PATH=/usr/bin:/bin:/data/fly2200/cpanfly-5.22/var/megalib/bin
Start 2016-08-05T02:12:42
ActivePerl-2200 CPAN-2.10
Reading '/data/fly2200/cpanfly-5.22/var/cpan/Metadata'
  Database was generated on Thu, 04 Aug 2016 05:41:02 GMT
Checksum for /data/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz ok
Perinci-Sub-Complete-0.86/
Perinci-Sub-Complete-0.86/README
Perinci-Sub-Complete-0.86/lib/
Perinci-Sub-Complete-0.86/lib/Perinci/
Perinci-Sub-Complete-0.86/lib/Perinci/Sub/
Perinci-Sub-Complete-0.86/lib/Perinci/Sub/Complete.pm
Perinci-Sub-Complete-0.86/Makefile.PL
Perinci-Sub-Complete-0.86/Changes
Perinci-Sub-Complete-0.86/dist.ini
Perinci-Sub-Complete-0.86/LICENSE
Perinci-Sub-Complete-0.86/t/
Perinci-Sub-Complete-0.86/t/00-compile.t
Perinci-Sub-Complete-0.86/t/complete_from_schema.t
Perinci-Sub-Complete-0.86/t/complete_cli_arg.t
Perinci-Sub-Complete-0.86/t/complete_arg_val.t
Perinci-Sub-Complete-0.86/t/release-rinci.t
Perinci-Sub-Complete-0.86/t/complete_arg_elem.t
Perinci-Sub-Complete-0.86/t/author-pod-syntax.t
Perinci-Sub-Complete-0.86/t/author-pod-coverage.t
Perinci-Sub-Complete-0.86/weaver.ini
Perinci-Sub-Complete-0.86/MANIFEST
Perinci-Sub-Complete-0.86/META.json
Perinci-Sub-Complete-0.86/META.yml
Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz with Makefile.PL
>>> /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2200/cpanfly-5.22/var/megalib
Want /home/fly2200/ap2200-299134/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Complete
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz
  /data/fly2200/ap2200-299134/bin/perl-static Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz
>>> make
cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm
Manifying 1 pod document
  PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2200/ap2200-299134/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..1
ok 1 - Perinci/Sub/Complete.pm loaded ok
ok
t/author-pod-coverage.t ... skipped: these tests are for testing by the author
t/author-pod-syntax.t ..... skipped: these tests are for testing by the author
t/complete_arg_elem.t ..... 
ok 1
1..1
ok
t/complete_arg_val.t ...... 
ok 1
1..1
ok
Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.86-48SCM9/blib/lib /data/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.86-48SCM9/blib/arch /data/fly2200/cpanfly-5.22/var/megalib /data/fly2200/cpanfly-5.22/var/megalib /home/fly2200/ap2200-299134/site/lib /home/fly2200/ap2200-299134/lib .) at /data/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.
t/complete_cli_arg.t ...... 
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run 
t/complete_from_schema.t .. 
    # Subtest: schema must be normalized
    ok 1
    1..1
ok 1 - schema must be normalized
    # Subtest: is clause
    ok 1
    ok 2
    1..2
ok 2 - is clause
    # Subtest: in clause
    ok 1
    1..1
ok 3 - in clause
    # Subtest: int
        # Subtest: min/max below limit
        ok 1
        1..1
    ok 1 - min/max below limit
        # Subtest: min/xmax below limit
        ok 1
        1..1
    ok 2 - min/xmax below limit
        # Subtest: xmin/max below limit
        ok 1
        1..1
    ok 3 - xmin/max below limit
        # Subtest: xmin/xmax below limit
        ok 1
        1..1
    ok 4 - xmin/xmax below limit
        # Subtest: between below limit
        ok 1
        1..1
    ok 5 - between below limit
        # Subtest: xbetween below limit
        ok 1
        1..1
    ok 6 - xbetween below limit
        # Subtest: digit by digit completion
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        ok 6
        ok 7
        1..7
    ok 7 - digit by digit completion
        # Subtest: digit by digit completion, with min/max
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        1..5
    ok 8 - digit by digit completion, with min/max
    1..8
ok 4 - int
    # Subtest: float
        # Subtest: digit by digit completion
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        ok 6
        ok 7
        1..7
    ok 1 - digit by digit completion
        # Subtest: digit by digit completion, with min/max
        ok 1
        ok 2
        ok 3
        ok 4
        1..4
    ok 2 - digit by digit completion, with min/max
    1..2
ok 5 - float
    # Subtest: any
    ok 1
    ok 2
    1..2
ok 6 - any
    # Subtest: schema is based on other schema
    ok 1
    ok 2
    ok 3
    1..3
ok 7 - schema is based on other schema
1..7
ok
t/release-rinci.t ......... skipped: these tests are for release candidate testing

Test Summary Report
-------------------
t/complete_cli_arg.t    (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=8, Tests=10,  0 wallclock secs ( 0.09 usr  0.00 sys +  0.47 cusr  0.06 csys =  0.62 CPU)
Result: FAIL
Failed 1/8 test programs. 0/10 subtests failed.
make: *** [test_dynamic] Error 255
  PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz
  make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports PERLANCAR/Perinci-Sub-Complete-0.86.tar.gz
VmSize:	  320240 kB
Finished 2016-08-05T02:12:47