PATH=/usr/bin:/bin
Start 2016-08-13T06:00:27
ActivePerl-2400 CPAN-2.10
Reading '/data/fly2400/cpanfly-5.24/var/cpan/Metadata'
Database was generated on Fri, 12 Aug 2016 04:17:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/O/OA/OALDERS/Git-Helpers-0.000006.tar.gz
Can't chown '/data/fly2400/cpanfly-5.24/var/cpan/FTPstats.yml.31984' to fly2200/cpanflies: Operation not permitted
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/O/OA/OALDERS/CHECKSUMS
Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/O/OA/OALDERS/Git-Helpers-0.000006.tar.gz ok
Git-Helpers-0.000006/
Git-Helpers-0.000006/bin/
Git-Helpers-0.000006/Changes
Git-Helpers-0.000006/CONTRIBUTORS
Git-Helpers-0.000006/cpanfile
Git-Helpers-0.000006/dist.ini
Git-Helpers-0.000006/INSTALL
Git-Helpers-0.000006/lib/
Git-Helpers-0.000006/LICENSE
Git-Helpers-0.000006/Makefile.PL
Git-Helpers-0.000006/MANIFEST
Git-Helpers-0.000006/META.json
Git-Helpers-0.000006/META.yml
Git-Helpers-0.000006/perlcriticrc
Git-Helpers-0.000006/perltidyrc
Git-Helpers-0.000006/README
Git-Helpers-0.000006/t/
Git-Helpers-0.000006/tidyall.ini
Git-Helpers-0.000006/t/01-diag.t
Git-Helpers-0.000006/t/author-pod-coverage.t
Git-Helpers-0.000006/t/author-pod-spell.t
Git-Helpers-0.000006/t/helpers.t
Git-Helpers-0.000006/t/release-cpan-changes.t
Git-Helpers-0.000006/t/release-synopsis.t
Git-Helpers-0.000006/t/release-tidyall.t
Git-Helpers-0.000006/lib/Git/
Git-Helpers-0.000006/lib/Git/Helpers.pm
Git-Helpers-0.000006/bin/gh-open
Git-Helpers-0.000006/bin/travis-open
Configuring O/OA/OALDERS/Git-Helpers-0.000006.tar.gz with Makefile.PL
>>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL
Warning: prerequisite URI::git 0 not found.
Checking if your kit is complete...
Looks good
Have /data/fly2400/cpanfly-5.24/var/megalib
Want /home/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Git::Helpers
Writing MYMETA.yml and MYMETA.json
OALDERS/Git-Helpers-0.000006.tar.gz
/data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK
Running make for O/OA/OALDERS/Git-Helpers-0.000006.tar.gz
---- Unsatisfied dependencies detected during ----
---- OALDERS/Git-Helpers-0.000006.tar.gz ----
URI::git [requires]
Running test for module 'URI::git'
Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/M/MI/MIYAGAWA/URI-git-0.02.tar.gz ok
URI-git-0.02/
URI-git-0.02/.gitignore
URI-git-0.02/Changes
URI-git-0.02/inc/
URI-git-0.02/inc/Module/
URI-git-0.02/inc/Module/Install/
URI-git-0.02/inc/Module/Install/AuthorTests.pm
URI-git-0.02/inc/Module/Install/Base.pm
URI-git-0.02/inc/Module/Install/Can.pm
URI-git-0.02/inc/Module/Install/Fetch.pm
URI-git-0.02/inc/Module/Install/Include.pm
URI-git-0.02/inc/Module/Install/Makefile.pm
URI-git-0.02/inc/Module/Install/Metadata.pm
URI-git-0.02/inc/Module/Install/Repository.pm
URI-git-0.02/inc/Module/Install/TestBase.pm
URI-git-0.02/inc/Module/Install/Win32.pm
URI-git-0.02/inc/Module/Install/WriteAll.pm
URI-git-0.02/inc/Module/Install.pm
URI-git-0.02/inc/Spiffy.pm
URI-git-0.02/inc/Test/
URI-git-0.02/inc/Test/Base/
URI-git-0.02/inc/Test/Base/Filter.pm
URI-git-0.02/inc/Test/Base.pm
URI-git-0.02/inc/Test/Builder/
URI-git-0.02/inc/Test/Builder/Module.pm
URI-git-0.02/inc/Test/Builder.pm
URI-git-0.02/inc/Test/More.pm
URI-git-0.02/lib/
URI-git-0.02/lib/URI/
URI-git-0.02/lib/URI/git.pm
URI-git-0.02/Makefile.PL
URI-git-0.02/MANIFEST
URI-git-0.02/META.yml
URI-git-0.02/README
URI-git-0.02/t/
URI-git-0.02/t/00_compile.t
URI-git-0.02/t/01_git.t
URI-git-0.02/xt/
URI-git-0.02/xt/perlcritic.t
URI-git-0.02/xt/pod.t
URI-git-0.02/xt/podspell.t
URI-git-0.02/xt/synopsis.t
Configuring M/MI/MIYAGAWA/URI-git-0.02.tar.gz with Makefile.PL
>>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /data/fly2400/cpanfly-5.24/var/megalib
Want /home/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [x86_64-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for URI::git
Writing MYMETA.yml and MYMETA.json
MIYAGAWA/URI-git-0.02.tar.gz
/data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK
Running make for M/MI/MIYAGAWA/URI-git-0.02.tar.gz
>>> make
cp lib/URI/git.pm blib/lib/URI/git.pm
Manifying 1 pod document
MIYAGAWA/URI-git-0.02.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t
Possible precedence issue with control flow operator at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Test/Builder.pm line 858.
