14 - no leak when stashing a weak $ctx
1..14
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=3, Tests=14, 2 wallclock secs ( 0.05 usr 0.02 sys + 2.44 cusr 0.19 csys = 2.70 CPU)
Result: PASS
FLORA/CatalystX-LeakChecker-0.06.tar.gz
make test TEST_VERBOSE=1 -- OK
Florian Ragwitz <rafl@debian.org>
Debug memory leaks in Catalyst applications
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN && tar cvf - CatalystX-LeakChecker-0.06.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/F/FL/FLORA/CatalystX-LeakChecker-0.06.tar.gz
CatalystX-LeakChecker-0.06.ppd
blib/
blib/man3/
blib/man3/CatalystX::LeakChecker.3
blib/lib/
blib/lib/CatalystX/
blib/lib/CatalystX/LeakChecker.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/CatalystX-LeakChecker-0.06.ppd /data/fly2000/cpanfly-5.20/var/REPO/F/FL/FLORA
Running test for module 'Catalyst::Model::Adaptor'
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/B/BO/BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz ok
Catalyst-Model-Adaptor-0.10/
Catalyst-Model-Adaptor-0.10/Changes
Catalyst-Model-Adaptor-0.10/inc/
Catalyst-Model-Adaptor-0.10/inc/Module/
Catalyst-Model-Adaptor-0.10/inc/Module/Install/
Catalyst-Model-Adaptor-0.10/inc/Module/Install/AuthorTests.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Base.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Can.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Fetch.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Makefile.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Metadata.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/ReadmeFromPod.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/Win32.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install/WriteAll.pm
Catalyst-Model-Adaptor-0.10/inc/Module/Install.pm
Catalyst-Model-Adaptor-0.10/lib/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/Model/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/Model/Adaptor.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/Model/Factory/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/Model/Factory/PerRequest.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Helper/Model/Factory.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Adaptor/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Adaptor/Base.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Adaptor.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Factory/
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Factory/PerRequest.pm
Catalyst-Model-Adaptor-0.10/lib/Catalyst/Model/Factory.pm
Catalyst-Model-Adaptor-0.10/Makefile.PL
Catalyst-Model-Adaptor-0.10/MANIFEST
Catalyst-Model-Adaptor-0.10/MANIFEST.SKIP
Catalyst-Model-Adaptor-0.10/META.yml
Catalyst-Model-Adaptor-0.10/README
Catalyst-Model-Adaptor-0.10/t/
Catalyst-Model-Adaptor-0.10/t/00-load.t
Catalyst-Model-Adaptor-0.10/t/author/
Catalyst-Model-Adaptor-0.10/t/author/pod-coverage.t
Catalyst-Model-Adaptor-0.10/t/author/pod.t
Catalyst-Model-Adaptor-0.10/t/lib/
Catalyst-Model-Adaptor-0.10/t/lib/Makefile.PL
Catalyst-Model-Adaptor-0.10/t/lib/script/
Catalyst-Model-Adaptor-0.10/t/lib/script/testapp_server.pl
Catalyst-Model-Adaptor-0.10/t/lib/script/testapp_test.pl
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Backend/
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Backend/InnerPackage.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Backend/SomeClass.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/BaseController/
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/BaseController/Adaptor.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/Adaptor.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/Factory.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/InnerPackage.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/PerRequest.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Controller/Root.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/Factory.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/InnerPackage.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/NoArgs.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/PerRequest.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp/Model/SomeClass.pm
Catalyst-Model-Adaptor-0.10/t/lib/TestApp.pm
Catalyst-Model-Adaptor-0.10/t/live-test.t
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'prepare'
Configuring B/BO/BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Cannot determine perl version info from lib/Catalyst/Model/Adaptor.pm
Warning: prerequisite ok 0 not found.
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Catalyst::Model::Adaptor
Writing MYMETA.yml and MYMETA.json
BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
---- Unsatisfied dependencies detected during ----
---- BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz ----
ok [build_requires]
Running test for module 'ok'
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/E/EX/EXODIST/Test-Simple-1.302015.tar.gz ok
Test-Simple-1.302015
Test-Simple-1.302015/README
Test-Simple-1.302015/LICENSE
Test-Simple-1.302015/Changes
Test-Simple-1.302015/MANIFEST
Test-Simple-1.302015/dist.ini
Test-Simple-1.302015/cpanfile
Test-Simple-1.302015/META.yml
Test-Simple-1.302015/README.md
Test-Simple-1.302015/lib
Test-Simple-1.302015/lib/ok.pm
Test-Simple-1.302015/t
Test-Simple-1.302015/t/tools.t
Test-Simple-1.302015/META.json
Test-Simple-1.302015/perltidyrc
Test-Simple-1.302015/t/tools.pl
Test-Simple-1.302015/Makefile.PL
Test-Simple-1.302015/lib/Test2.pm
Test-Simple-1.302015/t/00-report.t
Test-Simple-1.302015/t/00compile.t
Test-Simple-1.302015/t/lib
Test-Simple-1.302015/t/lib/Dummy.pm
Test-Simple-1.302015/t/lib/MyTest.pm
Test-Simple-1.302015/t/lib/TieOut.pm
Test-Simple-1.302015/t/lib/SigDie.pm
Test-Simple-1.302015/t/Legacy
Test-Simple-1.302015/t/Legacy/diag.t
Test-Simple-1.302015/t/Legacy/fail.t
Test-Simple-1.302015/t/Legacy/More.t
Test-Simple-1.302015/t/Legacy/plan.t
Test-Simple-1.302015/t/Legacy/auto.t
Test-Simple-1.302015/t/Legacy/utf8.t
Test-Simple-1.302015/t/Legacy/note.t
Test-Simple-1.302015/t/Legacy/todo.t
Test-Simple-1.302015/t/Legacy/exit.t
Test-Simple-1.302015/t/Legacy/skip.t
Test-Simple-1.302015/t/Legacy/fork.t
Test-Simple-1.302015/t/Legacy/died.t
Test-Simple-1.302015/lib/Test
Test-Simple-1.302015/lib/Test/More.pm
Test-Simple-1.302015/lib/Test2
Test-Simple-1.302015/lib/Test2/IPC.pm
Test-Simple-1.302015/lib/Test2/Hub.pm
Test-Simple-1.302015/lib/Test2/API.pm
Test-Simple-1.302015/Examples
Test-Simple-1.302015/Examples/tools.t
Test-Simple-1.302015/t/Legacy/depth.t
Test-Simple-1.302015/t/Legacy/extra.t
Test-Simple-1.302015/t/Legacy/undef.t
Test-Simple-1.302015/lib/Test2/Util.pm
Test-Simple-1.302015/Examples/tools.pl
Test-Simple-1.302015/t/lib/Dev
Test-Simple-1.302015/t/lib/Dev/Null.pm
Test-Simple-1.302015/t/Legacy/use_ok.t
Test-Simple-1.302015/t/Legacy/buffer.t
Test-Simple-1.302015/t/Legacy/simple.t
Test-Simple-1.302015/t/Legacy/c_flag.t
Test-Simple-1.302015/t/Legacy/strays.t
Test-Simple-1.302015/t/Legacy/cmp_ok.t
Test-Simple-1.302015/t/Legacy/import.t
Test-Simple-1.302015/t/Legacy/new_ok.t
Test-Simple-1.302015/t/Legacy/eq_set.t
Test-Simple-1.302015/t/Legacy/useing.t
Test-Simple-1.302015/lib/Test/Simple.pm
Test-Simple-1.302015/lib/Test/Tester.pm
Test-Simple-1.302015/lib/Test/use
Test-Simple-1.302015/lib/Test/use/ok.pm
Test-Simple-1.302015/lib/Test2/Event.pm
Test-Simple-1.302015/examples
Test-Simple-1.302015/examples/subtest.t
Test-Simple-1.302015/examples/indent.pl
Test-Simple-1.302015/t/lib/SmallTest.pm
Test-Simple-1.302015/t/Legacy/skipall.t
Test-Simple-1.302015/t/Legacy/threads.t
Test-Simple-1.302015/t/Legacy/capture.t
Test-Simple-1.302015/t/Legacy/no_plan.t
Test-Simple-1.302015/t/Legacy/explain.t
Test-Simple-1.302015/t/Legacy/missing.t
Test-Simple-1.302015/lib/Test/Builder.pm
Test-Simple-1.302015/t/lib/NoExporter.pm
Test-Simple-1.302015/t/lib/MyOverload.pm
Test-Simple-1.302015/t/Legacy/bad_plan.t
Test-Simple-1.302015/t/Legacy/versions.t
Test-Simple-1.302015/t/Legacy/01-basic.t
Test-Simple-1.302015/t/Legacy/no_tests.t
Test-Simple-1.302015/t/Legacy/overload.t
Test-Simple-1.302015/t/Legacy/bail_out.t
Test-Simple-1.302015/t/Legacy/plan_bad.t
Test-Simple-1.302015/t/Legacy/run_test.t
Test-Simple-1.302015/t/Legacy/fail_one.t
Test-Simple-1.302015/t/Legacy/Bugs
Test-Simple-1.302015/t/Legacy/Bugs/629.t
Test-Simple-1.302015/t/Legacy/Bugs/600.t
Test-Simple-1.302015/t/zzz-check-breaks.t
Test-Simple-1.302015/t/Test2/legacy
Test-Simple-1.302015/t/Test2/legacy/TAP.t
Test-Simple-1.302015/t/Legacy/fail-like.t
Test-Simple-1.302015/t/Legacy/fail-more.t
Test-Simple-1.302015/t/Legacy/extra_one.t
Test-Simple-1.302015/lib/Test/Tutorial.pod
Test-Simple-1.302015/lib/Test2/Event
Test-Simple-1.302015/lib/Test2/Event/Ok.pm
Test-Simple-1.302015/t/Test2/modules
Test-Simple-1.302015/t/Test2/modules/API.t
Test-Simple-1.302015/t/Test2/modules/Hub.t
Test-Simple-1.302015/t/Test2/modules/IPC.t
Test-Simple-1.302015/t/Legacy/require_ok.t
Test-Simple-1.302015/t/Legacy/subtest
Test-Simple-1.302015/t/Legacy/subtest/do.t
Test-Simple-1.302015/lib/Test2/Formatter.pm
Test-Simple-1.302015/lib/Test2/API
Test-Simple-1.302015/lib/Test2/API/Stack.pm
Test-Simple-1.302015/t/Test2/modules/Util.t
Test-Simple-1.302015/t/Legacy/filehandles.t
Test-Simple-1.302015/t/Legacy/check_tests.t
Test-Simple-1.302015/t/Legacy/Builder
Test-Simple-1.302015/t/Legacy/Builder/try.t
Test-Simple-1.302015/t/Legacy/Simple
Test-Simple-1.302015/t/Legacy/Simple/load.t
Test-Simple-1.302015/t/Legacy/subtest/die.t
Test-Simple-1.302015/lib/Test2/Event/Note.pm
Test-Simple-1.302015/lib/Test2/Event/Diag.pm
Test-Simple-1.302015/lib/Test2/Event/Bail.pm
Test-Simple-1.302015/lib/Test2/Event/Skip.pm
Test-Simple-1.302015/lib/Test2/Event/Plan.pm
Test-Simple-1.302015/lib/Test2/IPC
Test-Simple-1.302015/lib/Test2/IPC/Driver.pm
Test-Simple-1.302015/lib/Test2/Util
Test-Simple-1.302015/lib/Test2/Util/Trace.pm
Test-Simple-1.302015/t/Test2/modules/Event.t
Test-Simple-1.302015/t/Legacy/plan_no_plan.t
Test-Simple-1.302015/t/Legacy/BEGIN_use_ok.t
Test-Simple-1.302015/t/Legacy/thread_taint.t
Test-Simple-1.302015/t/Legacy/Builder/carp.t
Test-Simple-1.302015/t/Legacy/subtest/args.t
Test-Simple-1.302015/t/Legacy/subtest/todo.t
Test-Simple-1.302015/t/Legacy/subtest/fork.t
Test-Simple-1.302015/lib/Test2/Transition.pod
Test-Simple-1.302015/lib/Test2/Hub
Test-Simple-1.302015/lib/Test2/Hub/Subtest.pm
Test-Simple-1.302015/lib/Test2/API/Context.pm
Test-Simple-1.302015/t/Test2/behavior
Test-Simple-1.302015/t/Test2/behavior/Taint.t
Test-Simple-1.302015/t/Legacy/plan_skip_all.t
Test-Simple-1.302015/t/Legacy/circular_data.t
Test-Simple-1.302015/t/Legacy/Builder/is_fh.t
Test-Simple-1.302015/t/Legacy/Builder/reset.t
Test-Simple-1.302015/t/Legacy/Test2
Test-Simple-1.302015/t/Legacy/Test2/Subtest.t
Test-Simple-1.302015/t/Legacy/subtest/basic.t
Test-Simple-1.302015/t/Legacy/subtest/wstat.t
Test-Simple-1.302015/lib/Test2/API/Breakage.pm
Test-Simple-1.302015/lib/Test2/API/Instance.pm
Test-Simple-1.302015/t/Legacy/plan_is_noplan.t
Test-Simple-1.302015/t/Legacy/harness_active.t
Test-Simple-1.302015/t/Legacy/is_deeply_fail.t
Test-Simple-1.302015/t/Legacy/Builder/ok_obj.t
Test-Simple-1.302015/t/Legacy/Builder/create.t
Test-Simple-1.302015/t/Legacy/Builder/output.t
Test-Simple-1.302015/t/Legacy/subtest/events.t
Test-Simple-1.302015/t/Legacy/Regression
Test-Simple-1.302015/t/Legacy/Regression/637.t
Test-Simple-1.302015/lib/Test/Builder
Test-Simple-1.302015/lib/Test/Builder/Module.pm
Test-Simple-1.302015/lib/Test/Builder/Tester.pm
Test-Simple-1.302015/lib/Test/Tester
Test-Simple-1.302015/lib/Test/Tester/Capture.pm
Test-Simple-1.302015/lib/Test2/Event/Subtest.pm
Test-Simple-1.302015/lib/Test2/Event/Waiting.pm
Test-Simple-1.302015/lib/Test2/Formatter
Test-Simple-1.302015/lib/Test2/Formatter/TAP.pm
Test-Simple-1.302015/lib/Test2/Util/HashBase.pm
Test-Simple-1.302015/t/lib/Test/Simple
Test-Simple-1.302015/t/lib/Test/Simple/Catch.pm
Test-Simple-1.302015/t/Test2/behavior/err_var.t
Test-Simple-1.302015/t/Test2/modules/Event
Test-Simple-1.302015/t/Test2/modules/Event/Ok.t
Test-Simple-1.302015/t/Test2/regression
Test-Simple-1.302015/t/Test2/regression/gh_16.t
Test-Simple-1.302015/t/Legacy/478-cmp_ok_hash.t
Test-Simple-1.302015/t/Legacy/Builder/no_diag.t
Test-Simple-1.302015/t/Legacy/Builder/details.t
Test-Simple-1.302015/t/Legacy/Builder/Builder.t
Test-Simple-1.302015/t/Legacy/Tester
Test-Simple-1.302015/t/Legacy/Tester/tbt_09do.t
Test-Simple-1.302015/t/Legacy/subtest/threads.t
Test-Simple-1.302015/lib/Test/Tester/Delegate.pm
Test-Simple-1.302015/t/Test2/modules/API
Test-Simple-1.302015/t/Test2/modules/API/Stack.t
Test-Simple-1.302015/t/Legacy/explain_err_vars.t
Test-Simple-1.302015/t/Legacy/BEGIN_require_ok.t
Test-Simple-1.302015/t/Legacy/overload_threads.t
Test-Simple-1.302015/t/Legacy/Builder/has_plan.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_03die.t
Test-Simple-1.302015/t/Legacy/subtest/bail_out.t
Test-Simple-1.302015/lib/Test/Builder/TodoDiag.pm
Test-Simple-1.302015/lib/Test2/Hub/Interceptor.pm
Test-Simple-1.302015/lib/Test2/Event/Exception.pm
Test-Simple-1.302015/t/Test2/modules/Event/Bail.t
Test-Simple-1.302015/t/Test2/modules/Event/Plan.t
Test-Simple-1.302015/t/Test2/modules/Event/Skip.t
Test-Simple-1.302015/t/Test2/modules/Event/Note.t
Test-Simple-1.302015/t/Test2/modules/Event/Diag.t
Test-Simple-1.302015/t/Test2/modules/IPC
Test-Simple-1.302015/t/Test2/modules/IPC/Driver.t
Test-Simple-1.302015/t/Test2/modules/Util
Test-Simple-1.302015/t/Test2/modules/Util/Trace.t
Test-Simple-1.302015/t/Legacy/is_deeply_dne_bug.t
Test-Simple-1.302015/t/Legacy/Builder/no_header.t
Test-Simple-1.302015/t/Legacy/Builder/no_ending.t
Test-Simple-1.302015/t/Legacy/Builder/has_plan2.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_07args.t
Test-Simple-1.302015/t/Legacy/subtest/predicate.t
Test-Simple-1.302015/t/Legacy/subtest/singleton.t
Test-Simple-1.302015/lib/Test/Builder/Formatter.pm
Test-Simple-1.302015/lib/Test/Builder/IO
Test-Simple-1.302015/lib/Test/Builder/IO/Scalar.pm
Test-Simple-1.302015/lib/Test2/IPC/Driver
Test-Simple-1.302015/lib/Test2/IPC/Driver/Files.pm
Test-Simple-1.302015/t/Test2/behavior/init_croak.t
Test-Simple-1.302015/t/Test2/modules/Hub
Test-Simple-1.302015/t/Test2/modules/Hub/Subtest.t
Test-Simple-1.302015/t/Test2/modules/API/Context.t
Test-Simple-1.302015/t/Legacy/Builder/is_passing.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_01basic.t
Test-Simple-1.302015/lib/Test2/Util/ExternalMeta.pm
Test-Simple-1.302015/t/lib/Test/Builder
Test-Simple-1.302015/t/lib/Test/Builder/NoOutput.pm
Test-Simple-1.302015/t/Test2/behavior/no_load_api.t
Test-Simple-1.302015/t/Test2/modules/API/Breakage.t
Test-Simple-1.302015/t/Test2/modules/API/Instance.t
Test-Simple-1.302015/t/Legacy/Builder/maybe_regex.t
Test-Simple-1.302015/t/Legacy/subtest/for_do_t.test
Test-Simple-1.302015/t/Test2/modules/Event/Waiting.t
Test-Simple-1.302015/t/Test2/modules/Event/Subtest.t
Test-Simple-1.302015/t/Test2/modules/Formatter
Test-Simple-1.302015/t/Test2/modules/Formatter/TAP.t
Test-Simple-1.302015/t/Test2/modules/Util/HashBase.t
