PATH=/usr/bin:/bin:/data/fly2400/cpanfly-5.24/var/megalib/bin Start 2016-12-11T04:08:10 ActivePerl-2400 CPAN-2.10 Reading '/data/fly2400/cpanfly-5.24/var/cpan/Metadata' Database was generated on Sun, 11 Dec 2016 06:41:02 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/CHECKSUMS Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz ok Perinci-Sub-Complete-0.89/ Perinci-Sub-Complete-0.89/META.json Perinci-Sub-Complete-0.89/LICENSE Perinci-Sub-Complete-0.89/Changes Perinci-Sub-Complete-0.89/META.yml Perinci-Sub-Complete-0.89/Makefile.PL Perinci-Sub-Complete-0.89/t/ Perinci-Sub-Complete-0.89/t/author-pod-coverage.t Perinci-Sub-Complete-0.89/t/complete_arg_index.t Perinci-Sub-Complete-0.89/t/complete_cli_arg.t Perinci-Sub-Complete-0.89/t/complete_from_schema.t Perinci-Sub-Complete-0.89/t/complete_arg_elem.t Perinci-Sub-Complete-0.89/t/complete_arg_val.t Perinci-Sub-Complete-0.89/t/release-rinci.t Perinci-Sub-Complete-0.89/t/author-pod-syntax.t Perinci-Sub-Complete-0.89/t/00-compile.t Perinci-Sub-Complete-0.89/README Perinci-Sub-Complete-0.89/dist.ini Perinci-Sub-Complete-0.89/lib/ Perinci-Sub-Complete-0.89/lib/Perinci/ Perinci-Sub-Complete-0.89/lib/Perinci/Sub/ Perinci-Sub-Complete-0.89/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.89/MANIFEST Perinci-Sub-Complete-0.89/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Warning: prerequisite Perinci::Examples 0.77 not found. We have 0.76. Warning: prerequisite Perinci::Sub::GetArgs::Argv 0.78 not found. We have 0.72. Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz ---- Perinci::Sub::GetArgs::Argv [requires] Perinci::Examples [build_requires] Running test for module 'Perinci::Sub::GetArgs::Argv' Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz ok Perinci-Sub-GetArgs-Argv-0.78/ Perinci-Sub-GetArgs-Argv-0.78/README Perinci-Sub-GetArgs-Argv-0.78/dist.ini Perinci-Sub-GetArgs-Argv-0.78/Makefile.PL Perinci-Sub-GetArgs-Argv-0.78/META.yml Perinci-Sub-GetArgs-Argv-0.78/t/ Perinci-Sub-GetArgs-Argv-0.78/t/author-pod-syntax.t Perinci-Sub-GetArgs-Argv-0.78/t/release-rinci.t Perinci-Sub-GetArgs-Argv-0.78/t/00-compile.t Perinci-Sub-GetArgs-Argv-0.78/t/get_args_from_argv.t Perinci-Sub-GetArgs-Argv-0.78/t/gen_getopt_long_spec_from_meta.t Perinci-Sub-GetArgs-Argv-0.78/t/author-pod-coverage.t Perinci-Sub-GetArgs-Argv-0.78/weaver.ini Perinci-Sub-GetArgs-Argv-0.78/META.json Perinci-Sub-GetArgs-Argv-0.78/MANIFEST Perinci-Sub-GetArgs-Argv-0.78/lib/ Perinci-Sub-GetArgs-Argv-0.78/lib/Perinci/ Perinci-Sub-GetArgs-Argv-0.78/lib/Perinci/Sub/ Perinci-Sub-GetArgs-Argv-0.78/lib/Perinci/Sub/GetArgs/ Perinci-Sub-GetArgs-Argv-0.78/lib/Perinci/Sub/GetArgs/Argv.pm Perinci-Sub-GetArgs-Argv-0.78/LICENSE Perinci-Sub-GetArgs-Argv-0.78/Changes Configuring P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Warning: prerequisite Perinci::Sub::GetArgs::Array 0.16 not found. We have 0.15. Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::GetArgs::Argv Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz ---- Perinci::Sub::GetArgs::Array [requires] Running test for module 'Perinci::Sub::GetArgs::Array' Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz ok Perinci-Sub-GetArgs-Array-0.16/ Perinci-Sub-GetArgs-Array-0.16/README Perinci-Sub-GetArgs-Array-0.16/dist.ini Perinci-Sub-GetArgs-Array-0.16/Makefile.PL Perinci-Sub-GetArgs-Array-0.16/META.yml Perinci-Sub-GetArgs-Array-0.16/t/ Perinci-Sub-GetArgs-Array-0.16/t/author-pod-syntax.t Perinci-Sub-GetArgs-Array-0.16/t/release-rinci.t Perinci-Sub-GetArgs-Array-0.16/t/00-compile.t Perinci-Sub-GetArgs-Array-0.16/t/01-basics.t Perinci-Sub-GetArgs-Array-0.16/t/author-pod-coverage.t Perinci-Sub-GetArgs-Array-0.16/weaver.ini Perinci-Sub-GetArgs-Array-0.16/META.json Perinci-Sub-GetArgs-Array-0.16/MANIFEST Perinci-Sub-GetArgs-Array-0.16/lib/ Perinci-Sub-GetArgs-Array-0.16/lib/Perinci/ Perinci-Sub-GetArgs-Array-0.16/lib/Perinci/Sub/ Perinci-Sub-GetArgs-Array-0.16/lib/Perinci/Sub/GetArgs/ Perinci-Sub-GetArgs-Array-0.16/lib/Perinci/Sub/GetArgs/Array.pm Perinci-Sub-GetArgs-Array-0.16/LICENSE Perinci-Sub-GetArgs-Array-0.16/Changes Configuring P/PE/PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::GetArgs::Array Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz >>> make cp lib/Perinci/Sub/GetArgs/Array.pm blib/lib/Perinci/Sub/GetArgs/Array.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Perinci/Sub/GetArgs/Array.pm loaded ok ok # No tests run! # Failed test 'No tests run for subtest "no arg -> ok"' # at t/01-basics.t line 156. Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Array-0.16-YndQkI/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Array-0.16-YndQkI/blib/arch /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/01-basics.t ............ # Subtest: no arg -> ok 1..0 not ok 1 - No tests run for subtest "no arg -> ok" Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author t/release-rinci.t ........ skipped: these tests are for release candidate testing Test Summary Report ------------------- t/01-basics.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=5, Tests=2, 0 wallclock secs ( 0.02 usr 0.03 sys + 0.16 cusr 0.01 csys = 0.22 CPU) Result: FAIL Failed 1/5 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz Has already been unwrapped into directory /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.78-lFKahM PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz Warning: Prerequisite 'Perinci::Sub::GetArgs::Array => 0.16' for 'PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-GetArgs-Array-0.16.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/Sub/GetArgs/Argv.pm blib/lib/Perinci/Sub/GetArgs/Argv.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ...................... 1..1 ok 1 - Perinci/Sub/GetArgs/Argv.pm loaded ok ok t/author-pod-coverage.t ............. skipped: these tests are for testing by the author t/author-pod-syntax.t ............... skipped: these tests are for testing by the author Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.78-lFKahM/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.78-lFKahM/blib/arch /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. t/gen_getopt_long_spec_from_meta.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run # No tests run! # Failed test 'No tests run for subtest "optional missing = ok"' # at t/get_args_from_argv.t line 748. Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.78-lFKahM/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.78-lFKahM/blib/arch /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 255 just after 1. t/get_args_from_argv.t .............. # Subtest: optional missing = ok 1..0 not ok 1 - No tests run for subtest "optional missing = ok" Dubious, test returned 255 (wstat 65280, 0xff00) Failed 1/1 subtests t/release-rinci.t ................... