PATH=/usr/bin:/bin:/data/fly2200/cpanfly-5.22/var/megalib/bin
Start 2016-05-25T06:01:41
ActivePerl-2200 CPAN-2.10
Reading '/data/fly2200/cpanfly-5.22/var/cpan/Metadata'
  Database was generated on Wed, 25 May 2016 05:41:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/CHECKSUMS
Checksum for /data/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz ok
App-SahUtils-0.28/
App-SahUtils-0.28/bin/
App-SahUtils-0.28/bin/coerce-with-sah
App-SahUtils-0.28/bin/validate-with-sah
App-SahUtils-0.28/bin/normalize-sah-schema
App-SahUtils-0.28/bin/show-sah-schema-module
App-SahUtils-0.28/bin/sah-to-human
App-SahUtils-0.28/bin/list-sah-schema-modules
App-SahUtils-0.28/README
App-SahUtils-0.28/lib/
App-SahUtils-0.28/lib/App/
App-SahUtils-0.28/lib/App/SahUtils.pm
App-SahUtils-0.28/Makefile.PL
App-SahUtils-0.28/Changes
App-SahUtils-0.28/dist.ini
App-SahUtils-0.28/LICENSE
App-SahUtils-0.28/t/
App-SahUtils-0.28/t/00-compile.t
App-SahUtils-0.28/t/release-rinci.t
App-SahUtils-0.28/t/author-pod-syntax.t
App-SahUtils-0.28/t/author-pod-coverage.t
App-SahUtils-0.28/weaver.ini
App-SahUtils-0.28/MANIFEST
App-SahUtils-0.28/META.json
App-SahUtils-0.28/META.yml
Configuring P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz with Makefile.PL
>>> /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL
Warning: prerequisite Data::Sah::Coerce 0.011 not found. We have 0.010.
Warning: prerequisite Data::Sah::CoerceCommon 0.011 not found. We have 0.010.
Warning: prerequisite Data::Sah::CoerceJS 0.011 not found. We have 0.010.
Checking if your kit is complete...
Looks good
Have /data/fly2200/cpanfly-5.22/var/megalib
Want /home/fly2200/ap2200-299134/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for App::SahUtils
Writing MYMETA.yml and MYMETA.json
Modifying Makefile to generate shell completion on install
  PERLANCAR/App-SahUtils-0.28.tar.gz
  /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL -- OK
Running make for P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz
---- Unsatisfied dependencies detected during ----
----    PERLANCAR/App-SahUtils-0.28.tar.gz    ----
    Data::Sah::CoerceJS [requires]
    Data::Sah::CoerceCommon [requires]
    Data::Sah::Coerce [requires]
Running test for module 'Data::Sah::CoerceJS'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
Checksum for /data/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Data-Sah-Coerce-0.012.tar.gz ok
Data-Sah-Coerce-0.012/
Data-Sah-Coerce-0.012/README
Data-Sah-Coerce-0.012/lib/
Data-Sah-Coerce-0.012/lib/Data/
Data-Sah-Coerce-0.012/lib/Data/Sah/
Data-Sah-Coerce-0.012/lib/Data/Sah/CoerceCommon.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/date/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/date/float_epoch.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/date/str.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/date/obj_Date.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/bool/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/bool/str.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/bool/float.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/duration/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/duration/str_iso8601.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/js/duration/float_secs.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/date/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/date/str_iso8601.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/date/float_epoch.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/date/obj_TimeMoment.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/date/obj_DateTime.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/bool/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/bool/str.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/duration/