Test-Simple-1.302015/t/Legacy/00test_harness_check.t
Test-Simple-1.302015/t/Legacy/plan_shouldnt_import.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing.t
Test-Simple-1.302015/t/Legacy/Builder/current_test.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_08subtest.t
Test-Simple-1.302015/t/Legacy/subtest/line_numbers.t
Test-Simple-1.302015/lib/Test/Builder/Tester
Test-Simple-1.302015/lib/Test/Builder/Tester/Color.pm
Test-Simple-1.302015/lib/Test/Tester/CaptureRunner.pm
Test-Simple-1.302015/t/Test2/acceptance
Test-Simple-1.302015/t/Test2/acceptance/try_it_todo.t
Test-Simple-1.302015/t/Test2/acceptance/try_it_fork.t
Test-Simple-1.302015/t/Test2/acceptance/try_it_plan.t
Test-Simple-1.302015/t/Test2/acceptance/try_it_skip.t
Test-Simple-1.302015/t/Legacy/Builder/reset_outputs.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_05faildiag.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_04line_num.t
Test-Simple-1.302015/t/Legacy/subtest/implicit_done.t
Test-Simple-1.302015/t/Test2/behavior/Subtest_events.t
Test-Simple-1.302015/t/Test2/modules/Hub/Interceptor.t
Test-Simple-1.302015/t/Test2/modules/Event/Exception.t
Test-Simple-1.302015/t/Legacy/is_deeply_with_threads.t
Test-Simple-1.302015/t/Legacy/Builder/no_plan_at_all.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_02fhrestore.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_06errormess.t
Test-Simple-1.302015/t/regression
Test-Simple-1.302015/t/regression/no_name_in_subtest.t
Test-Simple-1.302015/t/regression/642_persistent_end.t
Test-Simple-1.302015/t/Test2/modules/IPC/Driver
Test-Simple-1.302015/t/Test2/modules/IPC/Driver/Files.t
Test-Simple-1.302015/t/Legacy/Tester/tbt_09do_script.pl
Test-Simple-1.302015/t/Test2/acceptance/try_it_threads.t
Test-Simple-1.302015/t/Test2/acceptance/try_it_no_plan.t
Test-Simple-1.302015/t/Test2/modules/Util/ExternalMeta.t
Test-Simple-1.302015/t/Legacy/dont_overwrite_die_handler.t
Test-Simple-1.302015/t/Legacy/tbm_doesnt_set_exported_to.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing_double.t
Test-Simple-1.302015/lib/Test2/Hub/Interceptor
Test-Simple-1.302015/lib/Test2/Hub/Interceptor/Terminator.pm
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/exit.plx
Test-Simple-1.302015/t/Legacy/Builder/fork_with_new_stdout.t
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/death.plx
Test-Simple-1.302015/t/Legacy_And_Test2
Test-Simple-1.302015/t/Legacy_And_Test2/builder_loaded_late.t
Test-Simple-1.302015/t/Test2/acceptance/try_it_done_testing.t
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/extras.plx
Test-Simple-1.302015/t/Test2/regression/ipc_files_abort_exit.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing_with_plan.t
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/require.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/too_few.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/success.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/one_fail.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/two_fail.plx
Test-Simple-1.302015/t/Test2/behavior/Subtest_buffer_formatter.t
Test-Simple-1.302015/t/Test2/behavior/nested_context_exception.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing_with_number.t
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/five_fail.plx
Test-Simple-1.302015/t/Test2/modules/Hub/Interceptor
Test-Simple-1.302015/t/Test2/modules/Hub/Interceptor/Terminator.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing_with_no_plan.t
Test-Simple-1.302015/t/Legacy/Builder/current_test_without_plan.t
Test-Simple-1.302015/t/Legacy/Builder/done_testing_plan_mismatch.t
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/too_few_fail.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/death_in_eval.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/pre_plan_death.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/last_minute_death.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/death_with_handler.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/missing_done_testing.plx
Test-Simple-1.302015/t/lib/Test/Simple/sample_tests/one_fail_without_plan.plx
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'prepare'
Configuring E/EX/EXODIST/Test-Simple-1.302015.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Test::Simple
Writing MYMETA.yml and MYMETA.json
EXODIST/Test-Simple-1.302015.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for E/EX/EXODIST/Test-Simple-1.302015.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Test/Builder.pm blib/lib/Test/Builder.pm
cp lib/ok.pm blib/lib/ok.pm
cp lib/Test/Tester/Capture.pm blib/lib/Test/Tester/Capture.pm
cp lib/Test2/Hub/Subtest.pm blib/lib/Test2/Hub/Subtest.pm
cp lib/Test2/Hub/Interceptor/Terminator.pm blib/lib/Test2/Hub/Interceptor/Terminator.pm
cp lib/Test/use/ok.pm blib/lib/Test/use/ok.pm
cp lib/Test2/Util.pm blib/lib/Test2/Util.pm
cp lib/Test2/IPC.pm blib/lib/Test2/IPC.pm
cp lib/Test2/Util/HashBase.pm blib/lib/Test2/Util/HashBase.pm
cp lib/Test/Builder/Formatter.pm blib/lib/Test/Builder/Formatter.pm
cp lib/Test2/Formatter/TAP.pm blib/lib/Test2/Formatter/TAP.pm
cp lib/Test2/API/Context.pm blib/lib/Test2/API/Context.pm
cp lib/Test2/Event.pm blib/lib/Test2/Event.pm
cp lib/Test/Simple.pm blib/lib/Test/Simple.pm
cp lib/Test/Builder/Tester/Color.pm blib/lib/Test/Builder/Tester/Color.pm
cp lib/Test/Builder/TodoDiag.pm blib/lib/Test/Builder/TodoDiag.pm
cp lib/Test2/Util/ExternalMeta.pm blib/lib/Test2/Util/ExternalMeta.pm
cp lib/Test2/API/Breakage.pm blib/lib/Test2/API/Breakage.pm
cp lib/Test2/Event/Plan.pm blib/lib/Test2/Event/Plan.pm
cp lib/Test/Builder/IO/Scalar.pm blib/lib/Test/Builder/IO/Scalar.pm
cp lib/Test2/IPC/Driver.pm blib/lib/Test2/IPC/Driver.pm
cp lib/Test2/Hub/Interceptor.pm blib/lib/Test2/Hub/Interceptor.pm
cp lib/Test2/Event/Diag.pm blib/lib/Test2/Event/Diag.pm
cp lib/Test2/API.pm blib/lib/Test2/API.pm
cp lib/Test2/Event/Exception.pm blib/lib/Test2/Event/Exception.pm
cp lib/Test2/IPC/Driver/Files.pm blib/lib/Test2/IPC/Driver/Files.pm
cp lib/Test2/Event/Skip.pm blib/lib/Test2/Event/Skip.pm
cp lib/Test/Builder/Tester.pm blib/lib/Test/Builder/Tester.pm
cp lib/Test/Tester/CaptureRunner.pm blib/lib/Test/Tester/CaptureRunner.pm
cp lib/Test/Tester/Delegate.pm blib/lib/Test/Tester/Delegate.pm
cp lib/Test/Tutorial.pod blib/lib/Test/Tutorial.pod
cp lib/Test/More.pm blib/lib/Test/More.pm
cp lib/Test2/API/Instance.pm blib/lib/Test2/API/Instance.pm
cp lib/Test2/Transition.pod blib/lib/Test2/Transition.pod
cp lib/Test2/Util/Trace.pm blib/lib/Test2/Util/Trace.pm
cp lib/Test2/Event/Subtest.pm blib/lib/Test2/Event/Subtest.pm
cp lib/Test2/API/Stack.pm blib/lib/Test2/API/Stack.pm
cp lib/Test/Tester.pm blib/lib/Test/Tester.pm
cp lib/Test2/Event/Ok.pm blib/lib/Test2/Event/Ok.pm
cp lib/Test2/Hub.pm blib/lib/Test2/Hub.pm
cp lib/Test2/Formatter.pm blib/lib/Test2/Formatter.pm
cp lib/Test2.pm blib/lib/Test2.pm
cp lib/Test2/Event/Note.pm blib/lib/Test2/Event/Note.pm
cp lib/Test2/Event/Waiting.pm blib/lib/Test2/Event/Waiting.pm
cp lib/Test/Builder/Module.pm blib/lib/Test/Builder/Module.pm
cp lib/Test2/Event/Bail.pm blib/lib/Test2/Event/Bail.pm
Manifying 37 pod documents
Manifying 8 pod documents
EXODIST/Test-Simple-1.302015.tar.gz
make -- OK
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/Legacy/*.t t/Legacy/Bugs/*.t t/Legacy/Builder/*.t t/Legacy/Regression/*.t t/Legacy/Simple/*.t t/Legacy/Test2/*.t t/Legacy/Tester/*.t t/Legacy/subtest/*.t t/Legacy_And_Test2/*.t t/Test2/acceptance/*.t t/Test2/behavior/*.t t/Test2/legacy/*.t t/Test2/modules/*.t t/Test2/modules/API/*.t t/Test2/modules/Event/*.t t/Test2/modules/Formatter/*.t t/Test2/modules/Hub/*.t t/Test2/modules/Hub/Interceptor/*.t t/Test2/modules/IPC/*.t t/Test2/modules/IPC/Driver/*.t t/Test2/modules/Util/*.t t/Test2/regression/*.t t/regression/*.t
# DIAGNOSTICS INFO IN CASE OF FAILURE:
# Perl: 5.020001
# CAPABILITIES:
# CAN_FORK Yes
# CAN_REALLY_FORK Yes
# CAN_THREAD Yes
# DEPENDENCIES:
# Carp 1.38
# File::Spec 3.62
# File::Temp 0.2304
# PerlIO 1.09
# Scalar::Util 1.45
# Storable 2.51
# Test2 1.302015
# overload 1.22
# threads 2.07
# utf8 1.13_01
t/00-report.t ..................................
ok 1
1..1
ok
You should load Test::Tester before Test::Builder (or anything that loads Test::Builder) at Test/Tester.pm line 9.
t/00compile.t ..................................
1..28
ok 1
ok 2 - POD test for Test/Builder.pm
ok 3
ok 4 - POD test for Test/Builder/Formatter.pm
ok 5
ok 6 - POD test for Test/Builder/IO/Scalar.pm
ok 7
ok 8 - POD test for Test/Builder/Module.pm
ok 9
ok 10 - POD test for Test/Builder/Tester.pm
ok 11
ok 12 - POD test for Test/Builder/Tester/Color.pm
ok 13
ok 14 - POD test for Test/Builder/TodoDiag.pm
ok 15
ok 16 - POD test for Test/More.pm
ok 17
ok 18 - POD test for Test/Simple.pm
ok 19
ok 20 - POD test for Test/Tester.pm
ok 21
ok 22 - POD test for Test/Tester/Capture.pm
ok 23
ok 24 - POD test for Test/Tester/CaptureRunner.pm
ok 25
ok 26 - POD test for Test/Tester/Delegate.pm (no pod)
ok 27
ok 28 - POD test for Test/use/ok.pm
ok
t/Legacy/00test_harness_check.t ................
1..1
ok 1 - T::H version
ok
t/Legacy/01-basic.t ............................
1..3
ok 1 - use strict;
ok 2 - use Test::More;
ok 3 - ok
ok
t/Legacy/478-cmp_ok_hash.t .....................
ok 1 - Passes on correct comparison
ok 2 - Did not pass
ok 3 - 1 result
ok 4 - result is false
ok 5 - Syntax error
ok 6 - We got warnings
1..6
ok
t/Legacy/auto.t ................................
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/Legacy/bad_plan.t ............................
1..2
ok 1 - bad plan()
ok 2 - bad plan()
ok
t/Legacy/bail_out.t ............................
1..3
ok 1
ok 2
ok 3 - Backwards compat
ok
t/Legacy/BEGIN_require_ok.t ....................
ok 1 - require strict;
ok 2 - require_ok ran
1..2
ok
t/Legacy/BEGIN_use_ok.t ........................
ok 1 - use strict;
ok 2 - use_ok() ran
1..2
ok
t/Legacy/buffer.t ..............................
1..20
ok 1 - I'm ok
ok 2 - You're ok
ok 3 - I'm ok
ok 4 - You're ok
ok 5 - I'm ok
ok 6 - You're ok
ok 7 - I'm ok
ok 8 - You're ok
ok 9 - I'm ok
ok 10 - You're ok
ok 11 - I'm ok
ok 12 - You're ok
ok 13 - I'm ok
ok 14 - You're ok
ok 15 - I'm ok
ok 16 - You're ok
ok 17 - I'm ok
ok 18 - You're ok
ok 19 - I'm ok
ok 20 - You're ok
ok
t/Legacy/Bugs/600.t ............................
ok 1 - only 1 event
ok 2 - Plan set to 1, not 0
1..2
ok
t/Legacy/Bugs/629.t ............................
ok 1 - did not warn when waiting for done_testing
ok 2 - did not warn with 'no_plan'
ok 3 - warned with static plan
ok 4 - Got expected warning
1..4
ok
t/Legacy/Builder/Builder.t .....................
1..7
ok 1 - compiled and new()
ok 2 - level()
ok 3 - is_eq
ok 4 - is_num
ok 5 - current_test() get
ok 6 - current_test() set
ok 7 - counter still good
ok
t/Legacy/Builder/carp.t ........................
1..3
ok 1
ok 2
ok 3
ok
t/Legacy/Builder/create.t ......................
1..7
ok 1 - An object of class 'Test::Builder' isa 'Test::Builder'
ok 2 - create does not interfere with ->builder
ok 3 - does not interfere with ->new
ok 4 - An object of class 'Test::Builder::NoOutput' isa 'Test::Builder'
ok 5 - Test::Builder->create makes a new object
ok 6
ok 7 - Changing output() of new TB doesn't interfere with singleton
ok
t/Legacy/Builder/current_test.t ................
1..2
ok 1
ok 2
ok
t/Legacy/Builder/current_test_without_plan.t ...
ok 1
ok 2
ok 3 - Third test
1..3
ok
t/Legacy/Builder/details.t .....................
1..9
ok 1 - no tests yet, no summary
ok 2
ok 3
ok 4
ok 5 - summary
ok 6 - current_test incremented
ok 7 - details() should return a list of all test details
ok 8
ok 9
ok
t/Legacy/Builder/done_testing.t ................
ok 1 - testing done_testing() with no arguments
ok 2 - another test so we're not testing just one
1..2
ok
t/Legacy/Builder/done_testing_double.t .........
1..1
ok 1 - multiple done_testing
ok
t/Legacy/Builder/done_testing_plan_mismatch.t ..
1..1
ok 1
ok
t/Legacy/Builder/done_testing_with_no_plan.t ...
ok 1
ok 2
1..2
ok
t/Legacy/Builder/done_testing_with_number.t ....
ok 1 - testing done_testing() with no arguments
ok 2 - another test so we're not testing just one
1..2
ok
t/Legacy/Builder/done_testing_with_plan.t ......
1..2
ok 1
ok 2
ok
t/Legacy/Builder/fork_with_new_stdout.t ........
1..2
ok 1 - ok 1 from child
ok 2 - 1..1 from child
ok
t/Legacy/Builder/has_plan.t ....................
1..2
ok 1 - no plan yet defined
ok 2 - has fixed plan
ok
t/Legacy/Builder/has_plan2.t ...................
ok 1 - has no_plan
1..1
ok
t/Legacy/Builder/is_fh.t .......................
1..11
ok 1 - string is not a filehandle
ok 2 - empty string
ok 3 - undef
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok
t/Legacy/Builder/is_passing.t ..................
ok 1 - a fresh TB object is passing
ok 2 - still passing after a test
ok 3 - not passing after a failing test
ok 4 - a passing test doesn't resurrect it
ok 5 - a successful plan doesn't help either
ok 6 - Passing with a plan
ok 7 - passing test, but it overran the plan
ok 8 - Passing with no_plan
ok 9 - still passing after a test
ok 10 - and another test
ok 11 - and after the ending
ok 12 - Passing with skip_all
ok 13 - All tests passed but done_testing() does not match
ok 14 - No tests run with done_testing()
ok 15 - All tests passed with done_testing()
1..15
ok
t/Legacy/Builder/maybe_regex.t .................
1..16
ok 1 - qr// detected
ok 2 - qr// good match
ok 3 - qr// bad match
ok 4 - blessed regex detected
ok 5 - blessed qr/foo/ good match
ok 6 - blessed qr/foo/ bad math
ok 7 - "//" detected
ok 8 - "//" good match
ok 9 - "//" bad match
ok 10 - non-regex detected
ok 11 - non-regex detected
ok 12 - "//" good match
ok 13 - "//" bad match
ok 14 - m,, detected
ok 15 - "//" good match
ok 16 - "//" bad match
ok
t/Legacy/Builder/no_diag.t .....................
1..2
ok 1 - foo
ok 2
ok
t/Legacy/Builder/no_ending.t ...................
1..3
ok 1
ok 2
ok 3
ok
t/Legacy/Builder/no_header.t ...................
1..1
ok 1
ok
t/Legacy/Builder/no_plan_at_all.t ..............
1..1
ok 1 - proper behavior when no plan is seen
ok
t/Legacy/Builder/ok_obj.t ......................
1..4
ok 1 - created Foo object
ok 2 - created Foo object
ok 3 - created Foo object
ok 4 - DESTROY called 3 times
ok
t/Legacy/Builder/output.t ......................
1..6
ok 1
ok 2
ok 3
ok 4
ok 5 - One scalar, two filehandles
ok 6
ok
t/Legacy/Builder/reset.t .......................
ok 1 - exported_to
ok 2 - expected_tests
ok 3 - level
ok 4 - use_numbers
ok 5 - no_header
ok 6 - no_ending
ok 7 - current_test
ok 8 - summary
ok 9 - details
ok 10 - output
ok 11 - failure_output
ok 12 - todo_output
ok 13 - final test to make sure output was reset
1..13
ok
t/Legacy/Builder/reset_outputs.t ...............
ok 1
ok 2
ok 3
ok 4 - reset_outputs() resets output
ok 5 - reset_outputs() resets failure_output
ok 6 - reset_outputs() resets todo_output
1..6
ok
t/Legacy/Builder/try.t .........................
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
1..8
ok
t/Legacy/c_flag.t ..............................
1..1
ok 1
ok
t/Legacy/capture.t .............................