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/gen_getopt_long_spec_from_meta.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/get_args_from_argv.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=6, Tests=2, 0 wallclock secs ( 0.03 usr 0.04 sys + 0.27 cusr 0.04 csys = 0.38 CPU) Result: FAIL Failed 2/6 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz Running test for module 'Perinci::Examples' Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Perinci-Examples-0.77.tar.gz Checksum for /data/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Examples-0.77.tar.gz ok Perinci-Examples-0.77/ Perinci-Examples-0.77/META.json Perinci-Examples-0.77/LICENSE Perinci-Examples-0.77/Changes Perinci-Examples-0.77/META.yml Perinci-Examples-0.77/Makefile.PL Perinci-Examples-0.77/t/ Perinci-Examples-0.77/t/author-pod-coverage.t Perinci-Examples-0.77/t/release-rinci.t Perinci-Examples-0.77/t/author-pod-syntax.t Perinci-Examples-0.77/t/00-compile.t Perinci-Examples-0.77/README Perinci-Examples-0.77/dist.ini Perinci-Examples-0.77/lib/ Perinci-Examples-0.77/lib/Perinci/ Perinci-Examples-0.77/lib/Perinci/Examples/ Perinci-Examples-0.77/lib/Perinci/Examples/Version.pm Perinci-Examples-0.77/lib/Perinci/Examples/CmdLineResMeta.pm Perinci-Examples-0.77/lib/Perinci/Examples/CSV.pm Perinci-Examples-0.77/lib/Perinci/Examples/FilePartial.pm Perinci-Examples-0.77/lib/Perinci/Examples/Coercion.pm Perinci-Examples-0.77/lib/Perinci/Examples/CLI.pm Perinci-Examples-0.77/lib/Perinci/Examples/Tiny.pm Perinci-Examples-0.77/lib/Perinci/Examples/Table.pm Perinci-Examples-0.77/lib/Perinci/Examples/SubMeta.pm Perinci-Examples-0.77/lib/Perinci/Examples/CmdLineSrc.pm Perinci-Examples-0.77/lib/Perinci/Examples/Completion.pm Perinci-Examples-0.77/lib/Perinci/Examples/FileStream.pm Perinci-Examples-0.77/lib/Perinci/Examples/Tx.pm Perinci-Examples-0.77/lib/Perinci/Examples/Tiny/ Perinci-Examples-0.77/lib/Perinci/Examples/Tiny/Result.pm Perinci-Examples-0.77/lib/Perinci/Examples/Tiny/Args.pm Perinci-Examples-0.77/lib/Perinci/Examples/Stream.pm Perinci-Examples-0.77/lib/Perinci/Examples/ResultNaked.pm Perinci-Examples-0.77/lib/Perinci/Examples/NoMeta.pm Perinci-Examples-0.77/lib/Perinci/Examples/ArgsAs.pm Perinci-Examples-0.77/lib/Perinci/Examples.pm Perinci-Examples-0.77/MANIFEST Perinci-Examples-0.77/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Examples-0.77.tar.gz with Makefile.PL >>> /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /data/fly2400/cpanfly-5.24/var/megalib Want /home/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [x86_64-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Examples Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Examples-0.77.tar.gz /data/fly2400/ap2400-300558/bin/perl-static Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Examples-0.77.tar.gz >>> make cp lib/Perinci/Examples/Tiny/Result.pm blib/lib/Perinci/Examples/Tiny/Result.pm cp lib/Perinci/Examples/Version.pm blib/lib/Perinci/Examples/Version.pm cp lib/Perinci/Examples/CmdLineSrc.pm blib/lib/Perinci/Examples/CmdLineSrc.pm cp lib/Perinci/Examples/SubMeta.pm blib/lib/Perinci/Examples/SubMeta.pm cp lib/Perinci/Examples/NoMeta.pm