PATH=/usr/bin:/bin:/data/fly2400/cpanfly-5.24/var/megalib/bin Start 2016-10-28T08:06:13 ActivePerl-2400 CPAN-2.10 Reading '/data/fly2400/cpanfly-5.24/var/cpan/Metadata' Database was generated on Fri, 28 Oct 2016 05:29:02 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz ok Perinci-Sub-Complete-0.87/ Perinci-Sub-Complete-0.87/README Perinci-Sub-Complete-0.87/lib/ Perinci-Sub-Complete-0.87/lib/Perinci/ Perinci-Sub-Complete-0.87/lib/Perinci/Sub/ Perinci-Sub-Complete-0.87/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.87/Makefile.PL Perinci-Sub-Complete-0.87/Changes Perinci-Sub-Complete-0.87/dist.ini Perinci-Sub-Complete-0.87/LICENSE Perinci-Sub-Complete-0.87/t/ Perinci-Sub-Complete-0.87/t/00-compile.t Perinci-Sub-Complete-0.87/t/complete_from_schema.t Perinci-Sub-Complete-0.87/t/complete_cli_arg.t Perinci-Sub-Complete-0.87/t/complete_arg_val.t Perinci-Sub-Complete-0.87/t/release-rinci.t Perinci-Sub-Complete-0.87/t/complete_arg_elem.t Perinci-Sub-Complete-0.87/t/author-pod-syntax.t Perinci-Sub-Complete-0.87/t/author-pod-coverage.t Perinci-Sub-Complete-0.87/weaver.ini Perinci-Sub-Complete-0.87/MANIFEST Perinci-Sub-Complete-0.87/META.json Perinci-Sub-Complete-0.87/META.yml Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Warning: prerequisite Complete::Getopt::Long 0.43 not found. We have 0.42. Warning: prerequisite Perinci::Sub::GetArgs::Argv 0.75 not found. We have 0.72. Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz ---- Perinci::Sub::GetArgs::Argv [requires] Complete::Getopt::Long [requires] Running test for module 'Perinci::Sub::GetArgs::Argv' Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz ok Perinci-Sub-GetArgs-Argv-0.75/ Perinci-Sub-GetArgs-Argv-0.75/README Perinci-Sub-GetArgs-Argv-0.75/lib/ Perinci-Sub-GetArgs-Argv-0.75/lib/Perinci/ Perinci-Sub-GetArgs-Argv-0.75/lib/Perinci/Sub/ Perinci-Sub-GetArgs-Argv-0.75/lib/Perinci/Sub/GetArgs/ Perinci-Sub-GetArgs-Argv-0.75/lib/Perinci/Sub/GetArgs/Argv.pm Perinci-Sub-GetArgs-Argv-0.75/Makefile.PL Perinci-Sub-GetArgs-Argv-0.75/Changes Perinci-Sub-GetArgs-Argv-0.75/dist.ini Perinci-Sub-GetArgs-Argv-0.75/LICENSE Perinci-Sub-GetArgs-Argv-0.75/t/ Perinci-Sub-GetArgs-Argv-0.75/t/00-compile.t Perinci-Sub-GetArgs-Argv-0.75/t/gen_getopt_long_spec_from_meta.t Perinci-Sub-GetArgs-Argv-0.75/t/get_args_from_argv.t Perinci-Sub-GetArgs-Argv-0.75/t/release-rinci.t Perinci-Sub-GetArgs-Argv-0.75/t/author-pod-syntax.t Perinci-Sub-GetArgs-Argv-0.75/t/author-pod-coverage.t Perinci-Sub-GetArgs-Argv-0.75/weaver.ini Perinci-Sub-GetArgs-Argv-0.75/MANIFEST Perinci-Sub-GetArgs-Argv-0.75/META.json Perinci-Sub-GetArgs-Argv-0.75/META.yml Configuring P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::GetArgs::Argv Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz >>> make cp lib/Perinci/Sub/GetArgs/Argv.pm blib/lib/Perinci/Sub/GetArgs/Argv.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ...................... 1..1 ok 1 - Perinci/Sub/GetArgs/Argv.pm loaded ok ok t/author-pod-coverage.t ............. skipped: these tests are for testing by the author t/author-pod-syntax.t ............... skipped: these tests are for testing by the author Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.75-FFHJGw/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.75-FFHJGw/blib/arch /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. t/gen_getopt_long_spec_from_meta.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run # No tests run! # Failed test 'No tests run for subtest "optional missing = ok"' # at t/get_args_from_argv.t line 717. Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.75-FFHJGw/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.75-FFHJGw/blib/arch /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/get_args_from_argv.t .............. # Subtest: optional missing = ok 1..0 not ok 1 - No tests run for subtest "optional missing = ok" Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/release-rinci.t ................... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/gen_getopt_long_spec_from_meta.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/get_args_from_argv.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=6, Tests=2, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.31 cusr 0.07 csys = 0.43 CPU) Result: FAIL Failed 2/6 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz Running test for module 'Complete::Getopt::Long' Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Complete-Getopt-Long-0.43.tar.gz Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Getopt-Long-0.43.tar.gz ok Complete-Getopt-Long-0.43/ Complete-Getopt-Long-0.43/README Complete-Getopt-Long-0.43/lib/ Complete-Getopt-Long-0.43/lib/Complete/ Complete-Getopt-Long-0.43/lib/Complete/Getopt/ Complete-Getopt-Long-0.43/lib/Complete/Getopt/Long.pm Complete-Getopt-Long-0.43/Makefile.PL Complete-Getopt-Long-0.43/Changes Complete-Getopt-Long-0.43/dist.ini Complete-Getopt-Long-0.43/LICENSE Complete-Getopt-Long-0.43/t/ Complete-Getopt-Long-0.43/t/00-compile.t Complete-Getopt-Long-0.43/t/complete_cli_arg.t Complete-Getopt-Long-0.43/t/release-rinci.t Complete-Getopt-Long-0.43/t/author-pod-syntax.t Complete-Getopt-Long-0.43/t/author-pod-coverage.t Complete-Getopt-Long-0.43/weaver.ini Complete-Getopt-Long-0.43/MANIFEST Complete-Getopt-Long-0.43/META.json Complete-Getopt-Long-0.43/META.yml Configuring P/PE/PERLANCAR/Complete-Getopt-Long-0.43.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Complete::Getopt::Long Writing MYMETA.yml and MYMETA.json PERLANCAR/Complete-Getopt-Long-0.43.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.43.tar.gz >>> make cp lib/Complete/Getopt/Long.pm blib/lib/Complete/Getopt/Long.pm Manifying 1 pod document PERLANCAR/Complete-Getopt-Long-0.43.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Complete/Getopt/Long.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author t/complete_cli_arg.t ..... # Subtest: basics # Subtest: option name ok 1 - result 1..1 ok 1 - option name # Subtest: option name (2) ok 1 - result 1..1 ok 2 - option name (2) # Subtest: option name (3) ok 1 - result 1..1 ok 3 - option name (3) # Subtest: option name (single letter n! does not get --nox and --no-x) ok 1 - result 1..1 ok 4 - option name (single letter n! does not get --nox and --no-x) # Subtest: option name (bundling) ok 1 - result 1..1 ok 5 - option name (bundling) # Subtest: option name (bundling), bundling=0 ok 1 - result 1..1 ok 6 - option name (bundling), bundling=0 # Subtest: option name (bundling, stops after value expected) ok 1 - result 1..1 ok 7 - option name (bundling, stops after value expected) # Subtest: option name (bundling 2) ok 1 - result 1..1 ok 8 - option name (bundling 2) # Subtest: option name with mentioned non-repeatable option (alias) ok 1 - result 1..1 ok 9 - option name with mentioned non-repeatable option (alias) # Subtest: option name with mentioned non-repeatable option (alias 2) ok 1 - result 1..1 ok 10 - option name with mentioned non-repeatable option (alias 2) # Subtest: option name with mentioned non-repeatable option (bundling) ok 1 - result 1..1 ok 11 - option name with mentioned non-repeatable option (bundling) # Subtest: repeatable option name 1 (assigned to arrayref) ok 1 - result 1..1 ok 12 - repeatable option name 1 (assigned to arrayref) # Subtest: repeatable option name 2 (desttype @) ok 1 - result 1..1 ok 13 - repeatable option name 2 (desttype @) # Subtest: repeatable option name 3 (desttype %) ok 1 - result 1..1 ok 14 - repeatable option name 3 (desttype %) # Subtest: repeatable option name 4 (incremental) ok 1 - result 