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/duration/str_human.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/duration/str_iso8601.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/duration/obj_DateTimeDuration.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/Coerce/perl/duration/float_secs.pm
Data-Sah-Coerce-0.012/lib/Data/Sah/CoerceJS.pm
Data-Sah-Coerce-0.012/Makefile.PL
Data-Sah-Coerce-0.012/Changes
Data-Sah-Coerce-0.012/dist.ini
Data-Sah-Coerce-0.012/LICENSE
Data-Sah-Coerce-0.012/t/
Data-Sah-Coerce-0.012/t/perl-date.t
Data-Sah-Coerce-0.012/t/00-compile.t
Data-Sah-Coerce-0.012/t/js-duration.t
Data-Sah-Coerce-0.012/t/01-basic.t
Data-Sah-Coerce-0.012/t/perl-duration.t
Data-Sah-Coerce-0.012/t/js-bool.t
Data-Sah-Coerce-0.012/t/release-rinci.t
Data-Sah-Coerce-0.012/t/perl-bool.t
Data-Sah-Coerce-0.012/t/author-pod-syntax.t
Data-Sah-Coerce-0.012/t/author-pod-coverage.t
Data-Sah-Coerce-0.012/t/js-date.t
Data-Sah-Coerce-0.012/weaver.ini
Data-Sah-Coerce-0.012/MANIFEST
Data-Sah-Coerce-0.012/META.json
Data-Sah-Coerce-0.012/META.yml
Configuring P/PE/PERLANCAR/Data-Sah-Coerce-0.012.tar.gz with Makefile.PL
>>> /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2200/cpanfly-5.22/var/megalib
Want /home/fly2200/ap2200-299134/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Data::Sah::Coerce
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
>>> make
cp lib/Data/Sah/Coerce/js/bool/str.pm blib/lib/Data/Sah/Coerce/js/bool/str.pm
cp lib/Data/Sah/Coerce/js/bool/float.pm blib/lib/Data/Sah/Coerce/js/bool/float.pm
cp lib/Data/Sah/Coerce/perl/duration/str_iso8601.pm blib/lib/Data/Sah/Coerce/perl/duration/str_iso8601.pm
cp lib/Data/Sah/Coerce/perl/duration/float_secs.pm blib/lib/Data/Sah/Coerce/perl/duration/float_secs.pm
cp lib/Data/Sah/Coerce/perl/bool/str.pm blib/lib/Data/Sah/Coerce/perl/bool/str.pm
cp lib/Data/Sah/Coerce/perl/duration/obj_DateTimeDuration.pm blib/lib/Data/Sah/Coerce/perl/duration/obj_DateTimeDuration.pm
cp lib/Data/Sah/Coerce/perl/date/str_iso8601.pm blib/lib/Data/Sah/Coerce/perl/date/str_iso8601.pm
cp lib/Data/Sah/Coerce/perl/date/obj_TimeMoment.pm blib/lib/Data/Sah/Coerce/perl/date/obj_TimeMoment.pm
cp lib/Data/Sah/Coerce/perl/duration/str_human.pm blib/lib/Data/Sah/Coerce/perl/duration/str_human.pm
cp lib/Data/Sah/Coerce/perl/date/obj_DateTime.pm blib/lib/Data/Sah/Coerce/perl/date/obj_DateTime.pm
cp lib/Data/Sah/Coerce/js/duration/str_iso8601.pm blib/lib/Data/Sah/Coerce/js/duration/str_iso8601.pm
cp lib/Data/Sah/Coerce/js/duration/float_secs.pm blib/lib/Data/Sah/Coerce/js/duration/float_secs.pm
cp lib/Data/Sah/Coerce/js/date/str.pm blib/lib/Data/Sah/Coerce/js/date/str.pm
cp lib/Data/Sah/Coerce/js/date/obj_Date.pm blib/lib/Data/Sah/Coerce/js/date/obj_Date.pm
cp lib/Data/Sah/CoerceCommon.pm blib/lib/Data/Sah/CoerceCommon.pm
cp lib/Data/Sah/Coerce.pm blib/lib/Data/Sah/Coerce.pm
cp lib/Data/Sah/CoerceJS.pm blib/lib/Data/Sah/CoerceJS.pm
cp lib/Data/Sah/Coerce/perl/date/float_epoch.pm blib/lib/Data/Sah/Coerce/perl/date/float_epoch.pm
cp lib/Data/Sah/Coerce/js/date/float_epoch.pm blib/lib/Data/Sah/Coerce/js/date/float_epoch.pm
Manifying 19 pod documents
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2200/ap2200-299134/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........... 