1..3
ok 1 - current test
ok 2 - can't set test_num
ok 3 - res count
ok
t/Legacy/check_tests.t .........................
1..105
ok 1 - Test 'pass' completed
ok 2 - Test 'pass' no premature diagnostication
ok 3 - Test 'pass' result count
ok 4 - subtest 'pass' of 'pass' compare ok
ok 5 - subtest 'pass' of 'pass' compare actual_ok
ok 6 - subtest 'pass' of 'pass' compare type
ok 7 - subtest 'pass' of 'pass' compare reason
ok 8 - subtest 'pass' of 'pass' compare name
ok 9 - checking depth
ok 10 - subtest 'pass' of 'pass' compare diag
ok 11 - Test 'pass diag' completed
ok 12 - Test 'pass diag' no premature diagnostication
ok 13 - Test 'pass diag' result count
ok 14 - subtest 'pass diag' of 'pass diag' compare ok
ok 15 - subtest 'pass diag' of 'pass diag' compare actual_ok
ok 16 - subtest 'pass diag' of 'pass diag' compare type
ok 17 - subtest 'pass diag' of 'pass diag' compare reason
ok 18 - subtest 'pass diag' of 'pass diag' compare name
ok 19 - checking depth
ok 20 - subtest 'pass diag' of 'pass diag' compare diag
ok 21 - Test 'pass diag no \n' completed
ok 22 - Test 'pass diag no \n' no premature diagnostication
ok 23 - Test 'pass diag no \n' result count
ok 24 - subtest 'pass diag' of 'pass diag no \n' compare ok
ok 25 - subtest 'pass diag' of 'pass diag no \n' compare actual_ok
ok 26 - subtest 'pass diag' of 'pass diag no \n' compare type
ok 27 - subtest 'pass diag' of 'pass diag no \n' compare reason
ok 28 - subtest 'pass diag' of 'pass diag no \n' compare name
ok 29 - checking depth
ok 30 - subtest 'pass diag' of 'pass diag no \n' compare diag
ok 31 - Test 'fail' completed
ok 32 - Test 'fail' no premature diagnostication
ok 33 - Test 'fail' result count
ok 34 - subtest 'fail' of 'fail' compare ok
ok 35 - subtest 'fail' of 'fail' compare actual_ok
ok 36 - subtest 'fail' of 'fail' compare type
ok 37 - subtest 'fail' of 'fail' compare reason
ok 38 - subtest 'fail' of 'fail' compare name
ok 39 - checking depth
ok 40 - subtest 'fail' of 'fail' compare diag
ok 41 - Test 'skip' completed
ok 42 - Test 'skip' no premature diagnostication
ok 43 - Test 'skip' result count
ok 44 - subtest '' of 'skip' compare ok
ok 45 - subtest '' of 'skip' compare actual_ok
ok 46 - subtest '' of 'skip' compare type
ok 47 - subtest '' of 'skip' compare reason
ok 48 - subtest '' of 'skip' compare name
ok 49 - checking depth
ok 50 - subtest '' of 'skip' compare diag
ok 51 - Test 'todo_skip' completed
ok 52 - Test 'todo_skip' no premature diagnostication
ok 53 - Test 'todo_skip' result count
ok 54 - subtest '' of 'todo_skip' compare ok
ok 55 - subtest '' of 'todo_skip' compare actual_ok
ok 56 - subtest '' of 'todo_skip' compare type
ok 57 - subtest '' of 'todo_skip' compare reason
ok 58 - subtest '' of 'todo_skip' compare name
ok 59 - checking depth
ok 60 - subtest '' of 'todo_skip' compare diag
ok 61 - Test 'run all' completed
ok 62 - Test 'run all' no premature diagnostication
ok 63 - Test 'run all' result count
ok 64 - subtest 'pass' of 'run all' compare ok
ok 65 - subtest 'pass' of 'run all' compare actual_ok
ok 66 - subtest 'pass' of 'run all' compare type
ok 67 - subtest 'pass' of 'run all' compare reason
ok 68 - subtest 'pass' of 'run all' compare name
ok 69 - checking depth
ok 70 - subtest 'pass' of 'run all' compare diag
ok 71 - subtest 'pass diag' of 'run all' compare ok
ok 72 - subtest 'pass diag' of 'run all' compare actual_ok
ok 73 - subtest 'pass diag' of 'run all' compare type
ok 74 - subtest 'pass diag' of 'run all' compare reason
ok 75 - subtest 'pass diag' of 'run all' compare name
ok 76 - checking depth
ok 77 - subtest 'pass diag' of 'run all' compare diag
ok 78 - subtest 'pass diag' of 'run all' compare ok
ok 79 - subtest 'pass diag' of 'run all' compare actual_ok
ok 80 - subtest 'pass diag' of 'run all' compare type
ok 81 - subtest 'pass diag' of 'run all' compare reason
ok 82 - subtest 'pass diag' of 'run all' compare name
ok 83 - checking depth
ok 84 - subtest 'pass diag' of 'run all' compare diag
ok 85 - subtest 'fail' of 'run all' compare ok
ok 86 - subtest 'fail' of 'run all' compare actual_ok
ok 87 - subtest 'fail' of 'run all' compare type
ok 88 - subtest 'fail' of 'run all' compare reason
ok 89 - subtest 'fail' of 'run all' compare name
ok 90 - checking depth
ok 91 - subtest 'fail' of 'run all' compare diag
ok 92 - subtest '' of 'run all' compare ok
ok 93 - subtest '' of 'run all' compare actual_ok
ok 94 - subtest '' of 'run all' compare type
ok 95 - subtest '' of 'run all' compare reason
ok 96 - subtest '' of 'run all' compare name
ok 97 - checking depth
ok 98 - subtest '' of 'run all' compare diag
ok 99 - subtest '' of 'run all' compare ok
ok 100 - subtest '' of 'run all' compare actual_ok
ok 101 - subtest '' of 'run all' compare type
ok 102 - subtest '' of 'run all' compare reason
ok 103 - subtest '' of 'run all' compare name
ok 104 - checking depth
ok 105 - subtest '' of 'run all' compare diag
ok
t/Legacy/circular_data.t .......................
1..11
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok
t/Legacy/cmp_ok.t ..............................
1..24
ok 1 - right return
ok 2 - passed without diagnostic
ok 3 - right return
ok 4 - failed without diagnostic
ok 5 - right return
ok 6 - failed without diagnostic
ok 7 - right return
ok 8 - passed without diagnostic
ok 9 - right return
ok 10 - passed without diagnostic
ok 11 - right return
ok 12 - failed without diagnostic
ok 13 - right return
ok 14 - passed without diagnostic
ok 15 - right return
ok 16 - passed without diagnostic
ok 17 - right return
ok 18 - expected error
ok 19 - right return
ok 20 - expected error
ok 21 - right return
ok 22 - expected error
ok 23 - right return
ok 24 - expected error
ok
t/Legacy/depth.t ...............................
1..2
ok 1 - depth 1
ok 2 - deeper
ok
t/Legacy/diag.t ................................
1..7
ok 1 - diag() with todo_output set
ok 2 - multi line
ok 3 - diag returns false
ok 4 - diag() adds \# even if there's one already
ok 5 - blank lines get escaped
ok 6 - even at the end
ok 7
ok
t/Legacy/died.t ................................
1..3
ok 1
ok 2
ok 3 - exit code
ok
t/Legacy/dont_overwrite_die_handler.t ..........
1..2
ok 1
ok 2 - existing DIE handler not overridden
ok
t/Legacy/eq_set.t ..............................
1..4
ok 1
ok 2
ok 3
not ok 4 # TODO eq_set() doesn't really handle references
# Failed (TODO) test at t/Legacy/eq_set.t line 32.
ok
t/Legacy/exit.t ................................
# Building up a map of exit codes. May take a while.
ok 1 - exit map test for 0
ok 2 - exit map test for 1
ok 3 - exit map test for 2
ok 4 - exit map test for 3
ok 5 - exit map test for 4
ok 6 - exit map test for 5
ok 7 - exit map test for 6
ok 8 - exit map test for 7
ok 9 - exit map test for 8
ok 10 - exit map test for 9
ok 11 - exit map test for 10
ok 12 - exit map test for 11
ok 13 - exit map test for 12
ok 14 - exit map test for 13
ok 15 - exit map test for 14
ok 16 - exit map test for 15
ok 17 - exit map test for 16
ok 18 - exit map test for 17
ok 19 - exit map test for 18
ok 20 - exit map test for 19
ok 21 - exit map test for 20
ok 22 - exit map test for 21
ok 23 - exit map test for 22
ok 24 - exit map test for 23
ok 25 - exit map test for 24
ok 26 - exit map test for 25
ok 27 - exit map test for 26
ok 28 - exit map test for 27
ok 29 - exit map test for 28
ok 30 - exit map test for 29
ok 31 - exit map test for 30
ok 32 - exit map test for 31
ok 33 - exit map test for 32
ok 34 - exit map test for 33
ok 35 - exit map test for 34
ok 36 - exit map test for 35
ok 37 - exit map test for 36
ok 38 - exit map test for 37
ok 39 - exit map test for 38
ok 40 - exit map test for 39
ok 41 - exit map test for 40
ok 42 - exit map test for 41
ok 43 - exit map test for 42
ok 44 - exit map test for 43
ok 45 - exit map test for 44
ok 46 - exit map test for 45
ok 47 - exit map test for 46
ok 48 - exit map test for 47
ok 49 - exit map test for 48
ok 50 - exit map test for 49
ok 51 - exit map test for 50
ok 52 - exit map test for 51
ok 53 - exit map test for 52
ok 54 - exit map test for 53
ok 55 - exit map test for 54
ok 56 - exit map test for 55
ok 57 - exit map test for 56
ok 58 - exit map test for 57
ok 59 - exit map test for 58
ok 60 - exit map test for 59
ok 61 - exit map test for 60
ok 62 - exit map test for 61
ok 63 - exit map test for 62
ok 64 - exit map test for 63
ok 65 - exit map test for 64
ok 66 - exit map test for 65
ok 67 - exit map test for 66
ok 68 - exit map test for 67
ok 69 - exit map test for 68
ok 70 - exit map test for 69
ok 71 - exit map test for 70
ok 72 - exit map test for 71
ok 73 - exit map test for 72
ok 74 - exit map test for 73
ok 75 - exit map test for 74
ok 76 - exit map test for 75
ok 77 - exit map test for 76
ok 78 - exit map test for 77
ok 79 - exit map test for 78
ok 80 - exit map test for 79
ok 81 - exit map test for 80
ok 82 - exit map test for 81
ok 83 - exit map test for 82
ok 84 - exit map test for 83
ok 85 - exit map test for 84
ok 86 - exit map test for 85
ok 87 - exit map test for 86
ok 88 - exit map test for 87
ok 89 - exit map test for 88
ok 90 - exit map test for 89
ok 91 - exit map test for 90
ok 92 - exit map test for 91
ok 93 - exit map test for 92
ok 94 - exit map test for 93
ok 95 - exit map test for 94
ok 96 - exit map test for 95
ok 97 - exit map test for 96
ok 98 - exit map test for 97
ok 99 - exit map test for 98
ok 100 - exit map test for 99
ok 101 - exit map test for 100
ok 102 - exit map test for 101
ok 103 - exit map test for 102
ok 104 - exit map test for 103
ok 105 - exit map test for 104
ok 106 - exit map test for 105
ok 107 - exit map test for 106
ok 108 - exit map test for 107
ok 109 - exit map test for 108
ok 110 - exit map test for 109
ok 111 - exit map test for 110
ok 112 - exit map test for 111
ok 113 - exit map test for 112
ok 114 - exit map test for 113
ok 115 - exit map test for 114
ok 116 - exit map test for 115
ok 117 - exit map test for 116
ok 118 - exit map test for 117
ok 119 - exit map test for 118
ok 120 - exit map test for 119
ok 121 - exit map test for 120
ok 122 - exit map test for 121
ok 123 - exit map test for 122
ok 124 - exit map test for 123
ok 125 - exit map test for 124
ok 126 - exit map test for 125
ok 127 - exit map test for 126
ok 128 - exit map test for 127
ok 129 - exit map test for 128
ok 130 - exit map test for 129
ok 131 - exit map test for 130
ok 132 - exit map test for 131
ok 133 - exit map test for 132
ok 134 - exit map test for 133
ok 135 - exit map test for 134
ok 136 - exit map test for 135
ok 137 - exit map test for 136
ok 138 - exit map test for 137
ok 139 - exit map test for 138
ok 140 - exit map test for 139
ok 141 - exit map test for 140
ok 142 - exit map test for 141
ok 143 - exit map test for 142
ok 144 - exit map test for 143
ok 145 - exit map test for 144
ok 146 - exit map test for 145
ok 147 - exit map test for 146
ok 148 - exit map test for 147
ok 149 - exit map test for 148
ok 150 - exit map test for 149
ok 151 - exit map test for 150
ok 152 - exit map test for 151
ok 153 - exit map test for 152
ok 154 - exit map test for 153
ok 155 - exit map test for 154
ok 156 - exit map test for 155
ok 157 - exit map test for 156
ok 158 - exit map test for 157
ok 159 - exit map test for 158
ok 160 - exit map test for 159
ok 161 - exit map test for 160
ok 162 - exit map test for 161
ok 163 - exit map test for 162
ok 164 - exit map test for 163
ok 165 - exit map test for 164
ok 166 - exit map test for 165
ok 167 - exit map test for 166
ok 168 - exit map test for 167
ok 169 - exit map test for 168
ok 170 - exit map test for 169
ok 171 - exit map test for 170
ok 172 - exit map test for 171
ok 173 - exit map test for 172
ok 174 - exit map test for 173
ok 175 - exit map test for 174
ok 176 - exit map test for 175
ok 177 - exit map test for 176
ok 178 - exit map test for 177
ok 179 - exit map test for 178
ok 180 - exit map test for 179
ok 181 - exit map test for 180
ok 182 - exit map test for 181
ok 183 - exit map test for 182
ok 184 - exit map test for 183
ok 185 - exit map test for 184
ok 186 - exit map test for 185
ok 187 - exit map test for 186
ok 188 - exit map test for 187
ok 189 - exit map test for 188
ok 190 - exit map test for 189
ok 191 - exit map test for 190
ok 192 - exit map test for 191
ok 193 - exit map test for 192
ok 194 - exit map test for 193
ok 195 - exit map test for 194
ok 196 - exit map test for 195
ok 197 - exit map test for 196
ok 198 - exit map test for 197
ok 199 - exit map test for 198
ok 200 - exit map test for 199
ok 201 - exit map test for 200
ok 202 - exit map test for 201
ok 203 - exit map test for 202
ok 204 - exit map test for 203
ok 205 - exit map test for 204
ok 206 - exit map test for 205
ok 207 - exit map test for 206
ok 208 - exit map test for 207
ok 209 - exit map test for 208
ok 210 - exit map test for 209
ok 211 - exit map test for 210
ok 212 - exit map test for 211
ok 213 - exit map test for 212
ok 214 - exit map test for 213
ok 215 - exit map test for 214
ok 216 - exit map test for 215
ok 217 - exit map test for 216
ok 218 - exit map test for 217
ok 219 - exit map test for 218
ok 220 - exit map test for 219
ok 221 - exit map test for 220
ok 222 - exit map test for 221
ok 223 - exit map test for 222
ok 224 - exit map test for 223
ok 225 - exit map test for 224
ok 226 - exit map test for 225
ok 227 - exit map test for 226
ok 228 - exit map test for 227
ok 229 - exit map test for 228
ok 230 - exit map test for 229
ok 231 - exit map test for 230
ok 232 - exit map test for 231
ok 233 - exit map test for 232
ok 234 - exit map test for 233
ok 235 - exit map test for 234
ok 236 - exit map test for 235
ok 237 - exit map test for 236
ok 238 - exit map test for 237
ok 239 - exit map test for 238
ok 240 - exit map test for 239
ok 241 - exit map test for 240
ok 242 - exit map test for 241
ok 243 - exit map test for 242
ok 244 - exit map test for 243
ok 245 - exit map test for 244
ok 246 - exit map test for 245
ok 247 - exit map test for 246
ok 248 - exit map test for 247
ok 249 - exit map test for 248
ok 250 - exit map test for 249
ok 251 - exit map test for 250
ok 252 - exit map test for 251
ok 253 - exit map test for 252
ok 254 - exit map test for 253
ok 255 - exit map test for 254
ok 256 - exit map test for 255
# Done.
ok 257 - death_with_handler.plx exited with 255 (expected 255)
ok 258 - one_fail_without_plan.plx exited with 1 (expected 1)
ok 259 - five_fail.plx exited with 5 (expected 5)
ok 260 - pre_plan_death.plx exited with 9 (expected non-zero)
ok 261 - success.plx exited with 0 (expected 0)
ok 262 - require.plx exited with 0 (expected 0)
ok 263 - one_fail.plx exited with 1 (expected 1)
ok 264 - death_in_eval.plx exited with 0 (expected 0)
ok 265 - two_fail.plx exited with 2 (expected 2)
ok 266 - too_few_fail.plx exited with 2 (expected 2)
ok 267 - last_minute_death.plx exited with 255 (expected 255)
ok 268 - death.plx exited with 255 (expected 255)
ok 269 - extras.plx exited with 2 (expected 2)
ok 270 - too_few.plx exited with 255 (expected 255)
ok 271 - missing_done_testing.plx exited with 254 (expected 254)
ok 272 - exit.plx exited with 1 (expected 1)
1..272
ok
t/Legacy/explain.t .............................
1..5
ok 1 - main->can('explain')
ok 2
ok 3
ok 4
ok 5
ok
t/Legacy/explain_err_vars.t ....................
ok 1 - preserved $@
1..1
ok
t/Legacy/extra.t ...............................
ok 1
ok 2
ok 3
ok 4
ok 5
1..5
ok
t/Legacy/extra_one.t ...........................
1..2
ok 1
ok 2
ok
t/Legacy/fail-like.t ...........................
1..4
ok 1 - failing output
ok 2 - failing errors
ok 3
ok 4
ok
t/Legacy/fail-more.t ...........................