1..1 ok 15 - repeatable option name 4 (incremental) # Subtest: option name + arg completion ok 1 - result 1..1 ok 16 - option name + arg completion # Subtest: option name ok 1 - result 1..1 ok 17 - option name # Subtest: option value without completion routine ok 1 - result 1..1 ok 18 - option value without completion routine # Subtest: option value without completion routine (2) ok 1 - result 1..1 ok 19 - option value without completion routine (2) # Subtest: option value for unknown option ok 1 - result 1..1 ok 20 - option value for unknown option # Subtest: option value for option that does not expect value ok 1 - result 1..1 ok 21 - option value for option that does not expect value # Subtest: option value with completion routine returning array ok 1 - result 1..1 ok 22 - option value with completion routine returning array # Subtest: extras argument ok 1 - result 1..1 ok 23 - extras argument 1..23 ok 1 - basics # Subtest: config bundling=0 # Subtest: basics ok 1 - result 1..1 ok 1 - basics 1..1 ok 2 - config bundling=0 # Subtest: default fallback completion # Subtest: file fallback completion ok 1 - result 1..1 ok 1 - file fallback completion 1..1 ok 3 - default fallback completion 1..3 ok t/release-rinci.t ........ skipped: these tests are for release candidate testing All tests successful. Files=5, Tests=4, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.33 cusr 0.04 csys = 0.42 CPU) Result: PASS PERLANCAR/Complete-Getopt-Long-0.43.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Complete command-line argument using Getopt::Long specification >>> (cd /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN && tar cvf - Complete-Getopt-Long-0.43.ppd blib) | gzip -c >/data/fly2400/cpanfly-5.24/var/REPO/P/PE/PERLANCAR/Complete-Getopt-Long-0.43.tar.gz Complete-Getopt-Long-0.43.ppd blib/ blib/man3/ blib/man3/Complete::Getopt::Long.3 blib/lib/ blib/lib/Complete/ blib/lib/Complete/Getopt/ blib/lib/Complete/Getopt/Long.pm PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz Has already been unwrapped into directory /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.87-_3KA1o PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/lib to PERL5LIB for 'make' Warning: Prerequisite 'Perinci::Sub::GetArgs::Argv => 0.75' for 'PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-GetArgs-Argv-0.75.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz make -- OK Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/author-pod-coverage.t ... skipped: these tests are for testing by the author t/author-pod-syntax.t ..... skipped: these tests are for testing by the author t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.87-_3KA1o/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.87-_3KA1o/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/lib /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.43-Wf3vEN/blib/lib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. t/complete_cli_arg.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/complete_from_schema.t .. # Subtest: schema must be normalized ok 1 1..1 ok 1 - schema must be normalized # Subtest: is clause ok 1 ok 2 1..2 ok 2 - is clause # Subtest: in clause ok 1 1..1 ok 3 - in clause # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 4 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 5 - float # Subtest: any ok 1 ok 2 1..2 ok 6 - any # Subtest: schema is based on other schema ok 1 ok 2 ok 3 1..3 ok 7 - schema is based on other schema 1..7 ok t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=8, Tests=10, 1 wallclock secs ( 0.05 usr 0.03 sys + 0.62 cusr 0.12 csys = 0.82 CPU) Result: FAIL Failed 1/8 test programs. 0/10 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Complete-0.87.tar.gz VmSize: 346116 kB Finished 2016-10-28T08:06:28