1..19
ok 1 - Data/Sah/Coerce.pm loaded ok
ok 2 - Data/Sah/Coerce/js/bool/float.pm loaded ok
ok 3 - Data/Sah/Coerce/js/bool/str.pm loaded ok
ok 4 - Data/Sah/Coerce/js/date/float_epoch.pm loaded ok
ok 5 - Data/Sah/Coerce/js/date/obj_Date.pm loaded ok
ok 6 - Data/Sah/Coerce/js/date/str.pm loaded ok
ok 7 - Data/Sah/Coerce/js/duration/float_secs.pm loaded ok
ok 8 - Data/Sah/Coerce/js/duration/str_iso8601.pm loaded ok
ok 9 - Data/Sah/Coerce/perl/bool/str.pm loaded ok
ok 10 - Data/Sah/Coerce/perl/date/float_epoch.pm loaded ok
ok 11 - Data/Sah/Coerce/perl/date/obj_DateTime.pm loaded ok
ok 12 - Data/Sah/Coerce/perl/date/obj_TimeMoment.pm loaded ok
ok 13 - Data/Sah/Coerce/perl/date/str_iso8601.pm loaded ok
ok 14 - Data/Sah/Coerce/perl/duration/float_secs.pm loaded ok
ok 15 - Data/Sah/Coerce/perl/duration/obj_DateTimeDuration.pm loaded ok
ok 16 - Data/Sah/Coerce/perl/duration/str_human.pm loaded ok
ok 17 - Data/Sah/Coerce/perl/duration/str_iso8601.pm loaded ok
ok 18 - Data/Sah/CoerceCommon.pm loaded ok
ok 19 - Data/Sah/CoerceJS.pm loaded ok
ok
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
t/01-basic.t ............. 
    # Subtest: opt:coerce_rules
        # Subtest: unknown name -> dies
        ok 1
        1..1
    ok 1 - unknown name -> dies
        # Subtest: unknown name in !name -> ignored
        ok 1
        ok 2
        1..2
    ok 2 - unknown name in !name -> ignored
        # Subtest: default (date)
        ok 1
        1..1
    ok 3 - default (date)
        # Subtest: default (bool)
        ok 1
        1..1
    ok 4 - default (bool)
        # Subtest: all
        ok 1
        ok 2
        1..2
    ok 5 - all
        # Subtest: none
        ok 1
        1..1
    ok 6 - none
        # Subtest: only R
        ok 1
        ok 2
        1..2
    ok 7 - only R
        # Subtest: only /^R/
        ok 1
        ok 2
        1..2
    ok 8 - only /^R/
        # Subtest: default + R
        ok 1
        ok 2
        1..2
    ok 9 - default + R
        # Subtest: default + /^R/
        ok 1
        ok 2
        1..2
    ok 10 - default + /^R/
        # Subtest: default - R
        ok 1
        ok 2
        1..2
    ok 11 - default - R
        # Subtest: default - /^R/
        ok 1
        ok 2
        1..2
    ok 12 - default - /^R/
    1..12
ok 1 - opt:coerce_rules
    # Subtest: opt:return_type=sah+val
        # Subtest: perl
        ok 1
        ok 2
        1..2
    ok 1 - perl
        # Subtest: js
        1..0 # SKIP node.js not available
    ok 2 # skip node.js not available
    1..2
ok 2 - opt:return_type=sah+val
1..2
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/js-bool.t .............. skipped: node.js is not available
t/js-date.t .............. skipped: node.js is not available
t/js-duration.t .......... skipped: node.js not available
t/perl-bool.t ............ 