1..80
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok 32
ok 33
ok 34
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41
ok 42
ok 43
ok 44
ok 45
ok 46
ok 47
ok 48
ok 49
ok 50
ok 51
ok 52
ok 53
ok 54
ok 55
ok 56
ok 57
ok 58
ok 59
ok 60
ok 61
ok 62
ok 63
ok 64
ok 65
ok 66
ok 67
ok 68
not ok 69 # TODO cmp_ok() gives the wrong "expected" for undef
# Failed (TODO) test at t/Legacy/fail-more.t line 446.
# got: '# Failed test 'undef ne empty string'
# # at t/Legacy/fail-more.t line 437.
# # got: undef
# # expected: anything else
# '
# expected: '# Failed test 'undef ne empty string'
# # at t/Legacy/fail-more.t line 437.
# # got: undef
# # expected: ''
# '
ok 70
ok 71
ok 72
ok 73
ok 74
ok 75
ok 76
ok 77
ok 78
ok 79
ok 80
ok
t/Legacy/fail.t ................................
ok 1
ok 2
1..2
ok
t/Legacy/fail_one.t ............................
ok 1
ok 2
1..2
ok
t/Legacy/filehandles.t .........................
1..1
ok 1 - STDOUT can be mucked with
ok
t/Legacy/fork.t ................................
1..1
ok 1 - Only the parent should process the ending, not the child
ok
t/Legacy/harness_active.t ......................
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/Legacy/import.t ..............................
1..2
ok 1 - main->can(...)
ok 2 - fail() not exported
ok
t/Legacy/is_deeply_dne_bug.t ...................
1..2
ok 1
ok 2
ok
t/Legacy/is_deeply_fail.t ......................
1..100
ok 1
ok 2 - plain strings
ok 3 - right diagnostic
ok 4
ok 5 - different types
ok 6 - right diagnostic
ok 7
ok 8 - hashes with different values
ok 9 - right diagnostic
ok 10
ok 11 - hashes with different keys
ok 12 - right diagnostic
ok 13
ok 14 - arrays of different length
ok 15 - right diagnostic
ok 16
ok 17 - arrays of undefs
ok 18 - right diagnostic
ok 19
ok 20 - hashes of undefs
ok 21 - right diagnostic
ok 22
ok 23 - scalar refs
ok 24 - right diagnostic
ok 25
ok 26 - mixed scalar and array refs
ok 27 - right diagnostic
ok 28
ok 29 - deep scalar refs
ok 30 - right diagnostic
ok 31
ok 32 - @Data_Stack not holding onto things
ok 33 - deep structures
ok 34 - right diagnostic
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41 - undef != ""
ok 42 - @Data_Stack not holding onto things
ok 43 - don't compare refs like strings
ok 44 - even deep inside
ok 45 - [] could match non-existent values
ok 46
ok 47
ok 48 - scalar refs in an array
ok 49 - right diagnostic
ok 50
ok 51 - scalar vs ref
ok 52 - right diagnostic
ok 53
ok 54 - ref vs scalar
ok 55 - right diagnostic
ok 56
ok 57 - is_deeply and undef [RT 9441]
ok 58 - right diagnostic
ok 59
ok 60 - is_deeply and different reference types
ok 61 - right diagnostic
ok 62
ok 63 - nested different ref types
ok 64 - right diagnostic
ok 65
ok 66 - string overloaded refs respected in diag
ok 67 - right diagnostic
ok 68 - function refs
ok 69
ok 70 - right diagnostic
ok 71 - typeglobs
ok 72
ok 73 - right diagnostic
ok 74
ok 75
ok 76 - right diagnostic
ok 77
ok 78
ok 79
ok 80
ok 81
ok 82
ok 83
ok 84
ok 85
ok 86
ok 87
ok 88
ok 89
ok 90
ok 91
ok 92
ok 93
ok 94
ok 95
ok 96
ok 97
ok 98
ok 99
ok 100
ok
t/Legacy/is_deeply_with_threads.t .............. skipped: many perls have broken threads. Enable with AUTHOR_TESTING.
t/Legacy/missing.t .............................
1..2
ok 1
ok 2
ok
t/Legacy/More.t ................................
1..54
ok 1 - use Dummy;
ok 2 - use_ok() loads a module
ok 3 - require Test::More;
ok 4 - two is two is two is two
ok 5 - foo is foo
ok 6 - foo isnt bar
ok 7 - foo isn't bar
ok 8 - foo is like fooble
ok 9 - foo is like FooBle
ok 10 - regexes with slashes in like
ok 11 - unlike bar
ok 12 - foo is unlike FooBle
ok 13 - regexes with slashes in unlike
ok 14
ok 15 - Test::More->can(...)
ok 16 - Test::More->can(...)
ok 17 - An object of class 'Foo' isa 'Foo'
ok 18 - A reference of type 'ARRAY' isa 'ARRAY'
ok 19 - A reference of type 'SCALAR' isa 'SCALAR'
ok 20 - The class (or class-like) 'Foo' isa 'Bar'
ok 21
ok 22
ok 23 - Foo->can('blah')
ok 24 - An object of class 'Foo' isa 'blah'
ok 25 - pass() passed
ok 26 - eq_array with simple arrays
ok 27 - @Data_Stack not holding onto things
ok 28 - eq_hash with simple hashes
ok 29
ok 30 - eq_set with simple sets
ok 31
ok 32 - is_deeply with arrays
ok 33 - eq_array with complicated arrays
ok 34 - eq_set with complicated arrays
ok 35 - eq_array with slightly different complicated arrays
ok 36
ok 37 - eq_set with slightly different complicated arrays
ok 38
ok 39 - is_deeply with complicated hashes
ok 40 - eq_hash with complicated hashes
ok 41 - eq_hash with slightly different complicated hashes
ok 42
ok 43 - builder()
ok 44 - cmp_ok ==
ok 45 - eq
ok 46 - <
ok 47 - ||
ok 48 - An object of class 'Wibble' isa 'Wibblemeister'
ok 49 - the same function ref
ok 50 - the same glob
ok 51
ok 52 - same regex
ok 53 - $@ untouched
ok 54 - $! untouched
ok
t/Legacy/new_ok.t ..............................
1..13
ok 1 - An object of class 'Foo' isa 'Foo'
ok 2
ok 3 - An object of class 'Foo' isa 'Foo'
ok 4 - An object of class 'Bar' isa 'Bar'
ok 5
ok 6 - An object of class 'Bar' isa 'Bar'
ok 7 - An object of class 'Foo' isa 'Foo'
ok 8
ok 9 - An object of class 'Foo' isa 'Foo'
ok 10 - 'Foo' isa 'Foo'
ok 11
ok 12 - An object of class 'Foo' isa 'Foo'
ok 13
ok
t/Legacy/no_plan.t .............................
1..7
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok
t/Legacy/no_tests.t ............................
1..3
ok 1
ok 2
ok 3 - exit code
ok
t/Legacy/note.t ................................
1..2
ok 1
ok 2
ok
t/Legacy/overload.t ............................
1..19
ok 1 - An object of class 'Overloaded' isa 'Overloaded'
ok 2 - cmp_ok() eq
ok 3 - does not stringify
ok 4 - is() with string overloading
ok 5 - cmp_ok() with number overloading
ok 6 - does not numify
ok 7 - is_deeply with string overloading
ok 8 - eq_array ...
ok 9 - eq_hash ...
ok 10 - is_deeply with string overloading at the top
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16 - An object of class 'Overloaded' isa 'Overloaded'
ok 17 - cmp_ok() eq
ok 18 - does not stringify
ok 19 - is() with string overloading
ok
t/Legacy/overload_threads.t ....................
1..5
ok 1 - foo
ok 2 -
ok 3
not ok 4 - Just checking todo as an overloaded value # TODO not really todo, testing overloaded reason
# Failed (TODO) test 'Just checking todo as an overloaded value'
# at t/Legacy/overload_threads.t line 54.
ok 5 # skip not really skipped, testing overloaded reason
ok
t/Legacy/plan.t ................................
1..4
ok 1 - disallow double plan
ok 2 - disallow changing plan
ok 3 - Just testing plan()
ok 4 - Testing it some more
ok
t/Legacy/plan_bad.t ............................
1..12
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok
t/Legacy/plan_is_noplan.t ......................
1..1
ok 1
ok
t/Legacy/plan_no_plan.t ........................
ok 1 - Just testing
ok 2 - Testing again
ok 3 # skip Just testing skip with no_plan
ok 4 - skip with no "how_many" ok with no_plan
not ok 5 # TODO & SKIP Just testing todo_skip
ok 6 - skip with no "how_many" ok with no_plan
1..6
ok
t/Legacy/plan_shouldnt_import.t ................
1..1
ok 1 - plan should not export
ok
t/Legacy/plan_skip_all.t ....................... skipped: Just testing plan & skip_all
t/Legacy/Regression/637.t ......................
ok 1
ok 2
ok 1
ok 2
ok 3
1..3
ok 3
ok 4
ok 5
ok 6
1..6
ok
t/Legacy/require_ok.t ..........................
1..8
ok 1 - require Symbol;
ok 2 - require_ok MODULE
ok 3 - require 'Class/Struct.pm';
ok 4 - require_ok FILE
ok 5
ok 6
ok 7
ok 8
ok
t/Legacy/run_test.t ............................
1..54
ok 1 - run pass no prem
ok 2 - run pass result count
ok 3 - run pass name
ok 4 - run pass ok
ok 5 - run pass actual_ok
ok 6 - run pass reason
ok 7 - run pass type
ok 8 - run pass diag
ok 9 - run pass depth
ok 10 - run fail no prem
ok 11 - run fail result count
ok 12 - run fail name
ok 13 - run fail actual_ok
ok 14 - run fail ok
ok 15 - run fail reason
ok 16 - run fail type
ok 17 - run fail diag
ok 18 - run fail depth
ok 19 - skip no prem
ok 20 - skip result count
ok 21 - skip name
ok 22 - skip actual_ok
ok 23 - skip ok
ok 24 - skip reason
ok 25 - skip type
ok 26 - skip diag
ok 27 - skip depth
ok 28 - todo_skip no prem
ok 29 - todo_skip result count
ok 30 - todo_skip name
ok 31 - todo_skip actual_ok
ok 32 - todo_skip ok
ok 33 - todo_skip reason
ok 34 - todo_skip type
ok 35 - todo_skip diag
ok 36 - todo_skip depth
ok 37 - run diag prem
ok 38 - run diag result count
ok 39 - run multi no prem
ok 40 - run multi result count
ok 41 - run multi pass name
ok 42 - run multi pass actual_ok
ok 43 - run multi pass ok
ok 44 - run multi pass reason
ok 45 - run multi pass type
ok 46 - run multi pass diag
ok 47 - run multi pass depth
ok 48 - run multi fail name
ok 49 - run multi fail actual_ok
ok 50 - run multi fail ok
ok 51 - run multi fail reason
ok 52 - run multi fail type
ok 53 - run multi fail diag
ok 54 - run multi fail depth
ok
t/Legacy/simple.t ..............................
1..3
ok 1 - compile
ok 2
ok 3 - foo
ok
t/Legacy/Simple/load.t .........................
1..1
ok 1 - use Test::Simple with no arguments
ok
t/Legacy/skip.t ................................
1..17
ok 1 # skip Just testing the skip interface.
ok 2 # skip Just testing the skip interface.
ok 3 - Inside skip block
ok 4 - Another inside
ok 5 - calling package not interfered with
ok 6 - or file
ok 7 - or line
ok 8 # skip Just testing the skip interface.
ok 9 # skip Just testing the skip interface.
ok 10 # skip Just testing the skip interface.
ok 11 - skip without $how_many warning
ok 12 - This is supposed to run
ok 13 # skip Just testing the skip interface.
ok 14 # skip Just testing the skip interface.
ok 15 - This is supposed to run, too
ok 16 # skip 1
ok 17
ok
t/Legacy/skipall.t .............................
1..2
ok 1
ok 2
ok
t/Legacy/strays.t .............................. skipped: not completed
t/Legacy/subtest/args.t ........................
ok 1
ok 2
ok 3
ok 4
# Subtest: Arg passing
ok 1
1..1
ok 5 - Arg passing
ok 6
1..6
ok
t/Legacy/subtest/bail_out.t ....................
1..2
ok 1
ok 2
ok
t/Legacy/subtest/basic.t .......................
1..12
ok 1 - Output should nest properly
ok 2 - We should allow arbitrary nesting
ok 3 - Previous child failures should not force subsequent failures
ok 4 - The child should copy the (Out_FH) filehandle
ok 5 - The child should copy the (Todo_FH) filehandle
ok 6 - The child should copy the (Fail_FH) filehandle
ok 7 - Test::Builder::NoOutput->can('parent')
ok 8 - Test::Builder::NoOutput->can('name')
ok 9 - ... but child names should be whatever we set them to
# Subtest: skip all
1..0 # SKIP subtest with skip_all
ok 10 # skip subtest with skip_all
ok 11 - TODO tests should not make the parent test fail
ok 12 - Not running subtests should make the parent test fail
ok
t/Legacy/subtest/die.t .........................
ok 1
ok 2
ok 3 - the parent object is restored after a die
1..3
ok
t/Legacy/subtest/do.t ..........................
ok 1 - First
ok 2 - subtest test file exists
# Subtest: t/Legacy/subtest/for_do_t.test
ok 1 - First
ok 2 - Second
ok 3 - Third
1..3
ok 3 - t/Legacy/subtest/for_do_t.test
ok 4 - Last
1..4
ok
t/Legacy/subtest/events.t ......................
ok 1 - An object of class 'Test2::Event::Subtest' isa 'Test2::Event::Subtest'
ok 2 - got an id
ok 3 - set subtest_id on child event
ok 4 - set subtest_id on child event
1..4
ok
t/Legacy/subtest/fork.t ........................
1..1
# Subtest: fork within subtest
1..2
ok 1 - child exit status
ok 2 - child output
ok 1 - fork within subtest
ok
t/Legacy/subtest/implicit_done.t ...............
ok 1 - Before
# Subtest: basic
ok 1 - Inside sub test
1..1
ok 2 - basic
# Subtest: with done
ok 1 - This has done_testing
1..1
ok 3 - with done
# Subtest: with plan
1..1
ok 1 - I have a plan, Batman!
ok 4 - with plan
# Subtest: skipping
1..0 # SKIP Skipping
ok 5 # skip Skipping
ok 6 - After
1..6
ok
t/Legacy/subtest/line_numbers.t ................
1..5
ok 1 - un-named inner tests
ok 2 - named inner tests
ok 3 - subtest() called from a sub
ok 4 - lineno in 'No tests run' diagnostic
ok 5 - diag indent for is() in subtest
ok
t/Legacy/subtest/predicate.t ...................
1..5
ok 1 - foobar_ok failing line numbers
ok 2 - foobar_ok_2 failing line numbers
ok 3 - barfoo_ok failing line numbers
ok 4 - barfoo_ok_2 failing line numbers
ok 5 - outergroup with internal barfoo_ok_2 failing line numbers
ok
t/Legacy/subtest/singleton.t ...................
1..3
ok 1 - TB top level
# Subtest: doing a subtest
1..4
ok 1 - first test in subtest
ok 2 - this should not fail
ok 3 - second test in subtest
ok 4 - this should not fail
ok 2 - doing a subtest
ok 3 - left subtest
ok
t/Legacy/subtest/threads.t .....................
# Subtest: simple test with threads on
ok 1 - simple test
ok 2 - another simple test
1..2
ok 1 - simple test with threads on
ok 2 - Parent retains sharedness
1..2
ok
t/Legacy/subtest/todo.t ........................