t/00_compile.t ..
1..1
ok 1 - use URI::git;
ok
Possible precedence issue with control flow operator at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Test/Builder.pm line 858.
Redundant argument in sprintf at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Spiffy.pm line 225.
Redundant argument in sprintf at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Spiffy.pm line 225.
Redundant argument in sprintf at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Spiffy.pm line 225.
Redundant argument in sprintf at /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/inc/Spiffy.pm line 225.
t/01_git.t ......
1..2
ok 1
ok 2
ok
All tests successful.
Files=2, Tests=3, 1 wallclock secs ( 0.03 usr 0.01 sys + 0.14 cusr 0.02 csys = 0.20 CPU)
Result: PASS
MIYAGAWA/URI-git-0.02.tar.gz
make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/M/MI/MIYAGAWA/CHECKSUMS
Tatsuhiko Miyagawa <miyagawa@bulknews.net>
git URI scheme
>>> (cd /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI && tar cvf - URI-git-0.02.ppd blib) | gzip -c >/data/fly2400/cpanfly-5.24/var/REPO/M/MI/MIYAGAWA/URI-git-0.02.tar.gz
URI-git-0.02.ppd
blib/
blib/man3/
blib/man3/URI::git.3
blib/lib/
blib/lib/URI/
blib/lib/URI/git.pm
OALDERS/Git-Helpers-0.000006.tar.gz
Has already been unwrapped into directory /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Git-Helpers-0.000006-6TR6YA
OALDERS/Git-Helpers-0.000006.tar.gz
Has already been prepared
Running make for O/OA/OALDERS/Git-Helpers-0.000006.tar.gz
Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Git/Helpers.pm blib/lib/Git/Helpers.pm
cp bin/gh-open blib/script/gh-open
"/data/fly2400/ap2400-300558/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/gh-open
cp bin/travis-open blib/script/travis-open
"/data/fly2400/ap2400-300558/bin/perl-static" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/travis-open
Manifying 2 pod documents
Manifying 1 pod document
OALDERS/Git-Helpers-0.000006.tar.gz
make -- OK
Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/URI-git-0.02-hQtDHI/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01-diag.t ...............
ok 1 - got version git version 1.7.9.5
#
1..1
ok
t/author-pod-coverage.t ... skipped: these tests are for testing by the author
t/author-pod-spell.t ...... skipped: these tests are for testing by the author
fatal: Not a git repository (or any of the parent directories): .git
t/helpers.t ...............
ok 1 - got root /tmp/ErKFu_jQDi
ok 2 - got root /tmp/ErKFu_jQDi
ok 3 - root matches work_tree
ok 4 # skip git version 1.7.9.5
# is lower than 2.7
ok 5 # skip git version 1.7.9.5
# is lower than 2.7
ok 6 - dies on missing git repository
1..6
ok
t/release-cpan-changes.t .. skipped: these tests are for release candidate testing
t/release-synopsis.t ...... skipped: these tests are for release candidate testing
t/release-tidyall.t ....... skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=7, 0 wallclock secs ( 0.03 usr 0.03 sys + 0.31 cusr 0.12 csys = 0.49 CPU)
Result: PASS
OALDERS/Git-Helpers-0.000006.tar.gz
make test TEST_VERBOSE=1 -- OK
Olaf Alders <olaf@wundersolutions.com>
Shortcuts for common Git commands
>>> (cd /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Git-Helpers-0.000006-6TR6YA && tar cvf - Git-Helpers-0.000006.ppd blib) | gzip -c >/data/fly2400/cpanfly-5.24/var/REPO/O/OA/OALDERS/Git-Helpers-0.000006.tar.gz
Git-Helpers-0.000006.ppd
blib/
blib/man3/
blib/man3/Git::Helpers.3
blib/script/
blib/script/travis-open
blib/script/gh-open
blib/man1/
blib/man1/gh-open.1
blib/man1/travis-open.1
blib/lib/
blib/lib/Git/
blib/lib/Git/Helpers.pm
VmSize: 347648 kB
Finished 2016-08-13T06:00:38