    # Subtest: coerce_to=
        # Subtest: uncoerced
        ok 1 - uncoerced
        ok 2 - uncoerced
        ok 3 - uncoerced
        ok 4 - uncoerced
        1..4
    ok 1 - uncoerced
    1..1
ok 1 - coerce_to=
    # Subtest: coerce_to=, +rule str
        # Subtest: uncoerced
        ok 1 - uncoerced
        ok 2 - uncoerced
        ok 3 - uncoerced
        1..3
    ok 1 - uncoerced
        # Subtest: from str
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        ok 6
        ok 7
        1..7
    ok 2 - from str
    1..2
ok 2 - coerce_to=, +rule str
1..2
ok
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_en' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
Coercion rule module 'Data::Sah::Coerce::perl::date::str_alami_id' is still at metadata version 1, will not be used at /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib/Data/Sah/CoerceCommon.pm line 219.
t/perl-date.t ............ 
    # Subtest: coerce_to=float(epoch)
        # Subtest: uncoerced
        ok 1 - uncoerced
        ok 2
        1..2
    ok 1 - uncoerced
        # Subtest: from float
        ok 1
        1..1
    ok 2 - from float
        # Subtest: from DateTime object
        ok 1
        1..1
    ok 3 - from DateTime object
        # Subtest: from Time::Moment object
        ok 1
        1..1
    ok 4 - from Time::Moment object
        # Subtest: from iso8601 string
        ok 1
        1..1
    ok 5 - from iso8601 string
    1..5
ok 1 - coerce_to=float(epoch)
    # Subtest: coerce_to=DateTime
        # Subtest: uncoerced
        ok 1 - uncoerced
        ok 2
        1..2
    ok 1 - uncoerced
        # Subtest: from float
        ok 1
        ok 2
        1..2
    ok 2 - from float
        # Subtest: from DateTime object
        ok 1
        ok 2
        1..2
    ok 3 - from DateTime object
        # Subtest: from Time::Moment object
        ok 1
        ok 2
        1..2
    ok 4 - from Time::Moment object
        # Subtest: from iso8601 string
        ok 1
        ok 2
        1..2
    ok 5 - from iso8601 string
    1..5
ok 2 - coerce_to=DateTime
    # Subtest: coerce_to=Time::Moment
        # Subtest: uncoerced
        ok 1 - uncoerced
        ok 2
        1..2
    ok 1 - uncoerced
        # Subtest: from float
        ok 1
        ok 2
        1..2
    ok 2 - from float
        # Subtest: from DateTime object
        ok 1
        ok 2
        1..2
    ok 3 - from DateTime object
        # Subtest: from Time::Moment object
        ok 1
        ok 2
        1..2
    ok 4 - from Time::Moment object
        # Subtest: from iso8601 string
        ok 1
        ok 2
        1..2
    ok 5 - from iso8601 string
    1..5
ok 3 - coerce_to=Time::Moment
1..3
ok
t/perl-duration.t ........ 