1..96
ok 1 - plan, no tests run (1), todo [Reason] set via $TODO
ok 2 - plan, no tests run (1), todo [Reason] set via todo_start
ok 3 - plan, no tests run (1), todo [] set via todo_start
ok 4 - plan, no tests run (1), todo [0] set via todo_start
ok 5 - plan, no tests run (2), todo [Reason] set via $TODO
ok 6 - plan, no tests run (2), todo [Reason] set via todo_start
ok 7 - plan, no tests run (2), todo [] set via todo_start
ok 8 - plan, no tests run (2), todo [0] set via todo_start
ok 9 - plan, no tests run (3), todo [Reason] set via $TODO
ok 10 - plan, no tests run (3), todo [Reason] set via todo_start
ok 11 - plan, no tests run (3), todo [] set via todo_start
ok 12 - plan, no tests run (3), todo [0] set via todo_start
ok 13 - noplan, no tests run (1), todo [Reason] set via $TODO
ok 14 - noplan, no tests run (1), todo [Reason] set via todo_start
ok 15 - noplan, no tests run (1), todo [] set via todo_start
ok 16 - noplan, no tests run (1), todo [0] set via todo_start
ok 17 - noplan, no tests run (2), todo [Reason] set via $TODO
ok 18 - noplan, no tests run (2), todo [Reason] set via todo_start
ok 19 - noplan, no tests run (2), todo [] set via todo_start
ok 20 - noplan, no tests run (2), todo [0] set via todo_start
ok 21 - noplan, no tests run (3), todo [Reason] set via $TODO
ok 22 - noplan, no tests run (3), todo [Reason] set via todo_start
ok 23 - noplan, no tests run (3), todo [] set via todo_start
ok 24 - noplan, no tests run (3), todo [0] set via todo_start
ok 25 - missingplan, no tests run (1), todo [Reason] set via $TODO
ok 26 - missingplan, no tests run (1), todo [Reason] set via todo_start
ok 27 - missingplan, no tests run (1), todo [] set via todo_start
ok 28 - missingplan, no tests run (1), todo [0] set via todo_start
ok 29 - missingplan, no tests run (2), todo [Reason] set via $TODO
ok 30 - missingplan, no tests run (2), todo [Reason] set via todo_start
ok 31 - missingplan, no tests run (2), todo [] set via todo_start
ok 32 - missingplan, no tests run (2), todo [0] set via todo_start
ok 33 - missingplan, no tests run (3), todo [Reason] set via $TODO
ok 34 - missingplan, no tests run (3), todo [Reason] set via todo_start
ok 35 - missingplan, no tests run (3), todo [] set via todo_start
ok 36 - missingplan, no tests run (3), todo [0] set via todo_start
ok 37 - donetesting, no tests run (1), todo [Reason] set via $TODO
ok 38 - donetesting, no tests run (1), todo [Reason] set via todo_start
ok 39 - donetesting, no tests run (1), todo [] set via todo_start
ok 40 - donetesting, no tests run (1), todo [0] set via todo_start
ok 41 - donetesting, no tests run (2), todo [Reason] set via $TODO
ok 42 - donetesting, no tests run (2), todo [Reason] set via todo_start
ok 43 - donetesting, no tests run (2), todo [] set via todo_start
ok 44 - donetesting, no tests run (2), todo [0] set via todo_start
ok 45 - donetesting, no tests run (3), todo [Reason] set via $TODO
ok 46 - donetesting, no tests run (3), todo [Reason] set via todo_start
ok 47 - donetesting, no tests run (3), todo [] set via todo_start
ok 48 - donetesting, no tests run (3), todo [0] set via todo_start
ok 49 - 1 failed test (1), todo [Reason] set via $TODO
ok 50 - 1 failed test (1), todo [Reason] set via todo_start
ok 51 - 1 failed test (1), todo [] set via todo_start
ok 52 - 1 failed test (1), todo [0] set via todo_start
ok 53 - 1 failed test (2), todo [Reason] set via $TODO
ok 54 - 1 failed test (2), todo [Reason] set via todo_start
ok 55 - 1 failed test (2), todo [] set via todo_start
ok 56 - 1 failed test (2), todo [0] set via todo_start
ok 57 - 1 failed test (3), todo [Reason] set via $TODO
ok 58 - 1 failed test (3), todo [Reason] set via todo_start
ok 59 - 1 failed test (3), todo [] set via todo_start
ok 60 - 1 failed test (3), todo [0] set via todo_start
ok 61 - 1fail, wrongplan (1), todo [Reason] set via $TODO
ok 62 - 1fail, wrongplan (1), todo [Reason] set via todo_start
ok 63 - 1fail, wrongplan (1), todo [] set via todo_start
ok 64 - 1fail, wrongplan (1), todo [0] set via todo_start
ok 65 - 1fail, wrongplan (2), todo [Reason] set via $TODO
ok 66 - 1fail, wrongplan (2), todo [Reason] set via todo_start
ok 67 - 1fail, wrongplan (2), todo [] set via todo_start
ok 68 - 1fail, wrongplan (2), todo [0] set via todo_start
ok 69 - 1fail, wrongplan (3), todo [Reason] set via $TODO
ok 70 - 1fail, wrongplan (3), todo [Reason] set via todo_start
ok 71 - 1fail, wrongplan (3), todo [] set via todo_start
ok 72 - 1fail, wrongplan (3), todo [0] set via todo_start
ok 73 - 1fail, 1pass (1), todo [Reason] set via $TODO
ok 74 - 1fail, 1pass (1), todo [Reason] set via todo_start
ok 75 - 1fail, 1pass (1), todo [] set via todo_start
ok 76 - 1fail, 1pass (1), todo [0] set via todo_start
ok 77 - 1fail, 1pass (2), todo [Reason] set via $TODO
ok 78 - 1fail, 1pass (2), todo [Reason] set via todo_start
ok 79 - 1fail, 1pass (2), todo [] set via todo_start
ok 80 - 1fail, 1pass (2), todo [0] set via todo_start
ok 81 - 1fail, 1pass (3), todo [Reason] set via $TODO
ok 82 - 1fail, 1pass (3), todo [Reason] set via todo_start
ok 83 - 1fail, 1pass (3), todo [] set via todo_start
ok 84 - 1fail, 1pass (3), todo [0] set via todo_start
ok 85 - todo tests in the subtest (1), todo [Reason] set via $TODO
ok 86 - todo tests in the subtest (1), todo [Reason] set via todo_start
ok 87 - todo tests in the subtest (1), todo [] set via todo_start
ok 88 - todo tests in the subtest (1), todo [0] set via todo_start
ok 89 - todo tests in the subtest (2), todo [Reason] set via $TODO
ok 90 - todo tests in the subtest (2), todo [Reason] set via todo_start
ok 91 - todo tests in the subtest (2), todo [] set via todo_start
ok 92 - todo tests in the subtest (2), todo [0] set via todo_start
ok 93 - todo tests in the subtest (3), todo [Reason] set via $TODO
ok 94 - todo tests in the subtest (3), todo [Reason] set via todo_start
ok 95 - todo tests in the subtest (3), todo [] set via todo_start
ok 96 - todo tests in the subtest (3), todo [0] set via todo_start
ok
t/Legacy/subtest/wstat.t .......................
# Subtest: foo
1..1
ok 1 - bar
ok 1 - foo
ok 2 - exit code keeps on from a subtest
# Subtest: foo2
1..1
ok 1 - bar2
ok 3 - foo2
ok 4 - exit code keeps on from a subtest
1..4
ok
t/Legacy/tbm_doesnt_set_exported_to.t ..........
1..1
ok 1 - using Test::Builder::Module does not set exported_to()
ok
t/Legacy/Test2/Subtest.t .......................
ok 1 - 2 results
ok 2 - An object of class 'Test2::Event::Note' isa 'Test2::Event::Note'
ok 3 - got subtest note
ok 4 - An object of class 'Test2::Event::Subtest' isa 'Test2::Event::Subtest'
ok 5 - subtest passed
ok 6 - got all subevents
ok 7 - An object of class 'Test2::Event::Ok' isa 'Test2::Event::Ok'
ok 8 - subtest ok passed
ok 9 - subtest ok name
ok 10 - An object of class 'Test2::Event::Plan' isa 'Test2::Event::Plan'
ok 11 - subtest plan is 1
1..11
ok
t/Legacy/Tester/tbt_01basic.t ..................
1..10
ok 1 - This is a basic test
ok 2 - captured okay on basic
ok 3 - captured okay again without changing number
ok 4 - test unrelated to Test::Builder::Tester
ok 5 - multiple tests
ok 6 - regexp matching
ok 7 - testing failing
ok 8 - testing failing on the same line with no name
ok 9 - testing failing on the same line with the same name
ok 10 - testing failing with todo
ok
t/Legacy/Tester/tbt_02fhrestore.t ..............
1..4
ok 1 - standard test okay
ok 2 - output file reconnected
ok 3 - todo output file reconnected
ok 4 - failure output file reconnected
ok
t/Legacy/Tester/tbt_03die.t ....................
1..1
ok 1 - dies correctly on error
ok
t/Legacy/Tester/tbt_04line_num.t ...............
1..3
ok 1 - normal line num
ok 2 - line number minus one
ok 3 - line number plus two
ok
t/Legacy/Tester/tbt_05faildiag.t ...............
1..5
ok 1 - test fail
ok 2 - test_fail first
ok 3 - test diag
ok 4 - test diag multi line
ok 5 - test diag multiple
ok
t/Legacy/Tester/tbt_06errormess.t ..............
1..8
ok 1 - STDOUT basic meta meta test
ok 2 - STDERR basic meta meta test
ok 3 - STDOUT basic meta meta test 2
ok 4 - STDERR basic meta meta test 2
ok 5 - STDOUT meta meta test with tbt
ok 6 - STDERR meta meta test with tbt
ok 7 - STDOUT meta meta test with tbt2
ok 8 - STDERR meta meta test with tbt2
ok
t/Legacy/Tester/tbt_07args.t ...................
1..18
ok 1 - STDOUT basic meta meta test
ok 2 - STDERR basic meta meta test
ok 3 - STDOUT basic meta meta test 2
ok 4 - STDERR basic meta meta test 2
ok 5 - STDOUT meta meta test with tbt
ok 6 - STDERR meta meta test with tbt
ok 7 - STDOUT meta meta test with tbt2
ok 8 - STDERR meta meta test with tbt2
ok 9 - STDOUT meta test name
ok 10 - STDERR meta test name
ok 11 - STDOUT meta test title
ok 12 - STDERR meta test title
ok 13 - STDOUT meta test title
ok 14 - STDERR meta test title
ok 15 - STDOUT meta test skip_out
ok 16 - STDERR meta test skip_out
ok 17 - STDOUT meta test skip_err
ok 18 - STDERR meta test skip_err
ok
t/Legacy/Tester/tbt_08subtest.t ................
1..1
# Subtest: foo
1..1
ok 1 - fail works
ok 1 - foo
ok
t/Legacy/Tester/tbt_09do.t .....................
1..3
ok 1 - code is not executing directly
ok 2 - test_fail caught fail message inside a do
ok 3 - do succeeded
ok
t/Legacy/thread_taint.t ........................
1..1
ok 1 - Loading Test::More does not load threads.pm
ok
t/Legacy/threads.t .............................
1..6
ok 1 - Each of these should app the test number
ok 2 - Each of these should app the test number
ok 3 - Each of these should app the test number
ok 4 - Each of these should app the test number
ok 5 - Each of these should app the test number
ok 6 - Should be five
ok
t/Legacy/todo.t ................................
1..36
not ok 1 - Expected failure # TODO Just testing the todo interface.
# Failed (TODO) test 'Expected failure'
# at t/Legacy/todo.t line 21.
not ok 2 - Another expected failure # TODO Just testing the todo interface.
# Failed (TODO) test 'Another expected failure'
# at t/Legacy/todo.t line 22.
ok 3 - This is not todo
ok 4 - TB->todo
not ok 5 - Yet another failure # TODO Just testing the todo interface.
# Failed (TODO) test 'Yet another failure'
# at t/Legacy/todo.t line 34.
ok 6 - This is still not todo
not ok 7 - ok # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'ok'
# at t/Legacy/todo.t line 43.
not ok 8 - like # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'like'
# at t/Legacy/todo.t line 45.
# 'this'
# doesn't match '(?^:that)'
not ok 9 - is # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'is'
# at t/Legacy/todo.t line 46.
# got: 'this'
# expected: 'that'
not ok 10 - isnt # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'isnt'
# at t/Legacy/todo.t line 47.
# got: 'this'
# expected: anything else
not ok 11 - Fooble->can('yarble') # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'Fooble->can('yarble')'
# at t/Legacy/todo.t line 49.
# Fooble->can('yarble') failed
not ok 12 - The class (or class-like) 'Fooble' isa 'yarble' # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'The class (or class-like) 'Fooble' isa 'yarble''
# at t/Legacy/todo.t line 50.
# The class (or class-like) 'Fooble' isn't a 'yarble'
not ok 13 - use Fooble; # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'use Fooble;'
# at t/Legacy/todo.t line 51.
# Tried to use 'Fooble'.
# Error: Can't locate Fooble.pm in @INC (you may need to install the Fooble module) (@INC contains: /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib /data/fly2000/cpanfly-5.20/var/megalib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib /data/fly2000/cpanfly-5.20/var/megalib /home/fly2000/ap2000-298540/site/lib /home/fly2000/ap2000-298540/lib .) at t/Legacy/todo.t line 51.
# BEGIN failed--compilation aborted at t/Legacy/todo.t line 51.
not ok 14 - require Fooble; # TODO testing that error messages don't leak out of todo
# Failed (TODO) test 'require Fooble;'
# at t/Legacy/todo.t line 52.
# Tried to require 'Fooble'.
# Error: Can't locate Fooble.pm in @INC (you may need to install the Fooble module) (@INC contains: /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib /data/fly2000/cpanfly-5.20/var/megalib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib /data/fly2000/cpanfly-5.20/var/megalib /home/fly2000/ap2000-298540/site/lib /home/fly2000/ap2000-298540/lib .) at (eval 10) line 2.
not ok 15 # TODO & SKIP Just testing todo_skip
not ok 16 # TODO & SKIP Just testing todo_skip
not ok 17 # TODO & SKIP Just testing todo_skip
ok 18 - todo_skip without $how_many warning
not ok 19 - Just testing todo # TODO testing $TODO with an incorrect exported_to()
# Failed (TODO) test 'Just testing todo'
# at t/Legacy/todo.t line 89.
not ok 20 - Testing todo_start() # TODO Expected failures
# Failed (TODO) test 'Testing todo_start()'
# at t/Legacy/todo.t line 95.
not ok 21 - Testing todo_start() with more than one failure # TODO Expected failures
# Failed (TODO) test 'Testing todo_start() with more than one failure'
# at t/Legacy/todo.t line 96.
ok 22 - todo_start should have the correct TODO message
ok 23 - todo_end() should not leak TODO behavior
not ok 24 - fail 1 # TODO Nesting TODO
# Failed (TODO) test 'fail 1'
# at t/Legacy/todo.t line 107.
not ok 25 - fail 2 # TODO failure level 1
# Failed (TODO) test 'fail 2'
# at t/Legacy/todo.t line 110.
not ok 26 - fail 3 # TODO failure_level 2
# Failed (TODO) test 'fail 3'
# at t/Legacy/todo.t line 114.
not ok 27 - fail 4 # TODO failure level 1
# Failed (TODO) test 'fail 4'
# at t/Legacy/todo.t line 118.
not ok 28 - fail 4 # TODO Nesting TODO
# Failed (TODO) test 'fail 4'
# at t/Legacy/todo.t line 123.
ok 29 - Nested TODO message should be correct
ok 30 - ... and original TODO message should be correct
not ok 31 - testing todo_start() with no message # TODO
# Failed (TODO) test 'testing todo_start() with no message'
# at t/Legacy/todo.t line 132.
ok 32 - todo() reports no reason
ok 33 - but we're in_todo()
ok 34
ok 35
ok 36 - $TODO = "" is not considered TODO
ok
t/Legacy/undef.t ...............................
1..21
ok 1 - undef is undef
ok 2 - no warnings
ok 3 - undef isnt foo
ok 4 - no warnings
ok 5 - undef isnt an empty string
ok 6 - undef isnt zero
ok 7 - is_num()
ok 8 - isnt_num()
ok 9 - undef is like anything
ok 10 - no warnings
ok 11 - no warnings
ok 12 - no warnings
ok 13 - no warnings
ok 14 - no warnings
ok 15 - undef <= 2
ok 16
ok 17
ok 18 - no warnings
ok 19 - no warnings
ok 20
ok 21 - no warnings
ok
t/Legacy/use_ok.t ..............................
# Basic use_ok
ok 1 - use Symbol;
ok 2 - use_ok() no args exports defaults
# With one arg
ok 3 - use Symbol;
ok 4 - one arg, defaults overridden
ok 5 - right function exported
# Multiple args
ok 6 - use Symbol;
ok 7 - multiple args
# Defining constants
ok 8 - use constant;
ok 9 - constant
ok 10 - no warning
# use Module VERSION
ok 11 - use Symbol;
# use Module VERSION does not call import
ok 12 - use NoExporter;
ok 13 - use Test::More;
# Signals are preserved
ok 14 - use SigDie;
ok 15 - SIG{__DIE__} preserved
# Line numbers preserved
ok 16 - use that_cares_about_line_numbers;
ok 17 - caller package preserved
ok 18 - file
ok 19 - line
# not confused by functions vs class names
ok 20 - use ok;
ok 21 - use Foo::bar;
1..21
ok
t/Legacy/useing.t ..............................
1..5
ok 1 - require Test::Builder;
ok 2 - require Test::More;
ok 3 - require Test::Simple;
ok 4 - Foo->can(...)
ok 5 - import working properly
ok
t/Legacy/utf8.t ................................
1..5
ok 1 - layers copied to failure_output
ok 2 - layers copied to todo_output
ok 3 - layers copied to output
ok 4 - Testing Äž
ok 5
ok
t/Legacy/versions.t ............................
ok 1
ok 2 - Test::Simple
ok 3 - Test::Builder
ok 4 - Test::Builder::Module
1..4
ok
t/Legacy_And_Test2/builder_loaded_late.t .......
1..4
ok 1 - got 3 warnings
ok 2 - Warn about late Test::Builder load
ok 3 - Got the formatter warning
ok 4 - Formatter does not support no_header
ok
t/regression/642_persistent_end.t ..............
ok 1 - Not the end
ok 2 - the end
ok 3 - Not the end
1..3
ok
t/regression/no_name_in_subtest.t ..............
ok 1 -
ok 2 - foo {
ok 1 - name
ok 2 -
1..2
}
1..2
ok
t/Test2/acceptance/try_it_done_testing.t .......
ok 1 - First
ok 2 - Second
1..2
ok
t/Test2/acceptance/try_it_fork.t ...............
1..6
ok 1 - test 1 in pid 29461
ok 2 - test 2 in pid 29461
ok 3 - test 1 in pid 29462
ok 4 - test 2 in pid 29462
ok 5 - test 1 in pid 29463
ok 6 - test 2 in pid 29463
# IPC is waiting for children to finish...
ok
t/Test2/acceptance/try_it_no_plan.t ............
ok 1 - First
ok 2 - Second
1..2
ok
t/Test2/acceptance/try_it_plan.t ...............
1..2
ok 1 - First
ok 2 - Second
ok
t/Test2/acceptance/try_it_skip.t ............... skipped: testing skip all
t/Test2/acceptance/try_it_threads.t ............
1..6
ok 1 - test 1 in thread 1
ok 2 - test 2 in thread 1
ok 3 - test 1 in thread 2
ok 4 - test 2 in thread 2
ok 5 - test 1 in thread 3
ok 6 - test 2 in thread 3
# IPC is waiting for children to finish...
ok
# should be a diag
t/Test2/acceptance/try_it_todo.t ...............
ok 1 - First
not ok 2 - Second # TODO here be dragons
# Failed test 'Second'
# at t/Test2/acceptance/try_it_todo.t line 44.
# should be a note
ok 3 - Third
1..3
ok
t/Test2/behavior/err_var.t .....................
ok 1 - set $!
ok 2 - preserved $!
1..2
ok
t/Test2/behavior/init_croak.t ..................
ok 1 - Croak does not report to HashBase from init
1..1
ok
t/Test2/behavior/nested_context_exception.t ....