blib/lib/Perinci/Examples/NoMeta.pm cp lib/Perinci/Examples/CSV.pm blib/lib/Perinci/Examples/CSV.pm cp lib/Perinci/Examples/Stream.pm blib/lib/Perinci/Examples/Stream.pm cp lib/Perinci/Examples/CmdLineResMeta.pm blib/lib/Perinci/Examples/CmdLineResMeta.pm cp lib/Perinci/Examples/ArgsAs.pm blib/lib/Perinci/Examples/ArgsAs.pm cp lib/Perinci/Examples/CLI.pm blib/lib/Perinci/Examples/CLI.pm cp lib/Perinci/Examples/FileStream.pm blib/lib/Perinci/Examples/FileStream.pm cp lib/Perinci/Examples/FilePartial.pm blib/lib/Perinci/Examples/FilePartial.pm cp lib/Perinci/Examples/Completion.pm blib/lib/Perinci/Examples/Completion.pm cp lib/Perinci/Examples/ResultNaked.pm blib/lib/Perinci/Examples/ResultNaked.pm cp lib/Perinci/Examples/Tiny/Args.pm blib/lib/Perinci/Examples/Tiny/Args.pm cp lib/Perinci/Examples/Table.pm blib/lib/Perinci/Examples/Table.pm cp lib/Perinci/Examples/Tx.pm blib/lib/Perinci/Examples/Tx.pm cp lib/Perinci/Examples/Tiny.pm blib/lib/Perinci/Examples/Tiny.pm cp lib/Perinci/Examples/Coercion.pm blib/lib/Perinci/Examples/Coercion.pm cp lib/Perinci/Examples.pm blib/lib/Perinci/Examples.pm Manifying 20 pod documents PERLANCAR/Perinci-Examples-0.77.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..20 ok 1 - Perinci/Examples.pm loaded ok ok 2 - Perinci/Examples/ArgsAs.pm loaded ok ok 3 - Perinci/Examples/CLI.pm loaded ok ok 4 - Perinci/Examples/CSV.pm loaded ok ok 5 - Perinci/Examples/CmdLineResMeta.pm loaded ok ok 6 - Perinci/Examples/CmdLineSrc.pm loaded ok ok 7 - Perinci/Examples/Coercion.pm loaded ok ok 8 - Perinci/Examples/Completion.pm loaded ok ok 9 - Perinci/Examples/FilePartial.pm loaded ok ok 10 - Perinci/Examples/FileStream.pm loaded ok ok 11 - Perinci/Examples/NoMeta.pm loaded ok ok 12 - Perinci/Examples/ResultNaked.pm loaded ok ok 13 - Perinci/Examples/Stream.pm loaded ok ok 14 - Perinci/Examples/SubMeta.pm loaded ok ok 15 - Perinci/Examples/Table.pm loaded ok ok 16 - Perinci/Examples/Tiny.pm loaded ok ok 17 - Perinci/Examples/Tiny/Args.pm loaded ok ok 18 - Perinci/Examples/Tiny/Result.pm loaded ok ok 19 - Perinci/Examples/Tx.pm loaded ok ok 20 - Perinci/Examples/Version.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author t/release-rinci.t ........ skipped: these tests are for release candidate testing All tests successful. Files=4, Tests=20, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.34 cusr 0.20 csys = 0.59 CPU) Result: PASS PERLANCAR/Perinci-Examples-0.77.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Various examples of Rinci metadata >>> (cd /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF && tar cvf - Perinci-Examples-0.77.ppd blib) | gzip -c >/data/fly2400/cpanfly-5.24/var/REPO/P/PE/PERLANCAR/Perinci-Examples-0.77.tar.gz Perinci-Examples-0.77.ppd blib/ blib/man3/ blib/man3/Perinci::Examples::Coercion.3 blib/man3/Perinci::Examples::Completion.3 blib/man3/Perinci::Examples::ArgsAs.3 blib/man3/Perinci::Examples::CSV.3 blib/man3/Perinci::Examples::FilePartial.3 blib/man3/Perinci::Examples::SubMeta.3 blib/man3/Perinci::Examples::Tiny.3 blib/man3/Perinci::Examples.3 blib/man3/Perinci::Examples::CmdLineSrc.3 blib/man3/Perinci::Examples::Version.3 blib/man3/Perinci::Examples::Tiny::Args.3 blib/man3/Perinci::Examples::Tiny::Result.3 blib/man3/Perinci::Examples::CmdLineResMeta.3 blib/man3/Perinci::Examples::ResultNaked.3 