    # Subtest: coerce_to=float(secs)
        # Subtest: uncoerced
        ok 1 - uncoerced
        1..1
    ok 1 - uncoerced
        # Subtest: from float
        ok 1
        1..1
    ok 2 - from float
        # Subtest: from DateTime::Duration object
        ok 1
        1..1
    ok 3 - from DateTime::Duration object
        # Subtest: from human string
        ok 1
        1..1
    ok 4 - from human string
        # Subtest: from iso8601 string
        ok 1
        1..1
    ok 5 - from iso8601 string
    1..5
ok 1 - coerce_to=float(secs)
    # Subtest: coerce_to=DateTime::Duration
        # Subtest: uncoerced
        ok 1 - uncoerced
        1..1
    ok 1 - uncoerced
        # Subtest: from float
        ok 1
        ok 2
        1..2
    ok 2 - from float
        # Subtest: from DateTime::Duration object
        ok 1
        ok 2
        ok 3
        ok 4
        1..4
    ok 3 - from DateTime::Duration object
        # Subtest: from human string
        ok 1
        ok 2
        ok 3
        ok 4
        1..4
    ok 4 - from human string
        # Subtest: from iso8601 string
        ok 1
        ok 2
        ok 3
        ok 4
        1..4
    ok 5 - from iso8601 string
    1..5
ok 2 - coerce_to=DateTime::Duration
1..2
ok
t/release-rinci.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=11, Tests=28,  5 wallclock secs ( 0.11 usr  0.04 sys +  1.80 cusr  0.25 csys =  2.20 CPU)
Result: PASS
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Data-Sah-Coerce" VERSION="0.012" DATE="2016-05-24">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Coercion rules for Data::Sah</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.22"/>
  <CODEBASE HREF="Data-Sah-Coerce-0.012.tar.gz"/>
  <PROVIDE NAME="Data::Sah::CoerceJS" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::CoerceCommon" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::date::obj_DateTime" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::date::float_epoch" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::date::str_iso8601" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::date::obj_TimeMoment" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::bool::str" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::duration::str_human" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::duration::float_secs" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::duration::str_iso8601" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::perl::duration::obj_DateTimeDuration" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::date::float_epoch" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::date::obj_Date" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::date::str" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::bool::float" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::bool::str" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::duration::float_secs" VERSION="0.012"/>
  <PROVIDE NAME="Data::Sah::Coerce::js::duration::str_iso8601" VERSION="0.012"/>
  <REQUIRE NAME="Exporter::"/>
  <REQUIRE NAME="File::Temp"/>
  <REQUIRE NAME="JSON::MaybeXS"/>
  <REQUIRE NAME="Log::Any::IfLOG" VERSION="0.07"/>
  <REQUIRE NAME="Nodejs::Util"/>
  <REQUIRE NAME="PERLANCAR::Module::List"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2016-05-25 with ActivePerl-2200 on perl-stackato64-precise (Linux perl-stackato64-precise 3.2.0-24-virtual #39-Ubuntu SMP Mon May 21 18:44:18 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux) log App-SahUtils-0.28.d/log-20160525T060139.txt -->
</SOFTPKG>
>>> (cd /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL && tar cvf - Data-Sah-Coerce-0.012.ppd blib) | gzip -c >/data/fly2200/cpanfly-5.22/var/REPO/P/PE/PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
Data-Sah-Coerce-0.012.ppd
blib/
blib/man3/
blib/man3/Data::Sah::Coerce::perl::date::float_epoch.3
blib/man3/Data::Sah::Coerce::perl::duration::obj_DateTimeDuration.3
blib/man3/Data::Sah::Coerce::js::duration::float_secs.3
blib/man3/Data::Sah::Coerce::perl::duration::float_secs.3
blib/man3/Data::Sah::Coerce.3
blib/man3/Data::Sah::Coerce::js::bool::str.3
blib/man3/Data::Sah::CoerceJS.3
blib/man3/Data::Sah::Coerce::perl::date::obj_TimeMoment.3