# dies
ok 1 - no warnings
# bad store
ok 2 - random event
ok 3 - got warnings
ok 4 - got expected warning
# bad simple
ok 5 - got warnings
ok 6 - got expected warning
# outer
# dies
ok 7 - random event
ok 8 - no warnings
# outer
# bad store
ok 9 - got warnings
ok 10 - got expected warning
# outer
# bad simple
ok 11 - got warnings
ok 12 - got expected warning
1..12
ok
t/Test2/behavior/no_load_api.t .................
ok 1 - Test2::API was not loaded
1..1
ok
t/Test2/behavior/Subtest_buffer_formatter.t ....
ok 1 - Unbuffered with no parent formatter has no formatter
ok 2 - Unbuffered where parent has 'show' formatter has formatter
ok 3 - Unbuffered where parent has 'hide' formatter has formatter
ok 4 - Buffered with no parent formatter has no formatter
ok 5 - Buffered where parent has 'show' formatter has formatter
ok 6 - Buffered where parent has 'hide' formatter has no formatter
1..6
ok
t/Test2/behavior/Subtest_events.t ..............
ok 1 - main event is not inside a subtest
ok 2 - Got subtest id
ok 3 - nested events are in the subtest
1..3
ok
t/Test2/behavior/Taint.t .......................
ok 1
ok 2
1..2
ok
t/Test2/legacy/TAP.t ...........................
ok 1 - STDOUT is empty for diag
ok 2 - STDERR for diag looks right
ok 3 - STDERR for note is empty
ok 4 - STDOUT looks right for note
ok 5 - STDERR for ok is empty
ok 6 - STDOUT looks right for ok
1..6
ok
t/Test2/modules/API.t ..........................
ok 1 - context_do method is present
ok 2 - no_context method is present
ok 3 - test2_init_done method is present
ok 4 - test2_load_done method is present
ok 5 - test2_pid method is present
ok 6 - test2_tid method is present
ok 7 - test2_stack method is present
ok 8 - test2_no_wait method is present
ok 9 - test2_add_callback_context_init method is present
ok 10 - test2_add_callback_context_release method is present
ok 11 - test2_add_callback_exit method is present
ok 12 - test2_add_callback_post_load method is present
ok 13 - test2_list_context_init_callbacks method is present
ok 14 - test2_list_context_release_callbacks method is present
ok 15 - test2_list_exit_callbacks method is present
ok 16 - test2_list_post_load_callbacks method is present
ok 17 - test2_ipc method is present
ok 18 - test2_ipc_drivers method is present
ok 19 - test2_ipc_add_driver method is present
ok 20 - test2_ipc_polling method is present
ok 21 - test2_ipc_disable_polling method is present
ok 22 - test2_ipc_enable_polling method is present
ok 23 - test2_formatter method is present
ok 24 - test2_formatters method is present
ok 25 - test2_formatter_add method is present
ok 26 - test2_formatter_set method is present
ok 27 - Was not load_done right away
ok 28 - Init was not done right away
ok 29 - We loaded it
ok 30 - init is done.
ok 31 - Test2 is finished loading
ok 32 - got pid
ok 33 - got tid
ok 34 - got stack
ok 35 - always get the same stack
ok 36 - got ipc
ok 37 - always get the same IPC
ok 38 - Got driver list
ok 39 - got warning about adding driver too late
ok 40 - Got updated list
ok 41 - Polling is on
ok 42 - Polling is off
ok 43 - Polling is on
ok 44 - Got a formatter
ok 45 - always get the same Formatter (class name)
ok 46 - ran the post-load
ok 47 - formatter_set requires an argument
ok 48 - formatter_set doesn't work after initialization
ok 49 - no_wait is not set
ok 50 - no_wait is set
ok 51 - no_wait is not set
ok 52 - void context test
ok 53 - void context
ok 54 - scalar context test
ok 55 - scalar context
ok 56 - got scalar return
ok 57 - array context test
ok 58 - array context
ok 59 - Got array return
ok 60 - got exception
ok 61 - got the same context before calling no_context
ok 62 - Got a different context inside of no_context()
ok 63 - got the same context before calling no_context
ok 64 - Got a different context inside of no_context({}, hid)
ok 65 - got the same context before calling no_context
ok 66 - Got a different context inside of no_context({}, hid)
ok 67 - 1 warning
ok 68 - Got warning about unreleased context
ok 69 - got the one instance of the hook
ok 70 - got the one instance of the hook
ok 71 - got the one instance of the hook
ok 72 - got the one instance of the hook
ok 73 - got the one instance of the hook
ok 74 - got the two instances of the hook
ok 75 - got the two instances of the hook
ok 76 - got the two instances of the hook
ok 77 - got the two instances of the hook
ok 78 - got the two instances of the hook
1..78
# Running set_exit
# Running END hook
ok
t/Test2/modules/API/Breakage.t .................
ok 1 - Got even list (upgrade_suggested)
ok 2 - No undefined items (upgrade_suggested)
ok 3 - Got even list (upgrade_required)
ok 4 - No undefined items (upgrade_required)
ok 5 - Got even list (known_broken)
ok 6 - No undefined items (known_broken)
ok 7 - Nothing to report
ok 8 - Still nothing to report
ok 9 - Got expected report items
ok 10 - Nothing to report
ok 11 - Did not try to load anything
ok 12 - Nothing to report
ok 13 - Tried to load modules
1..13
ok
t/Test2/modules/API/Context.t ..................
ok 1 - Got the exception
ok 2 - got hub
ok 3 - Found place to report errors
ok 4 - Got a new context
ok 5 - Additional call to context gets spawn
ok 6 - Found place to report errors
ok 7 - snapshot is identical except for canon/spawn/aborted
ok 8 - snapshot is a new instance
ok 9 - context is ok in an end block
ok 10 - Pass
ok 11 - got name
ok 12 - Got the trace info
ok 13 - No events yet
ok 14 - Pass
ok 15 - got name
ok 16 - Got the trace info
ok 17 - 1 event
ok 18 - Hub saw the event
ok 19 - Pass
ok 20 - got name
ok 21 - Got the trace info
ok 22 - 1 event
ok 23 - Hub saw the event
ok 24 - got message
ok 25 - Got the trace info
ok 26 - 1 event
ok 27 - Hub saw the event
ok 28 - got message
ok 29 - Got the trace info
ok 30 - 1 event
ok 31 - Hub saw the event
ok 32 - got max
ok 33 - Got the trace info
ok 34 - 1 event
ok 35 - Hub saw the event
ok 36 - got name
ok 37 - got reason
ok 38 - skip events pass by default
ok 39 - Got the trace info
ok 40 - 1 event
ok 41 - Hub saw the event
ok 42 - can override skip params
ok 43 - Got all hook in correct order
ok 44 - default depth
ok 45 - got args
ok 46 - Old context restored
ok 47 - do_in_context works without an original
ok 48 - need to have trace
ok 49 - need to have hub
ok 50 - depth set to 0 when not defined.
ok 51 - Do not reset depth
ok 52 - Non canonical context, do not release
ok 53 - Level sanity
ok 54 - Was able to get context when fudging level
ok 55 - 1 warning
ok 56 - Got expected warning
ok 57 - got exception
ok 58 - got warning
ok 59 - Got the Ok event class
ok 60 - Got the +Ok event class
ok 61 - Bad event type
ok 62 - returned ok event
ok 63 - returned ok event
ok 64 - got ok event 1
ok 65 - got ok event 2
ok 66 - event 1 diag 2
ok 67 - saved errno
ok 68 - saved eval error
ok 69 - saved child exit
ok 70 - altered $! in tool
ok 71 - altered $@ in tool
ok 72 - altered $? in tool
ok 73 - altered $! in tool (nested)
ok 74 - altered $@ in tool (nested)
ok 75 - altered $? in tool (nested)
ok 76 - restored the nested $! in tool
ok 77 - restored the nested $@ in tool
ok 78 - restored the nested $? in tool
ok 79 - altered $! in tool (nested)
ok 80 - altered $@ in tool (nested)
ok 81 - altered $? in tool (nested)
ok 82 - Destroy does not reset $!
ok 83 - Destroy does not reset $@
ok 84 - Destroy does not reset $?
ok 85 - restored errno
ok 86 - restored eval error
ok 87 - restored child exit
ok 88 - saved errno
ok 89 - saved eval error
ok 90 - saved child exit
ok 91 - altered $! in tool
ok 92 - altered $@ in tool
ok 93 - altered $? in tool
ok 94 - Destroy does not restore $!
ok 95 - Destroy does not restore $@
ok 96 - Destroy does not restore $?
1..96
ok
t/Test2/modules/API/Instance.t .................
ok 1 - Got initial settings
ok 2 - wiped object
ok 3 - Reset Object
ok 4 - no formatter set
ok 5 - formatter set
ok 6 - did not run yet
ok 7 - stored callback for later
ok 8 - not loaded
ok 9 - loaded
ok 10 - ran the callback
ok 11 - Did not run the callback again
ok 12 - ran the new callback
ok 13 - stored callback for the record
ok 14 - Post-load callbacks must be coderefs
ok 15 - got ipc
ok 16 - calling ipc finalized the object
ok 17 - got stack
ok 18 - calling stack did not finaliz the object
ok 19 - Got formatter
ok 20 - calling format finalized the object
ok 21 - got specified formatter
ok 22 - calling format finalized the object
ok 23 - got specified formatter
ok 24 - calling format finalized the object
ok 25 - got specified formatter
ok 26 - calling format finalized the object
ok 27 - Bad formatter
ok 28 - added an exit callback
ok 29 - added another exit callback
ok 30 - Exit callbacks must be coderefs
ok 31 - No errors
ok 32 - Process exited badly
ok 33 - Warn about exit
ok 34 - No errors
ok 35 - Thread exited badly
ok 36 - Warn about exit
ok 37 - no errors on exit
ok 38 - no errors on exit
ok 39 - no errors on exit
ok 40 - no errors on exit
ok 41 - number of failures
ok 42 - set exit code to a sane number
ok 43 - errors on exit
ok 44 - got diag
ok 45 - Got warning about version mismatch
ok 46 - Reported bad modules
ok 47 - Have IPC
ok 48 - Have IPC
ok 49 - no IPC
ok 50 - errors on exit
ok 51 - got diag
# IPC is waiting for children to finish...
# IPC is waiting for children to finish...
ok 52 - errors on exit
# IPC is waiting for children to finish...
# IPC is waiting for children to finish...
# IPC is waiting for children to finish...
ok 53 - kept original exit
# IPC is waiting for children to finish...
# IPC is waiting for children to finish...
ok 54 - set exit code to a sane number
ok 55 - Warned about unfreed context
ok 56 - Sanity Check
ok 57 - IPC not loaded, no IPC object
ok 58 - calling ipc finalized the object
ok 59 - no polling defined
ok 60 - no driver
ok 61 - IPC loaded if threads are
ok 62 - calling ipc finalized the object
ok 63 - polling on by default
ok 64 - default driver
ok 65 - IPC loaded if Test2::IPC is
ok 66 - calling ipc finalized the object
ok 67 - polling on by default
ok 68 - default driver
ok 69 - IPC loaded if drivers have been added
ok 70 - calling ipc finalized the object
ok 71 - polling on by default
ok 72 - Got warning at correct frame
ok 73 - Failed without viable IPC driver
ok 74 - no callbacks
ok 75 - no polling, undef
ok 76 - no callbacks
ok 77 - no polling, still undef
ok 78 - added the callback
ok 79 - polling on
ok 80 - called cull once
ok 81 - kept the callback
ok 82 - no polling, set to 0
ok 83 - did not call cull
ok 84 - did not add the callback
ok 85 - polling on
ok 86 - called cull once
1..86
ok
t/Test2/modules/API/Stack.t ....................
ok 1 - Create a stack
ok 2 - Empty stack
ok 3 - Nothing to peek at
ok 4 - cull lives when stack is empty
ok 5 - all lives when stack is empty
ok 6 - clear lives when stack is empty
ok 7 - No hub to pop
ok 8 - pushed a hub
ok 9 - Root hub cannot be popped
ok 10 - Must specify correct hub to pop
ok 11 - Got all hubs
ok 12 - Popped the correct hub
ok 13 - Got all hubs
ok 14 - got the hub
ok 15 - got the hub
ok 16 - no hubs
ok 17 - Generated a top hub
ok 18 - Used sync's ipc
ok 19 - Got formatter
ok 20 - do not generate a new top if there is already a top
ok 21 - Add a new hub
ok 22 - new one is on top
ok 23 - inherited ipc
ok 24 - inherited formatter
ok 25 - built with no ipc
ok 26 - built with no formatter
1..26
ok
t/Test2/modules/Event.t ........................
ok 1 - Added foo accessor
ok 2 - Added bar accessor
ok 3 - Added baz accessor
ok 4 - Events do not cause failures by default
ok 5 - increments_count is false by default
ok 6 - terminate is false by default
ok 7 - global is false by default
ok 8 - no meta-data associated for key 'xxx'
ok 9 - got meta-data
ok 10 - did not use default
ok 11 - got the default
ok 12 - last call set the value to the default for future use
ok 13 - Default summary is event package
ok 14 - Not diagnostics by default
ok 15 - no subtest_id by default
1..15
ok
t/Test2/modules/Event/Bail.t ...................
ok 1 - bailout always causes fail.
ok 2 - Bail will cause the test to exit.
ok 3 - Bail is global, everything should bail
ok 4 - passing
ok 5 - no failures
ok 6 - set bailed out
ok 7 - Summary includes reason
ok 8 - Summary has no reason
ok 9 - Bail events are counted as diagnostics
1..9
ok
t/Test2/modules/Event/Diag.t ...................
ok 1 - summary is just message
ok 2 - set undef message to undef
ok 3 - summary is just message even when undef
ok 4 - stringified the input value
ok 5 - Diag events are counted as diagnostics
1..5
ok
t/Test2/modules/Event/Exception.t ..............
ok 1 - Exception events always cause failure
ok 2 - Got summary
ok 3 - Exception events are counted as diagnostics
1..3
ok
t/Test2/modules/Event/Note.t ...................
ok 1 - summary is just message
ok 2 - set undef message to undef
ok 3 - summary is just message even when undef
ok 4 - stringified the input value
1..4
ok
t/Test2/modules/Event/Ok.t .....................
ok 1 - Passing {
ok 1 - Bumps the count
ok 2 - Passing 'OK' event does not cause failure
ok 3 - got pass
ok 4 - got name
ok 5 - effective pass
ok 6 - Summary is just the name of the test
ok 7 - Nameless test
1..7
}
ok 2 - Failing {
ok 1 - Bumps the count
ok 2 - A failing test causes failures
ok 3 - got pass
ok 4 - got name
ok 5 - effective pass
ok 6 - Summary is just the name of the test
1..6
}
ok 3 - Failing TODO {
ok 1 - Bumps the count
ok 2 - got pass
ok 3 - got name
ok 4 - effective pass is true from todo
ok 5 - Summary is just the name of the test + todo
ok 6 - empty string todo is still a todo
ok 7 - Summary is just the name of the test + todo
1..7
}
ok 4 - init {
ok 1 - Some characters do not belong in a name
ok 2 - Some characters do not belong in a name
ok 3 - set effective pass
1..3
}
1..4
ok
t/Test2/modules/Event/Plan.t ...................
ok 1 - simple summary
ok 2 - Got plan details
ok 3 - regular plan is not a global event
ok 4 - set plan in state
ok 5 - No terminate for normal plan
ok 6 - set plan in state
ok 7 - Terminate 0 on skip_all
ok 8 - skip summary
ok 9 - Got skip details
ok 10 - NO PLAN summary
ok 11 - Got 'NO PLAN' details
ok 12 - set plan in state
ok 13 - No terminate for no_plan
ok 14 - Update plan in state if it is 'NO PLAN'
ok 15 - Change skip_all to SKIP
ok 16 - Change no_plan to 'NO PLAN'
ok 17 - NO PLAN is not global
ok 18 - Invalid Directive
ok 19 - Reason without directive
ok 20 - Nothing to do
ok 21 - Max must be an integer
1..21
ok
t/Test2/modules/Event/Skip.t ...................
ok 1 - set name
ok 2 - got skip reason
ok 3 - no default for pass
ok 4 - TODO always effectively passes
ok 5 - summary with reason
ok 6 - summary without reason
1..6
ok
t/Test2/modules/Event/Subtest.t ................
ok 1 - Inherit from Ok
ok 2 - subevents is an arrayref
ok 3 - simple summary
ok 4 - simple summary + TODO
ok 5 - simple summary + TODO + Reason
ok 6 - unnamed summary
1..6
ok
t/Test2/modules/Event/Waiting.t ................
ok 1 - Created event
ok 2 - waiting is global
ok 3 - Got summary
1..3
ok
t/Test2/modules/Formatter/TAP.t ................
ok 1 - Created a new instance
ok 2 - Got 2 handles
ok 3 - First and second handles are not the same
ok 4 - Not utf8 by default
ok 5 - Got encoding
ok 6 - Got 2 handles
ok 7 - Now utf8
ok 8 - Got 2 handles
ok 9 - Now utf8
ok 10 - Got expected TAP output to std
ok 11 - Got expected TAP output to err
ok 12 - bail {
ok 1 - Got tap
1..1
}
ok 13 - diag {
ok 1 - Got tap
ok 2 - Only 1 newline
ok 3 - All lines have proper prefix
1..3
}
ok 14 - exception {
ok 1 - Got tap
1..1
}
ok 15 - note {
ok 1 - Got tap
ok 2 - Only 1 newline
ok 3 - All lines have proper prefix
1..3
}
ok 16 - name_and_number {
ok 1 - Got expected output
1..1
}
ok 17 - no_number {
ok 1 - Got expected output
1..1
}
ok 18 - no_name {
ok 1 - Got expected output
1..1
}
ok 19 - todo {
ok 1 - Got expected output
ok 2 - Got expected output
1..2
}
ok 20 - name_and_number {
ok 1 - Got expected output
1..1
}
ok 21 - no_number {
ok 1 - Got expected output
1..1
}
ok 22 - no_name {
ok 1 - Got expected output
1..1
}
ok 23 - todo {
ok 1 - Got expected output
ok 2 - Got expected output
1..2
}
ok 24 - plan {
ok 1 - Got tap
ok 2 - Got tap for skip_all
ok 3 - SKIP without reason
ok 4 - NO PLAN
ok 5 - Multi-line reason for skip
1..5
}
ok 25 - subtest {
ok 1 - Got Buffered TAP output
ok 2 - Got Unbuffered TAP output
ok 3 - Got Buffered TAP output (non-verbose)
ok 4 - Got Buffered TAP output (verbose)
ok 5 - Got Unbuffered TAP output (non-verbose)
ok 6 - Got Unbuffered TAP output (verbose)
1..6
}
ok 26 - skip {
ok 1 - Passing Skip
ok 2 - Failling Skip
ok 3 - Todo Skip
1..3
}
1..26
ok
t/Test2/modules/Hub.t ..........................
ok 1 - basic {
ok 1 - Created event
ok 2 - Created event
ok 3 - Created event
ok 4 - old formatter
ok 5 - Formatter got all events
1..5
}
ok 2 - follow_ups {
ok 1 - follow_up takes a coderef
ok 2 - Got trace
ok 3 - Got hub
ok 4 - Hub state has not ended yet
ok 5 - ran once
ok 6 - Ended at the expected place.