blib/man3/Perinci::Examples::FileStream.3 blib/man3/Perinci::Examples::Tx.3 blib/man3/Perinci::Examples::Stream.3 blib/man3/Perinci::Examples::Table.3 blib/man3/Perinci::Examples::CLI.3 blib/man3/Perinci::Examples::NoMeta.3 blib/lib/ blib/lib/Perinci/ blib/lib/Perinci/Examples/ blib/lib/Perinci/Examples/ResultNaked.pm blib/lib/Perinci/Examples/CmdLineSrc.pm blib/lib/Perinci/Examples/Tx.pm blib/lib/Perinci/Examples/NoMeta.pm blib/lib/Perinci/Examples/Completion.pm blib/lib/Perinci/Examples/Tiny/ blib/lib/Perinci/Examples/Tiny/Args.pm blib/lib/Perinci/Examples/Tiny/Result.pm blib/lib/Perinci/Examples/FilePartial.pm blib/lib/Perinci/Examples/Stream.pm blib/lib/Perinci/Examples/Coercion.pm blib/lib/Perinci/Examples/CmdLineResMeta.pm blib/lib/Perinci/Examples/Version.pm blib/lib/Perinci/Examples/SubMeta.pm blib/lib/Perinci/Examples/CLI.pm blib/lib/Perinci/Examples/CSV.pm blib/lib/Perinci/Examples/Tiny.pm blib/lib/Perinci/Examples/FileStream.pm blib/lib/Perinci/Examples/ArgsAs.pm blib/lib/Perinci/Examples/Table.pm blib/lib/Perinci/Examples.pm PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz Has already been unwrapped into directory /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.89-AbK0Ej PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/lib to PERL5LIB for 'make' Warning: Prerequisite 'Perinci::Sub::GetArgs::Argv => 0.78' for 'PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-GetArgs-Argv-0.78.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz make -- OK Prepending /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/data/fly2400/ap2400-300558/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/author-pod-coverage.t ... skipped: these tests are for testing by the author t/author-pod-syntax.t ..... skipped: these tests are for testing by the author t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_index.t .... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.89-AbK0Ej/blib/lib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Sub-Complete-0.89-AbK0Ej/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/lib /data/fly2400/cpanfly-5.24/var/megalib /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/arch /data/fly2400/cpanfly-5.24/var/tmp/cpan_build/Perinci-Examples-0.77-ugjKdF/blib/lib /data/fly2400/cpanfly-5.24/var/megalib /home/fly2400/ap2400-300558/site/lib /home/fly2400/ap2400-300558/lib .) at /data/fly2400/cpanfly-5.24/var/megalib/Perinci/Sub/Normalize.pm line 144. t/complete_cli_arg.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/complete_from_schema.t .. # Subtest: schema must be normalized ok 1 1..1 ok 1 - schema must be normalized # Subtest: is clause ok 1 ok 2 1..2 ok 2 - is clause # Subtest: in clause ok 1 1..1 ok 3 - in clause # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 4 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 5 - float # Subtest: any ok 1 ok 2 1..2 ok 6 - any # Subtest: schema is based on other schema ok 1 ok 2 ok 3 1..3 ok 7 - schema is based on other schema 1..7 ok t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=9, Tests=11, 1 wallclock secs ( 0.05 usr 0.03 sys + 0.43 cusr 0.13 csys = 0.64 CPU) Result: FAIL Failed 1/9 test programs. 0/11 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Complete-0.89.tar.gz VmSize: 347576 kB Finished 2016-12-11T04:08:25