blib/man3/Data::Sah::Coerce::js::date::obj_Date.3
blib/man3/Data::Sah::Coerce::js::date::str.3
blib/man3/Data::Sah::Coerce::perl::duration::str_human.3
blib/man3/Data::Sah::Coerce::perl::bool::str.3
blib/man3/Data::Sah::Coerce::js::date::float_epoch.3
blib/man3/Data::Sah::CoerceCommon.3
blib/man3/Data::Sah::Coerce::perl::date::obj_DateTime.3
blib/man3/Data::Sah::Coerce::js::bool::float.3
blib/man3/Data::Sah::Coerce::js::duration::str_iso8601.3
blib/man3/Data::Sah::Coerce::perl::date::str_iso8601.3
blib/man3/Data::Sah::Coerce::perl::duration::str_iso8601.3
blib/lib/
blib/lib/Data/
blib/lib/Data/Sah/
blib/lib/Data/Sah/CoerceJS.pm
blib/lib/Data/Sah/CoerceCommon.pm
blib/lib/Data/Sah/Coerce/
blib/lib/Data/Sah/Coerce/perl/
blib/lib/Data/Sah/Coerce/perl/date/
blib/lib/Data/Sah/Coerce/perl/date/obj_DateTime.pm
blib/lib/Data/Sah/Coerce/perl/date/float_epoch.pm
blib/lib/Data/Sah/Coerce/perl/date/str_iso8601.pm
blib/lib/Data/Sah/Coerce/perl/date/obj_TimeMoment.pm
blib/lib/Data/Sah/Coerce/perl/bool/
blib/lib/Data/Sah/Coerce/perl/bool/str.pm
blib/lib/Data/Sah/Coerce/perl/duration/
blib/lib/Data/Sah/Coerce/perl/duration/str_human.pm
blib/lib/Data/Sah/Coerce/perl/duration/float_secs.pm
blib/lib/Data/Sah/Coerce/perl/duration/str_iso8601.pm
blib/lib/Data/Sah/Coerce/perl/duration/obj_DateTimeDuration.pm
blib/lib/Data/Sah/Coerce/js/
blib/lib/Data/Sah/Coerce/js/date/
blib/lib/Data/Sah/Coerce/js/date/float_epoch.pm
blib/lib/Data/Sah/Coerce/js/date/obj_Date.pm
blib/lib/Data/Sah/Coerce/js/date/str.pm
blib/lib/Data/Sah/Coerce/js/bool/
blib/lib/Data/Sah/Coerce/js/bool/float.pm
blib/lib/Data/Sah/Coerce/js/bool/str.pm
blib/lib/Data/Sah/Coerce/js/duration/
blib/lib/Data/Sah/Coerce/js/duration/float_secs.pm
blib/lib/Data/Sah/Coerce/js/duration/str_iso8601.pm
blib/lib/Data/Sah/Coerce.pm
>>> mv /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/Data-Sah-Coerce-0.012.ppd /data/fly2200/cpanfly-5.22/var/REPO/P/PE/PERLANCAR
Running test for module 'Data::Sah::CoerceCommon'
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been unwrapped into directory /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been prepared
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been made
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been tested successfully
Running test for module 'Data::Sah::Coerce'
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been unwrapped into directory /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been prepared
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been made
  PERLANCAR/Data-Sah-Coerce-0.012.tar.gz
  Has already been tested successfully
  PERLANCAR/App-SahUtils-0.28.tar.gz
  Has already been unwrapped into directory /data/fly2200/cpanfly-5.22/var/cpan/build/App-SahUtils-0.28-ry12KM
  PERLANCAR/App-SahUtils-0.28.tar.gz
  Has already been prepared
Running make for P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz
Prepending /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/arch /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/App/SahUtils.pm blib/lib/App/SahUtils.pm
cp bin/validate-with-sah blib/script/validate-with-sah
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/validate-with-sah
cp bin/coerce-with-sah blib/script/coerce-with-sah
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/coerce-with-sah
cp bin/list-sah-schema-modules blib/script/list-sah-schema-modules
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/list-sah-schema-modules
cp bin/normalize-sah-schema blib/script/normalize-sah-schema
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/normalize-sah-schema
cp bin/sah-to-human blib/script/sah-to-human
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/sah-to-human
cp bin/show-sah-schema-module blib/script/show-sah-schema-module
"/data/fly2200/ap2200-299134/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/show-sah-schema-module
Manifying 6 pod documents
Manifying 1 pod document
  PERLANCAR/App-SahUtils-0.28.tar.gz
  make -- OK
Prepending /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/arch /data/fly2200/cpanfly-5.22/var/cpan/build/Data-Sah-Coerce-0.012-KDDYnL/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2200/ap2200-299134/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........... 