ok 7 - ran once
1..7
}
ok 3 - IPC {
ok 1 - Default Driver
ok 2 - waited properly
ok 3 - child exited with success
ok 4 - old formatter
ok 5 - Formatter got all events (Fork)
ok 6 - old formatter
ok 7 - Formatter got all events (Threads)
ok 8 - old formatter
ok 9 - Formatter got all events (no IPC)
1..9
}
ok 4 - listen {
ok 1 - got hub
ok 2 - got hub
ok 3 - Got counts
ok 4 - got events
ok 5 - got all events in listener that was not removed
ok 6 - listen takes a coderef
1..6
}
ok 5 - metadata {
ok 1 - Set Meta
ok 2 - Same Meta
ok 3 - No Meta
ok 4 - Vivified meta and set it
ok 5 - Cannot use undef as a meta key
ok 6 - Cannot use 0 as a meta key
ok 7 - Cannot use undef as a meta key
ok 8 - Cannot use 0 as a meta key
1..8
}
ok 6 - filter {
ok 1 - got hub
ok 2 - got hub
ok 3 - got events
ok 4 - got all events, even after other filter was removed
ok 5 - Blocked events
ok 6 - filter takes a coderef
1..6
}
ok 7 - pre_filter {
ok 1 - got hub
ok 2 - got hub
ok 3 - got events
ok 4 - got all events, even after other pre_filter was removed
ok 5 - Blocked events
ok 6 - pre_filter takes a coderef
1..6
}
ok 8 - state {
ok 1 - count starts at 0
ok 2 - failed starts at 0
ok 3 - start off passing
ok 4 - no plan yet
ok 5 - Can Fail
ok 6 - Passes again
ok 7 - Added a passing result
ok 8 - still no fails
ok 9 - Still passing
ok 10 - Added a result
ok 11 - new failure
ok 12 - Not passing
ok 13 - is_passing always false after a failure
ok 14 - Passes again
ok 15 - No new result
ok 16 - new failure
ok 17 - Not passing
ok 18 - Could not set plan to 'foo'
ok 19 - Got expected error
ok 20 - Can set plan to integer
ok 21 - Set the plan to an integer
ok 22 - Can set plan to 'NO PLAN'
ok 23 - Set the plan to 'NO PLAN'
ok 24 - Can set plan to 'SKIP'
ok 25 - Set the plan to 'SKIP'
ok 26 - Cannot change plan
ok 27 - Got error
ok 28 - died
ok 29 - Got expected error
ok 30 - not passing
ok 31 - no plan
ok 32 - count reset to 0
ok 33 - reset failures
ok 34 - not ended
ok 35 - did not bail out
ok 36 - no skip reason
1..36
}
1..8
ok
t/Test2/modules/Hub/Interceptor.t ..............
ok 1 - inheritence
ok 2 - exception type
ok 3 - Scalar reference value
1..3
ok
t/Test2/modules/Hub/Interceptor/Terminator.t ...
ok 1 - loaded
1..1
ok
t/Test2/modules/Hub/Subtest.t ..................
ok 1 - inheritence
ok 2 - processed
ok 3 - ran the mocked process
ok 4 - got our event
ok 5 - nested was set
ok 6 - did not bail
ok 7 - processed
ok 8 - ran the mocked process
ok 9 - got our event
ok 10 - nested was set
ok 11 - bailed
ok 12 - did not get past the terminate
ok 13 - did not get past the terminate
ok 14 - did not automatically abort
ok 15 - did not automatically abort
1..15
ok
t/Test2/modules/IPC.t ..........................
ok 1 - Default driver
ok 2 - Imported cull
1..2
ok
t/Test2/modules/IPC/Driver.t ...................
ok 1 - Driver not added multiple times
ok 2 - Require override of method send
ok 3 - Require override of method cull
ok 4 - Require override of method add_hub
ok 5 - Require override of method drop_hub
ok 6 - Require override of method waiting
ok 7 - Require override of method is_viable
ok 8 - abort {
ok 1 - Got error
ok 2 - got 'not ok' on stdout
ok 3 - got 'not ok' on stdout
ok 4 - Got error
1..4
}
1..8
ok
t/Test2/modules/IPC/Driver/Files.t .............
ok 1 - Created an IPC instance
ok 2 - Correct type
ok 3 - inheritence
ok 4 - created temp dir
ok 5 - stored pid
ok 6 - stored the tid
ok 7 - wrote hub file
ok 8 - opened hub file
ok 9 - Wrote pid and tid to hub file
ok 10 - 2 files added to the IPC directory
ok 11 - Culled both events
ok 12 - All files collected
ok 13 - removed hub file
ok 14 - did not get our own global event
ok 15 - still have temp dir
ok 16 - cleaned up temp dir
ok 17 - Directory not removed (different thread)
ok 18 - Directory not removed (different proc)
ok 19 - Directory not removed (no thread)
ok 20 - Directory not removed (no proc)
ok 21 - Directory removed
ok 22 - printed
ok 23 - Got temp dir path
ok 24 - Notice about not closing tempdir
ok 25 - Got message for duplicate hub
ok 26 - Cannot remove hub twice
ok 27 - Got fatal error
ok 28 - Explanation
ok 29 - Got dest
ok 30 - Got pid
ok 31 - Got cause
ok 32 - Cannot send to missing hub
ok 33 - Leftover files
ok 34 - What file
ok 35 - Cannot send unblessed objects
ok 36 - Cannot send non-event objects
ok 37 - Events must actually be events (must be blessed)
ok 38 - Events must actually be events (not a real module)
ok 39 - Events must actually be events (not an event type)
ok 40 - no problem
ok 41 - no problem
ok 42 - Got global event
ok 43 - Did not grab it again
ok 44 - Still there
1..44
ok
t/Test2/modules/Util.t .........................
ok 1 - cought exception
ok 2 - expected exception
ok 3 - Success
ok 4 - no error
ok 5 - cought exception
ok 6 - expected exception
ok 7 - Success
ok 8 - no error
ok 9 - cought exception
ok 10 - expected exception
ok 11 - Success
ok 12 - no error
ok 13 - Converted package to file
1..13
ok
t/Test2/modules/Util/ExternalMeta.t ............
ok 1 - Imported 'meta'
ok 2 - Imported 'get_meta'
ok 3 - Imported 'set_meta'
ok 4 - Imported 'delete_meta'
ok 5 - Got instance
ok 6 - nothing fishy.. yet
ok 7 - no meta-data for foo
ok 8 - no meta-data for bar
ok 9 - no meta-data for baz
ok 10 - no meta-data for foo
ok 11 - no meta-data for bar
ok 12 - no meta-data for baz
ok 13 - Still have not modified instance
ok 14 - did not change attribute
ok 15 - get meta-data for foo
ok 16 - get meta-data for foo again
ok 17 - did not change attribute
ok 18 - did not alter already set meta-attribute
ok 19 - still did not alter already set meta-attribute
ok 20 - used default for bar
ok 21 - did not change attribute
ok 22 - Stored meta-data
ok 23 - got old value on delete
ok 24 - no more value
ok 25 - Deleted the meta key
1..25
ok
t/Test2/modules/Util/HashBase.t ................
ok 1 - FOO CONSTANT
ok 2 - BAR CONSTANT
ok 3 - BAZ CONSTANT
ok 4 - FOO CONSTANT
ok 5 - BAR CONSTANT
ok 6 - BAZ CONSTANT
ok 7 - APPLE CONSTANT
ok 8 - PEAR CONSTANT
ok 9 - Accessor
ok 10 - Accessor
ok 11 - Accessor
ok 12 - Accessor set
ok 13 - hash
ok 14 - worked as expected
ok 15 - overrode const sub
ok 16 - worked as expected, const was constant
ok 17 - parent attribute sub not overridden
ok 18 - Did not override existing 'new' method
1..18
ok
t/Test2/modules/Util/Trace.t ...................
ok 1 - got error
ok 2 - Got frame
ok 3 - Got call
ok 4 - Got package
ok 5 - Got file
ok 6 - Got line
ok 7 - got subname
ok 8 - got trace
ok 9 - got detail for trace
ok 10 - got exception
ok 11 - alter() warns
ok 12 - identical
ok 13 - Not the same instance
1..13
ok
t/Test2/regression/gh_16.t .....................
1..1
xxx at (eval 5) line 1.
ok 1 - Did not segv
ok
t/Test2/regression/ipc_files_abort_exit.t ......
1..3
ok 1 - Exit code was not masked
ok 2 - Did not hit the safety exit
ok 3 - Test in forked process
# IPC is waiting for children to finish...
ok
# Testing Diag
t/tools.t ......................................
ok 1 - imported 'ok()'
ok 2 - imported 'is()'
ok 3 - imported 'isnt()'
ok 4 - imported 'like()'
ok 5 - imported 'unlike()'
ok 6 - imported 'diag()'
ok 7 - imported 'note()'
ok 8 - imported 'is_deeply()'
ok 9 - imported 'warnings()'
ok 10 - imported 'exception()'
ok 11 - imported 'plan()'
ok 12 - imported 'skip_all()'
ok 13 - imported 'done_testing()'
ok 14 - 'ok' Test
ok 15 - 'is' test
ok 16 - 'is' undef test
ok 17 - 'isnt' test
ok 18 - 'isnt' undef test 1
ok 19 - 'isnt' undef test 2
ok 20 - 'like' test
ok 21 - 'unlike' test
# Testing Note
ok 22 - 'is_deeply' test
ok 23 - Got warnings
ok 24 - no warnings
ok 25 - got exception
ok 26 - no exception
ok 27 - got plan
ok 28 - planned for 8 oks
ok 29 - got 'ok' result
ok 30 - 'ok' test failed
ok 31 - got 'is' result
ok 32 - 'is' test failed
ok 33 - got 'isnt' result
ok 34 - 'isnt' test failed
ok 35 - got 'like' result
ok 36 - 'like' test failed
ok 37 - got 'unlike' result
ok 38 - 'unlike' test failed
ok 39 - got 'is_deeply' result
ok 40 - 'is_deeply' test failed
ok 41 - got 'diag' result
ok 42 - got diag message
ok 43 - got 'note' result
ok 44 - got note message
ok 45 - 1 event
ok 46 - got plan
ok 47 - plan is skip
ok 48 - skip reason
ok 49 - 5 events
ok 50 - undef test - should not pass
ok 51 - undef test - should not pass
ok 52 - undef test - should not pass
ok 53 - undef test - should not pass
ok 54 - undef test - should not pass
ok 55 - Passed in some useful params
ok 56 - Different context inside intercept
ok 57 - got 3 events
ok 58 - got 1 event
ok 59 - got the bail
ok 60 - Exception was propogated
ok 61 - 2 events
ok 62 - got ok
ok 63 - finalize was called
ok 64 - 2 events
ok 65 - got ok
ok 66 - finalize was called (only 1 plan)
1..66
ok
# You have the following modules installed, which are not compatible with the latest Test::More:
# Installed version (0.02) of Log::Dispatch::Config::TestLog is in range '<= 0.02'
# Installed version (0.11) of Test::Able is in range '<= 0.11'
# Installed version (0.373) of Test::Aggregate is in range '<= 0.373'
# Installed version (0.07) of Test::Builder::Clutch is in range '<= 0.07'
# Installed version (0.16) of Test::Clustericious::Cluster is in range '<= 0.30'
# Installed version (1.1.4) of Test::Dist::VersionSync is in range '<= v1.1.4'
# Installed version (0.11) of Test::Flatten is in range '<= 0.11'
# Installed version (0.20) of Test::Group is in range '<= 0.20'
# Installed version (0.05) of Test::ParallelSubtest is in range '<= 0.05'
# Installed version (0.32) of Test::Pretty is in range '<= 0.32'
# Installed version (0.3.0) of Test::Wrapper is in range '<= v0.3.0'
#
# You should now update these modules!
# You should also see Test2::Transition!
t/zzz-check-breaks.t ...........................
ok 1 - conflicting modules checked
1..1
ok
All tests successful.
Files=170, Tests=2078, 34 wallclock secs ( 1.31 usr 0.45 sys + 25.72 cusr 4.24 csys = 31.72 CPU)
Result: PASS
EXODIST/Test-Simple-1.302015.tar.gz
make test TEST_VERBOSE=1 -- OK
PPD for Test-Simple-1.302015 already made
BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
Has already been unwrapped into directory /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2
BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
Has already been prepared
Running make for B/BO/BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Catalyst/Model/Factory.pm blib/lib/Catalyst/Model/Factory.pm
cp lib/Catalyst/Model/Adaptor.pm blib/lib/Catalyst/Model/Adaptor.pm
cp lib/Catalyst/Helper/Model/Adaptor.pm blib/lib/Catalyst/Helper/Model/Adaptor.pm
cp lib/Catalyst/Model/Adaptor/Base.pm blib/lib/Catalyst/Model/Adaptor/Base.pm
cp lib/Catalyst/Helper/Model/Factory.pm blib/lib/Catalyst/Helper/Model/Factory.pm
cp lib/Catalyst/Model/Factory/PerRequest.pm blib/lib/Catalyst/Model/Factory/PerRequest.pm
cp lib/Catalyst/Helper/Model/Factory/PerRequest.pm blib/lib/Catalyst/Helper/Model/Factory/PerRequest.pm
Manifying 7 pod documents
BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
make -- OK
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t ....
1..4
ok 1 - use Catalyst::Model::Adaptor::Base;
ok 2 - use Catalyst::Model::Adaptor;
ok 3 - use Catalyst::Model::Factory;
ok 4 - use Catalyst::Model::Factory::PerRequest;
ok
t/live-test.t ..
1..49
ok 1 - use TestApp;
ok 2 - get main page
ok 3 - see if it has our text
ok 4 - get the class name
ok 5 - adapted class is itself
ok 6 - get id_twice
ok 7 - same instance both times
ok 8 - get id
ok 9 - same instance for different request
ok 10 - get foo
ok 11 - got foo = bar
ok 12 - get count
ok 13 - get count (+1)
ok 14 - same instance across requests
ok 15 - get count_twice
ok 16 - 3 count for a
ok 17 - 4 count for b
ok 18 - get the class name
ok 19 - adapted class is itself
ok 20 - get id_twice
ok 21 - different instance both times
ok 22 - get id
ok 23 - same instance for different request too
ok 24 - get foo
ok 25 - got foo = factory
ok 26 - get count
ok 27 - get count (+1)
ok 28 - 1st request for a
ok 29 - 1st request for b too
ok 30 - get count_twice
ok 31 - 1 count for a
ok 32 - 1 count for b too
ok 33 - get the class name
ok 34 - adapted class is itself
ok 35 - get id_twice
ok 36 - same instance both times
ok 37 - get id
ok 38 - different instance for different request
ok 39 - get foo
ok 40 - got foo = perrequest
ok 41 - get count
ok 42 - get count (+1)
ok 43 - 1st request for a
ok 44 - 1st request for b too
ok 45 - get count_twice
ok 46 - 1 count for a
ok 47 - 2 count for b
ok 48 - get the class name
ok 49 - got the right package for inner class
ok
All tests successful.
Files=2, Tests=53, 4 wallclock secs ( 0.06 usr 0.02 sys + 3.78 cusr 0.30 csys = 4.16 CPU)
Result: PASS
BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
make test TEST_VERBOSE=1 -- OK
Tomas Doran <bobtfish@bobtfish.net>
use a plain class as a Catalyst model
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2 && tar cvf - Catalyst-Model-Adaptor-0.10.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH/Catalyst-Model-Adaptor-0.10.tar.gz
Catalyst-Model-Adaptor-0.10.ppd
blib/
blib/man3/
blib/man3/Catalyst::Model::Adaptor::Base.3
blib/man3/Catalyst::Helper::Model::Adaptor.3
blib/man3/Catalyst::Helper::Model::Factory::PerRequest.3
blib/man3/Catalyst::Model::Factory::PerRequest.3
blib/man3/Catalyst::Model::Adaptor.3
blib/man3/Catalyst::Model::Factory.3
blib/man3/Catalyst::Helper::Model::Factory.3
blib/lib/
blib/lib/Catalyst/
blib/lib/Catalyst/Helper/
blib/lib/Catalyst/Helper/Model/
blib/lib/Catalyst/Helper/Model/Factory/
blib/lib/Catalyst/Helper/Model/Factory/PerRequest.pm
blib/lib/Catalyst/Helper/Model/Adaptor.pm
blib/lib/Catalyst/Helper/Model/Factory.pm
blib/lib/Catalyst/Model/
blib/lib/Catalyst/Model/Factory/
blib/lib/Catalyst/Model/Factory/PerRequest.pm
blib/lib/Catalyst/Model/Adaptor.pm
blib/lib/Catalyst/Model/Factory.pm
blib/lib/Catalyst/Model/Adaptor/
blib/lib/Catalyst/Model/Adaptor/Base.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/Catalyst-Model-Adaptor-0.10.ppd /data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH
Running test for module 'CatalystX::Profile'
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/J/JJ/JJNAPIORK/CatalystX-Profile-0.02.tar.gz ok
CatalystX-Profile-0.02
CatalystX-Profile-0.02/README
CatalystX-Profile-0.02/LICENSE
CatalystX-Profile-0.02/dist.ini
CatalystX-Profile-0.02/META.yml
CatalystX-Profile-0.02/MANIFEST
CatalystX-Profile-0.02/t
CatalystX-Profile-0.02/t/01basic.t
CatalystX-Profile-0.02/Makefile.PL
CatalystX-Profile-0.02/t/release-pod-syntax.t
CatalystX-Profile-0.02/lib/CatalystX
CatalystX-Profile-0.02/lib/CatalystX/Profile.pm
CatalystX-Profile-0.02/t/release-pod-coverage.t
CatalystX-Profile-0.02/lib/CatalystX/Profile/Controller
CatalystX-Profile-0.02/lib/CatalystX/Profile/Controller/ControlProfiling.pm
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'prepare'
Configuring J/JJ/JJNAPIORK/CatalystX-Profile-0.02.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for CatalystX::Profile
Writing MYMETA.yml and MYMETA.json
JJNAPIORK/CatalystX-Profile-0.02.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for J/JJ/JJNAPIORK/CatalystX-Profile-0.02.tar.gz
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/CatalystX/Profile/Controller/ControlProfiling.pm blib/lib/CatalystX/Profile/Controller/ControlProfiling.pm
cp lib/CatalystX/Profile.pm blib/lib/CatalystX/Profile.pm
Manifying 2 pod documents
JJNAPIORK/CatalystX-Profile-0.02.tar.gz
make -- OK
Prepending /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Test-Simple-1.302015-1TxhjW/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-LeakChecker-0.06-eTitVN/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/arch /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
[debug] Profiling is active
t/01basic.t ...............
1..1
ok 1 - has the profile controller
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=3, Tests=1, 3 wallclock secs ( 0.05 usr 0.03 sys + 2.51 cusr 0.22 csys = 2.81 CPU)
Result: PASS
JJNAPIORK/CatalystX-Profile-0.02.tar.gz
make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/J/JJ/JJNAPIORK/CHECKSUMS
John Napiorkowski <jjnapiork@cpan.org>
Profile your Catalyst application with Devel::NYTProf
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-Profile-0.02-ifEbsJ && tar cvf - CatalystX-Profile-0.02.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/J/JJ/JJNAPIORK/CatalystX-Profile-0.02.tar.gz
CatalystX-Profile-0.02.ppd
blib/
blib/man3/
blib/man3/CatalystX::Profile::Controller::ControlProfiling.3
blib/man3/CatalystX::Profile.3
blib/lib/
blib/lib/CatalystX/
blib/lib/CatalystX/Profile.pm
blib/lib/CatalystX/Profile/
blib/lib/CatalystX/Profile/Controller/
blib/lib/CatalystX/Profile/Controller/ControlProfiling.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/CatalystX-Profile-0.02-ifEbsJ/CatalystX-Profile-0.02.ppd /data/fly2000/cpanfly-5.20/var/REPO/J/JJ/JJNAPIORK
Running test for module 'Catalyst::Authentication::Credential::HTTP'
Prepending %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/B/BO/BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz ok
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/.gitignore
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/Changes
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/lib/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/Makefile.PL
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/MANIFEST
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/META.yml
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/README
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/Todo
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/00use.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/author/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/basic.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/live_app.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/live_app_digest.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/live_app_digest_dotnet.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestDotnetTestApp/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestDotnetTestApp.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestTestApp/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestTestApp.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthTestApp/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthTestApp.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthTestApp/Controller/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthTestApp/Controller/Root.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestTestApp/Controller/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestTestApp/Controller/Root.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestDotnetTestApp/Controller/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/lib/AuthDigestDotnetTestApp/Controller/Root.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/author/pod.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/author/pod_spelling.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/t/author/podcoverage.t
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/lib/Catalyst/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/lib/Catalyst/Authentication/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/lib/Catalyst/Authentication/Credential/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/lib/Catalyst/Authentication/Credential/HTTP.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/AutoInstall.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/AuthorRequires.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/AuthorTests.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/AutoInstall.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Base.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Can.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Fetch.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Include.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Makefile.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Metadata.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/Win32.pm
/bin/tar: Ignoring unknown extended header keyword `SCHILY.dev'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.ino'
/bin/tar: Ignoring unknown extended header keyword `SCHILY.nlink'
Catalyst-Authentication-Credential-HTTP-1.016/inc/Module/Install/WriteAll.pm
Prepending %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'prepare'
Configuring B/BO/BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Cannot determine perl version info from lib/Catalyst/Authentication/Credential/HTTP.pm
*** Module::AutoInstall version 1.06
*** Checking for Perl dependencies...
*** Since we're running under CPAN, I'll just let it take care
of the dependency's installation later.
[Core Features]
- Test::Exception ...loaded. (0.43)
- Test::MockObject ...loaded. (1.20140408)
- Test::More ...loaded. (1.302015 >= 0.88)
- Catalyst::Runtime ...loaded. (5.90104)
- Catalyst::Plugin::Authentication ...loaded. (0.10023 >= 0.10005)
- Data::UUID ...loaded. (1.221 >= 0.11)
- String::Escape ...loaded. (2010.002)
- URI::Escape ...loaded. (3.31)
- Class::Accessor::Fast ...loaded. (0.34)
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Catalyst::Authentication::Credential::HTTP
Writing MYMETA.yml and MYMETA.json
BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz
Prepending %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'make'
>>> make
cp lib/Catalyst/Authentication/Credential/HTTP.pm blib/lib/Catalyst/Authentication/Credential/HTTP.pm
Manifying 1 pod document
BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz
make -- OK
Prepending %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/00use.t t/basic.t t/live_app.t t/live_app_digest.t t/live_app_digest_dotnet.t
# Catalyst 5.90104
# Catalyst::Plugin::Authentication 0.10023
# Catalyst::Authentication::Credential::HTTP 1.016
t/00use.t ...................
ok 1 - use Catalyst;
ok 2 - use Catalyst::Plugin::Authentication;
ok 3 - use Catalyst::Authentication::Credential::HTTP;
1..3
ok
t/basic.t ...................
1..35
ok 1 - use Catalyst::Authentication::Credential::HTTP;
ok 2 - Catalyst::Authentication::Credential::HTTP->can('authenticate')
ok 3 - Catalyst::Authentication::Credential::HTTP->can('authorization_required_response')
ok 4 - Calling authenticate for http auth without header detaches
ok 5 - Calling authenticate for http auth without header detaches
ok 6 - auth successful with header
ok 7 - An object of class 'Test::MockObject' isa 'Catalyst::Authentication::User'
ok 8 - Not called set_authenticated
ok 9 - login delegated
ok 10 - detached on no authorization required with bad auth
ok 11 - 401 status code
ok 12
ok 13
ok 14 - WWW-Authenticate header set: digest
ok 15 - WWW-Authenticate header set: digest realm
ok 16 - WWW-Authenticate header set: basic
ok 17 - WWW-Authenticate header set: basic realm
ok 18 - auth successful with header and alternate password field
ok 19 - detached on bad password (different password field)
ok 20 - detached on no authorization supplied, overridden realm value
ok 21 - 401 status code
ok 22
ok 23
ok 24 - WWW-Authenticate header set: digest realm overridden
ok 25 - WWW-Authenticate header set: basic realm overridden
ok 26 - detached
ok 27 - Body is supplied auth message
ok 28 - detached
ok 29 - Body is not set - user overrode auth message
ok 30 - detached
ok 31 - WWW-Authenticate header set: digest domains set
ok 32 - WWW-Authenticate header set: basic domains set
ok 33 - detached
ok 34 - WWW-Authenticate header set: digest domains set with use_uri_for
ok 35 - WWW-Authenticate header set: basic domains set with use_uri_for
ok
t/live_app.t ................
ok 1 - status is 401
ok 2 - no output
ok 3 - status is 200
ok 4 - foo output
ok 5 - status isnt 401
ok 6 - status is 401
1..6
ok
[warn] Catalyst::Plugin::Cache config found in deprecated $c->config->{cache}, please move to $c->config->{"Plugin::Cache"}.
[warn] Catalyst::Plugin::Cache config found in deprecated $c->config->{cache}, please move to $c->config->{"Plugin::Cache"}.
t/live_app_digest.t .........
1..12
ok 1 - status is 401
ok 2 - no output
ok 3 - status is 200
ok 4 - Mufasa output
ok 5 - status is 401
ok 6 - no output
ok 7 - status is 200
ok 8 - Mufasa output
ok 9 - status is 401
ok 10 - no output
ok 11 - status is 200
ok 12 - Mufasa output
ok
[warn] Catalyst::Plugin::Cache config found in deprecated $c->config->{cache}, please move to $c->config->{"Plugin::Cache"}.
[warn] Catalyst::Plugin::Cache config found in deprecated $c->config->{cache}, please move to $c->config->{"Plugin::Cache"}.
[warn] Catalyst::Plugin::Cache config found in deprecated $c->config->{cache}, please move to $c->config->{"Plugin::Cache"}.
t/live_app_digest_dotnet.t ..
1..19
ok 1 - status is 401
ok 2 - no output
ok 3 - status is 200
ok 4 - Mufasa output
ok 5 - status is 401
ok 6 - no output
ok 7 - status is 200
ok 8 - Mufasa output
ok 9 - status is 401
ok 10 - no output
ok 11 - status is 200
ok 12 - Mufasa output
ok 13 - status is 401
ok 14 - no output
ok 15 - status is 200
ok 16 - Mufasa output
ok 17 - status is 401
ok 18 - no output
ok 19 - status is 400
ok
All tests successful.
Files=5, Tests=75, 12 wallclock secs ( 0.08 usr 0.02 sys + 11.15 cusr 1.02 csys = 12.27 CPU)
Result: PASS
BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz
make test TEST_VERBOSE=1 -- OK
Tomas Doran <bobtfish@bobtfish.net>
HTTP Basic and Digest authentication
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S && tar cvf - Catalyst-Authentication-Credential-HTTP-1.016.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH/Catalyst-Authentication-Credential-HTTP-1.016.tar.gz
Catalyst-Authentication-Credential-HTTP-1.016.ppd
blib/
blib/man3/
blib/man3/Catalyst::Authentication::Credential::HTTP.3
blib/lib/
blib/lib/Catalyst/
blib/lib/Catalyst/Authentication/
blib/lib/Catalyst/Authentication/Credential/
blib/lib/Catalyst/Authentication/Credential/HTTP.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/Catalyst-Authentication-Credential-HTTP-1.016.ppd /data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH
Running test for module 'Catalyst::Plugin::StackTrace'
Prepending %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'get'
Checksum for /data/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/B/BO/BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz ok
Catalyst-Plugin-StackTrace-0.12/
Catalyst-Plugin-StackTrace-0.12/Changes
Catalyst-Plugin-StackTrace-0.12/inc/
Catalyst-Plugin-StackTrace-0.12/lib/
Catalyst-Plugin-StackTrace-0.12/Makefile.PL
Catalyst-Plugin-StackTrace-0.12/MANIFEST
Catalyst-Plugin-StackTrace-0.12/META.yml
Catalyst-Plugin-StackTrace-0.12/t/
Catalyst-Plugin-StackTrace-0.12/t/01use.t
Catalyst-Plugin-StackTrace-0.12/t/02pod.t
Catalyst-Plugin-StackTrace-0.12/t/03podcoverage.t
Catalyst-Plugin-StackTrace-0.12/t/04critic.t
Catalyst-Plugin-StackTrace-0.12/t/04trace.t
Catalyst-Plugin-StackTrace-0.12/t/05verbose1.t
Catalyst-Plugin-StackTrace-0.12/t/06verbose2.t
Catalyst-Plugin-StackTrace-0.12/t/07reverse.t
Catalyst-Plugin-StackTrace-0.12/t/08die_handler.t
Catalyst-Plugin-StackTrace-0.12/t/lib/
Catalyst-Plugin-StackTrace-0.12/t/lib/TestApp/
Catalyst-Plugin-StackTrace-0.12/t/lib/TestApp.pm
Catalyst-Plugin-StackTrace-0.12/t/lib/TestApp/Controller/
Catalyst-Plugin-StackTrace-0.12/t/lib/TestApp/Exception.pm
Catalyst-Plugin-StackTrace-0.12/t/lib/TestApp/Controller/Foo.pm
Catalyst-Plugin-StackTrace-0.12/lib/Catalyst/
Catalyst-Plugin-StackTrace-0.12/lib/Catalyst/Plugin/
Catalyst-Plugin-StackTrace-0.12/lib/Catalyst/Plugin/StackTrace.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Base.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Can.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Fetch.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Makefile.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Metadata.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/Win32.pm
Catalyst-Plugin-StackTrace-0.12/inc/Module/Install/WriteAll.pm
Prepending %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'prepare'
Configuring B/BO/BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz with Makefile.PL
>>> /data/fly2000/ap2000-298540/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2000/cpanfly-5.20/var/megalib
Want /home/fly2000/ap2000-298540/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Catalyst::Plugin::StackTrace
Writing MYMETA.yml and MYMETA.json
BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz
/data/fly2000/ap2000-298540/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz
Prepending %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'make'
>>> make
cp lib/Catalyst/Plugin/StackTrace.pm blib/lib/Catalyst/Plugin/StackTrace.pm
Manifying 1 pod document
BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz
make -- OK
Prepending %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/01use.t ..........
1..1
ok 1 - use Catalyst::Plugin::StackTrace;
ok
t/02pod.t .......... skipped: set TEST_POD to enable this test
t/03podcoverage.t .. skipped: set TEST_POD to enable this test
t/04critic.t ....... skipped: Critic test only for developers.
Cannot determine desired terminal width, using default of 80 columns
t/04trace.t ........
1..10
ok 1 - request ok
ok 2 - response ok
ok 3 - request ok
ok 4 - error ok
ok 5 - trace ok
ok 6 - line number ok
ok 7 - context ok
ok 8 - request ok
ok 9 - error ok
ok 10 - trace disable
ok
Cannot determine desired terminal width, using default of 80 columns
t/05verbose1.t .....
1..3
ok 1 - request ok
ok 2 - verbose ok
ok 3 - verbose level 1 ok
ok
Cannot determine desired terminal width, using default of 80 columns
t/06verbose2.t .....
1..3
ok 1 - request ok
ok 2 - verbose ok
ok 3 - verbose level 2 ok
ok
Cannot determine desired terminal width, using default of 80 columns
t/07reverse.t ......
1..6
ok 1 - request ok
ok 2 - normal order ok
ok 3 - not reversed ok
ok 4 - request ok
ok 5 - reverse order ok
ok 6 - not normal order
ok
Cannot determine desired terminal width, using default of 80 columns
t/08die_handler.t ..
1..4
ok 1 - request ok
ok 2 - original exception thrown
ok 3 - request ok
ok 4 - object exception thrown
ok
All tests successful.
Files=9, Tests=27, 12 wallclock secs ( 0.08 usr 0.04 sys + 11.18 cusr 0.94 csys = 12.24 CPU)
Result: PASS
BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz
make test TEST_VERBOSE=1 -- OK
Tomas Doran <bobtfish@bobtfish.net>
Display a stack trace on the debug screen
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-StackTrace-0.12-SW_Ma5 && tar cvf - Catalyst-Plugin-StackTrace-0.12.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH/Catalyst-Plugin-StackTrace-0.12.tar.gz
Catalyst-Plugin-StackTrace-0.12.ppd
blib/
blib/man3/
blib/man3/Catalyst::Plugin::StackTrace.3
blib/lib/
blib/lib/Catalyst/
blib/lib/Catalyst/Plugin/
blib/lib/Catalyst/Plugin/StackTrace.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/Catalyst-Plugin-StackTrace-0.12.ppd /data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH
BOBTFISH/Task-Catalyst-4.02.tar.gz
Has already been unwrapped into directory /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Catalyst-4.02-_9G7_l
BOBTFISH/Task-Catalyst-4.02.tar.gz
Has already been prepared
Running make for B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
Prepending %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/arch %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/lib %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'make'
>>> make
cp lib/Task/Catalyst.pm blib/lib/Task/Catalyst.pm
Manifying 1 pod document
BOBTFISH/Task-Catalyst-4.02.tar.gz
make -- OK
Prepending %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/arch %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/lib %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/task-bogus.t ............
1..1
ok 1 - tasks need no tests, but CPAN clients demand them
ok
All tests successful.
Files=3, Tests=1, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.31 cusr 0.07 csys = 0.45 CPU)
Result: PASS
BOBTFISH/Task-Catalyst-4.02.tar.gz
make test TEST_VERBOSE=1 -- OK
Tomas Doran <bobtfish@bobtfish.net>
All you need to start with Catalyst
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Catalyst-4.02-_9G7_l && tar cvf - Task-Catalyst-4.02.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
Task-Catalyst-4.02.ppd
blib/
blib/man3/
blib/man3/Task::Catalyst.3
blib/lib/
blib/lib/Task/
blib/lib/Task/Catalyst.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Catalyst-4.02-_9G7_l/Task-Catalyst-4.02.ppd /data/fly2000/cpanfly-5.20/var/REPO/B/BO/BOBTFISH
ETHER/Task-Kensho-WebDev-0.39.tar.gz
Has already been unwrapped into directory /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Kensho-WebDev-0.39-R7uZnO
ETHER/Task-Kensho-WebDev-0.39.tar.gz
Has already been prepared
Running make for E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Prepending %BUILDDIR%/Task-Catalyst-4.02-_9G7_l/blib/arch %BUILDDIR%/Task-Catalyst-4.02-_9G7_l/blib/lib %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/arch %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/lib %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'make'
>>> make
cp lib/Task/Kensho/WebDev.pm blib/lib/Task/Kensho/WebDev.pm
Manifying 1 pod document
ETHER/Task-Kensho-WebDev-0.39.tar.gz
make -- OK
Prepending %BUILDDIR%/Task-Catalyst-4.02-_9G7_l/blib/arch %BUILDDIR%/Task-Catalyst-4.02-_9G7_l/blib/lib %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/arch %BUILDDIR%/Catalyst-Plugin-StackTrace-0.12-SW_Ma5/blib/lib %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/arch %BUILDDIR%/Catalyst-Authentication-Credential-HTTP-1.016-YLJz3S/blib/lib %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/arch %BUILDDIR%/CatalystX-Profile-0.02-ifEbsJ/blib/lib %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/arch %BUILDDIR%/Catalyst-Model-Adaptor-0.10-xMBWv2/blib/lib %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/arch %BUILDDIR%/Test-Simple-1.302015-1TxhjW/blib/lib %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/arch %BUILDDIR%/CatalystX-LeakChecker-0.06-eTitVN/blib/lib %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/arch %BUILDDIR%/Catalyst-Plugin-I18N-0.10-dXjSHF/blib/lib %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/arch %BUILDDIR%/CatalystX-REPL-0.04-SOkCji/blib/lib to PERL5LIB; %BUILDDIR%=/data/fly2000/cpanfly-5.20/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2000/ap2000-298540/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ----- -----
# Module::Build::Tiny 0.034 0.039
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.04
#
# === Test Requires ===
#
# Module Want Have
# ---------------- ---- --------
# File::Spec any 3.62
# Module::Metadata any 1.000027
# Test::More any 1.302015
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150005
#
# === Runtime Requires ===
#
# Module Want Have
# ------------------------------ ---- --------
# CGI::FormBuilder::Source::Perl any 0.01
# Dancer2 any 0.166001
# HTML::FormHandler any 0.40065
# MIME::Types any 2.13
# Mojolicious any 5.68
# Plack any 1.0039
# Task::Catalyst any 4.02
# Template any 2.26
# XML::Atom any 0.41
# XML::RSS any 1.59
# strict any 1.08
# warnings any 1.23
#
t/00-report-prereqs.t ..
1..1
ok 1
ok
All tests successful.
Files=1, Tests=1, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.51 cusr 0.04 csys = 0.60 CPU)
Result: PASS
ETHER/Task-Kensho-WebDev-0.39.tar.gz
make test TEST_VERBOSE=1 -- OK
Karen Etheridge <ether@cpan.org>
A Glimpse at an Enlightened Perl: Web Development
>>> (cd /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Kensho-WebDev-0.39-R7uZnO && tar cvf - Task-Kensho-WebDev-0.39.ppd blib) | gzip -c >/data/fly2000/cpanfly-5.20/var/REPO/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Task-Kensho-WebDev-0.39.ppd
blib/
blib/man3/
blib/man3/Task::Kensho::WebDev.3
blib/lib/
blib/lib/Task/
blib/lib/Task/Kensho/
blib/lib/Task/Kensho/WebDev.pm
>>> mv /data/fly2000/cpanfly-5.20/var/cpan/build/Task-Kensho-WebDev-0.39-R7uZnO/Task-Kensho-WebDev-0.39.ppd /data/fly2000/cpanfly-5.20/var/REPO/E/ET/ETHER
VmSize: 347692 kB
Finished 2016-05-15T16:49:08