1..7
ok 1 - App/SahUtils.pm loaded ok
ok 2 - bin/coerce-with-sah compiled ok
ok 3 - bin/list-sah-schema-modules compiled ok
ok 4 - bin/normalize-sah-schema compiled ok
ok 5 - bin/sah-to-human compiled ok
ok 6 - bin/show-sah-schema-module compiled ok
ok 7 - bin/validate-with-sah compiled ok
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/release-rinci.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=7,  1 wallclock secs ( 0.06 usr  0.02 sys +  0.50 cusr  0.12 csys =  0.70 CPU)
Result: PASS
  PERLANCAR/App-SahUtils-0.28.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="App-SahUtils" VERSION="0.28" DATE="2016-05-25">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Collection of CLI utilities for Sah and Data::Sah</ABSTRACT>
  <ARCHITECTURE NAME="x86_64-linux-thread-multi-5.22"/>
  <CODEBASE HREF="App-SahUtils-0.28.tar.gz"/>
  <PROVIDE NAME="App::SahUtils" VERSION="0.28"/>
  <REQUIRE NAME="Complete::Module"/>
  <REQUIRE NAME="Data::Dump"/>
  <REQUIRE NAME="Data::Dump::Color"/>
  <REQUIRE NAME="Data::Sah" VERSION="0.76"/>
  <REQUIRE NAME="Data::Sah::Coerce" VERSION="0.011"/>
  <REQUIRE NAME="Data::Sah::CoerceCommon" VERSION="0.011"/>
  <REQUIRE NAME="Data::Sah::CoerceJS" VERSION="0.011"/>
  <REQUIRE NAME="Data::Sah::JS" VERSION="0.47"/>
  <REQUIRE NAME="Data::Sah::Normalize"/>
  <REQUIRE NAME="File::Slurper"/>
  <REQUIRE NAME="JSON::MaybeXS"/>
  <REQUIRE NAME="PERLANCAR::Module::List"/>
  <REQUIRE NAME="Perinci::CmdLine::Any" VERSION="0.09"/>
  <REQUIRE NAME="String::LineNumber"/>
  <REQUIRE NAME="YAML::XS"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2016-05-25 with ActivePerl-2200 on perl-stackato64-precise (Linux perl-stackato64-precise 3.2.0-24-virtual #39-Ubuntu SMP Mon May 21 18:44:18 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux) log App-SahUtils-0.28.d/log-20160525T060139.txt -->
</SOFTPKG>
>>> (cd /data/fly2200/cpanfly-5.22/var/cpan/build/App-SahUtils-0.28-ry12KM && tar cvf - App-SahUtils-0.28.ppd blib) | gzip -c >/data/fly2200/cpanfly-5.22/var/REPO/P/PE/PERLANCAR/App-SahUtils-0.28.tar.gz
App-SahUtils-0.28.ppd
blib/
blib/man3/
blib/man3/App::SahUtils.3
blib/script/
blib/script/sah-to-human
blib/script/show-sah-schema-module
blib/script/list-sah-schema-modules
blib/script/coerce-with-sah
blib/script/normalize-sah-schema
blib/script/validate-with-sah
blib/man1/
blib/man1/list-sah-schema-modules.1
blib/man1/normalize-sah-schema.1
blib/man1/sah-to-human.1
blib/man1/validate-with-sah.1
blib/man1/coerce-with-sah.1
blib/man1/show-sah-schema-module.1
blib/lib/
blib/lib/App/
blib/lib/App/SahUtils.pm
>>> mv /data/fly2200/cpanfly-5.22/var/cpan/build/App-SahUtils-0.28-ry12KM/App-SahUtils-0.28.ppd /data/fly2200/cpanfly-5.22/var/REPO/P/PE/PERLANCAR
VmSize:	  347536 kB
Finished 2016-05-25T06:02:10